16mm Illuminated Pushbutton - White Latching On/Off Switch
Qty | Discount |
---|---|
1-9 | $1.95 |
10-99 | $1.76 |
100+ | $1.56 |
Description
A switch is a switch, and an LED is an LED, but this LED illuminated button is a lovely combination of both! It's a medium sized button, large enough to press easily but not too big that it gets in the way of your project panel. It has a built in LED that can be controlled separately from the switch action - either to indicate or just to look good.
The body is a black plastic with the LED built inside. There are two contacts for the button and two contacts for the LED, one marked + and one -. The forward voltage of the LED is about 3V so connect a 220 to 1000 ohm resistor in series just as you would with any other LED to your 3V or higher power supply.
This particular button has a white body and LED and is latching on/off. The two switch contacts are either connected or disconnected. When you push the button they will switch from one to the other, like an on-off switch. The LED is separated from the button, so you can make it light up when on, light up when off, always lit, etc.
16mm Illuminated Pushbutton - White Latching On/Off Switch (1:34)
Technical Details
- Max Dimensions: 18.06mm / 0.7" x 18mm / 0.7" x 29.4mm / 1.15"
- Shaft Dimensions: 14.89mm / 0.58" x 15.56mm / 0.6" x 18.7mm / 0.73"
- Button Height: 5mm / 0.2"
- Button Height Depressed: 3.5mm / 0.15"
- Weight: 4.6g
Learn
![](http://cdn-learn.adafruit.com/guides/images/000/000/421/medium640/IMG_2436.jpg)
![](http://cdn-learn.adafruit.com/guides/images/000/000/940/medium640/adafruit-coffee-cup-white-noise-thumb.jpg)
![](http://cdn-learn.adafruit.com/guides/images/000/003/117/medium640/hero-case-black.jpg)
![](http://cdn-learn.adafruit.com/guides/images/000/003/579/medium640/hero-scooter-speaker.jpg)
See our Distributors page for a complete list of distributors.