Components & Parts / Buttons

Angled shot of rugged metal pushbutton with blue led ring.

Rugged Metal Pushbutton with Blue LED Ring - 16mm Blue Momentary

Product ID: 481

These chrome-plated metal buttons are rugged and look real good while doing it! Simply drill a 16mm hole into any material up to 1/2" thick and you can fit these in place, there's even a rubber gasket to keep water out of the enclosure. On the front of the button is a flat metal actuator, surrounded by a blue plastic LED ring. On the back there are 3 contacts for the...

$4.95

In stock

Angled shot of rugged metal pushbutton with green LED ring.

Rugged Metal Pushbutton with Green LED Ring - 16mm Green Momentary

Product ID: 560

These chrome-plated metal buttons are rugged and look real good while doing it! Simply drill a 16mm hole into any material up to 1/2" thick and you can fit these in place, there's even a rubber gasket to keep water out of the enclosure. On the front of the button is a flat metal actuator, surrounded by a green plastic LED ring. On the back there are 3 contacts for...

$4.95

In stock

angled shot of single white 6mm tactile switch button.

Tactile Switch Buttons (6mm slim) x 20 pack

Product ID: 1489

Slim clicky momentary switches are standard input "buttons" on electronic projects. These are half the width of classic 6mm tactile switches so they line up better on a breadboard, just plug them into every-other row. These work best in a PCB but can be used on a solderless breadboard as shown in this tutorial. The two pins are normally open (disconnected) and when...

$4.95

In stock

Angled shot of 15 colorful square tactile button switches in green, yellow, red, blue, and white.

Colorful 12mm Square Tactile Button Switch Assortment - 15 pack

Product ID: 1010

Little clicky switches are standard input "buttons" on electronic projects. These work best in a PCB but can be used on a solderless breadboard as shown in this tutorial. The pins are normally open (disconnected) and when the button is pressed they are momentarily closed. These buttons are bigger than the 6mm ones we carry and come in a pack of 15. Each button comes...

$5.95

In stock

Angled shot of a Rugged Metal On/Off Switch with Green LED Ring.

Rugged Metal On/Off Switch with Green LED Ring - 16mm Green On/Off

Product ID: 482

These chrome-plated metal buttons are rugged and look real good while doing it! Simply drill a 16mm hole into any material up to 1/2" thick and you can fit these in place, there's even a rubber gasket to keep water out of the enclosure. On the front of the button is a flat metal actuator, surrounded by a green plastic LED ring. On the back there are 3 contacts for...

$4.95

In stock

Rugged Metal Pushbutton with Red LED Ring - 16mm Red Momentary

Product ID: 559

These chrome-plated metal buttons are rugged and look real good while doing it! Simply drill a 16mm hole into any material up to 1/2" thick and you can fit these in place, there's even a rubber gasket to keep water out of the enclosure. On the front of the button is a flat metal actuator, surrounded by a red plastic LED ring. On the back there are 3 contacts for the...

$4.95

In stock

Rugged Metal Pushbutton with White LED Ring - 16mm White Momentary

Product ID: 558

These chrome-plated metal buttons are rugged and look real good while doing it! Simply drill a 16mm hole into any material up to 1/2" thick and you can fit these in place, there's even a rubber gasket to keep water out of the enclosure. On the front of the button is a flat metal actuator, surrounded by a white plastic LED ring. On the back there are 3 contacts for...

$4.95

In stock

angled shot of 20 6mm mini tactile button switches.

Tactile Button switch (6mm) x 20 pack

Product ID: 367

Little clicky switches are standard input "buttons" on electronic projects. These work best in a PCB but can be used on a solderless breadboard as shown in this tutorial. The pins are normally open (disconnected) and when the button is pressed they are momentarily closed. They come in a pack of 20, they're pretty handy so you'll want to keep them around. You can find...

$2.50

In stock

Angled shot of a Rugged Metal On/Off Switch with Blue LED Ring.

Rugged Metal On/Off Switch with Blue LED Ring - 16mm Blue On/Off

Product ID: 915

$4.95

In stock

Top-down shot of 15 colorful round tactile button switches in green, yellow, red, blue, and white.

Colorful Round Tactile Button Switch Assortment - 15 pack

Product ID: 1009

$5.95

In stock

Head-on shot of illuminated massive red 100mm arcade button.

Massive Arcade Button with LED - 100mm Red

Product ID: 1185

OMG WATCH OUT! This 100mm diameter arcade button with a 10mm deep plastic base is so massive and inviting it may collapse upon itself and form a black hole from which not even light can escape! Until it does, however, it ready for all sorts of pressing and pushing. Science has shown no one can resist pressing its shiny surface and saying "beep!". We've seen these on...

$9.95

In stock

Rugged Metal On/Off Switch with White LED Ring - 16mm White On/Off

Product ID: 917

These chrome-plated metal buttons are rugged and look real good while doing it! Simply drill a 16mm hole into any material up to 1/2" thick and you can fit these in place, there's even a rubber gasket to keep water out of the enclosure. On the front of the button is a flat metal actuator, surrounded by a white plastic LED ring. On the back there are 3 contacts for...

$4.95

In stock

Rugged Metal On/Off Switch with Red LED Ring - 16mm Red On/Off

Product ID: 916

These chrome-plated metal buttons are rugged and look real good while doing it! Simply drill a 16mm hole into any material up to 1/2" thick and you can fit these in place, there's even a rubber gasket to keep water out of the enclosure. On the front of the button is a flat metal actuator, surrounded by a red plastic LED ring. On the back there are 3 contacts for the...

$4.95

In stock

Angled shot of a clear round 30mm arcade button.

Arcade Button - 30mm Translucent Clear

Product ID: 471

A button is a button, and a switch is a switch, but these translucent arcade buttons are in a class of their own. They're the same size as common arcade controls (often referred to as 30mm diameter) but have some nice things going for them that justify the extra dollar. First, they look fantastic, all 6 colors have a crystal translucent glossy look. Although they do...

$5.95

31 in stock

Angled shot of a rectangular white 30mm illuminated pushbutton.

LED Illuminated Pushbutton - 30mm Square

Product ID: 491

A button is a button, and a switch is a switch, but this LED illuminated arcade buttons is in a class of its own. It's similar in size to an arcade button (and will fit in holes drilled for 'standard' 30mm buttons) but has a built in LED that can be controlled separately from the switch action - either to indicate or just to look good. The body is a black plastic,...

$3.95

In stock

Angled shot of 10 12mm square tactile switch buttons.

Tactile Switch Buttons (12mm square, 6mm tall) x 10 pack

Product ID: 1119

Medium-sized clicky momentary switches are standard input "buttons" on electronic projects. These work best in a PCB but can be used on a solderless breadboard as shown in this tutorial. The pins are normally open (disconnected) and when the button is pressed they are momentarily closed. They come in a pack of 10, they're pretty handy so you'll want to keep them...

$2.50

In stock

Angled shot of ten 20 cm long quick-connect wire pairs.

Arcade Button Quick-Connect Wire Pairs - 0.11" (10 pack)

Product ID: 1152

Quick connector wire sets will make wiring up our arcade-style or metal buttons quicky-quick. Each wire comes as a 'pair' with two 0.11" quick-connects pre-crimped onto 20cm long wires. The wires are then terminated together in a JST 2.5mm/0.1" spaced 2-pin connector (we don't have the exact part number yet for the connector but you can just use 0.1" header) Of...

$4.95

In stock

Angled shot of a translucent red round 30mm arcade button.

Arcade Button - 30mm Translucent Red

Product ID: 473

$5.95

30 in stock

Angled shot of a round 30mm illuminated pushbutton.

LED Illuminated Pushbutton - 30mm Round

Product ID: 492

A button is a button, and a switch is a switch, but this LED illuminated arcade buttons is in a class of its own. Its the same size as a 'standard' 30mm arcade but has a built in LED that can be controlled separately from the switch action - either to indicate or just to look good. The body is a black plastic, and a lamp holder fits inside. These were originally...

$3.95

45 in stock

Angled shot of a translucent blue round 30mm arcade button.

Arcade Button - 30mm Translucent Blue

Product ID: 476

$5.95

61 in stock

head-on shot of illuminated large red arcade button with LED.

Large Arcade Button with LED - 60mm Red

Product ID: 1190

BAM! This 60mm diameter arcade button is large and inviting and ready for all sorts of pressing and pushing. We've seen these on some games of skill in arcades, they're easy to mount on nearly any kind of enclosure. They're not waterproof or weatherproof, so best used indoors. This button has a flat red plastic cover with a black retaining ring around it. There's an...

$5.95

In stock

head-on shot of illuminated large white arcade button with LED.

Large Arcade Button with LED - 60mm White

Product ID: 1192

BAM! This 60mm diameter arcade button is large and inviting and ready for all sorts of pressing and pushing. We've seen these on some games of skill in arcades, they're easy to mount on nearly any kind of enclosure. They're not waterproof or weatherproof, so best used indoors. This button has a flat white plastic cover with a black retaining ring around it. There's...

$5.95

In stock

Head-on shot of illuminated massive white 100mm arcade button.

Massive Arcade Button with LED - 100mm White

Product ID: 1187

$9.95

In stock

Angled shot of a blue round 16mm illuminated pushbutton.

16mm Illuminated Pushbutton - Blue Momentary

Product ID: 1477

A switch is a switch, and an LED is an LED, but this LED illuminated button is a lovely combination of both! It's a medium sized button, large enough to press easily but not too big that it gets in the way of your project panel. It has a built in LED that can be controlled separately from the switch action - either to indicate or just to look good. The body is a...

$1.95

78 in stock

Head-on shot of massive 100mm green arcade button.

Massive Arcade Button with LED - 100mm Green

Product ID: 1188

OMG WATCH OUT! This 100mm diameter arcade button with a 16mm deep plastic base is so massive and inviting it may collapse upon itself and form a black hole from which not even light can escape! Until it does, however, it ready for all sorts of pressing and pushing. Science has shown no one can resist pressing its shiny surface and saying "beep!". We've seen these on...

$9.95

In stock

head-on shot of illuminated large green arcade button with LED.

Large Arcade Button with LED - 60mm Green

Product ID: 1193

BAM! This 60mm diameter arcade button is large and inviting and ready for all sorts of pressing and pushing. We've seen these on some games of skill in arcades, they're easy to mount on nearly any kind of enclosure. They're not waterproof or weatherproof, so best used indoors. This button has a flat green plastic cover with a black retaining ring around it. There's...

$5.95

23 in stock

Angled shot of a translucent green round 30mm arcade button.

Arcade Button - 30mm Translucent Green

Product ID: 475

$5.95

58 in stock

Angled shot of a red 16mm illuminated pushbutton.

16mm Illuminated Pushbutton - Red Momentary

Product ID: 1439

A button is a button, and an LED is a LED, but this LED illuminated button is a lovely combination of both! It's a medium sized button, large enough to press easily but not too big that it gets in the way of your project panel. It has a built in LED that can be controlled separately from the switch action - either to indicate or just to look good. The body is a black...

$1.50

In stock

Head-on shot of illuminated large blue arcade button 60mm

Large Arcade Button with LED - 60mm Blue

Product ID: 1194

BAM! This 60mm diameter arcade button is large and inviting and ready for all sorts of pressing and pushing. We've seen these on some games of skill in arcades, they're easy to mount on nearly any kind of enclosure. They're not waterproof or weatherproof, so best used indoors. This button has a flat blue plastic cover with a black retaining ring around it. There's an...

$5.95

99 in stock

Angled shot of 12mm x 12mm red on-off power button

On-Off Power Button / Pushbutton Toggle Switch

Product ID: 1683

Push once to turn on, push again to turn off! This clicky switch makes a great power switch or mode toggler. We like this switch because it's breadboard friendly and more fun than a power switch. Can reliably handle up to 500mA and up to 50V. This is a really satisfying switch. The leads are not on a perfect 0.1" grid so for use with a breadboard just bend the leads...

$1.95

In stock

Angled shot of a green 16mm illuminated pushbutton.

16mm Illuminated Pushbutton - Green Momentary

Product ID: 1440

$1.50

In stock

Head-on shot of illuminated massive blue 100mm arcade button.

Massive Arcade Button with LED - 100mm Blue

Product ID: 1189

$9.95

In stock

16mm Illuminated Pushbutton - Blue Latching On/Off Switch

Product ID: 1476

$1.95

In stock

Angled shot of 16mm black panel mount pushbutton.

16mm Panel Mount Momentary Pushbutton - Black

Product ID: 1505

OK, this item is pretty simple - it's a panel mount pushbutton. It's not that exciting, no LEDs, no bells & whistles. But we really like it anyways – look at that lovely rounded shape, that elegant bevel. If you're going to go with a momentary pushbutton, let it be this one! The button is a normally-open micro-switch. When pressed, the contacts short closed...

$0.95

In stock

Head-on shot of illuminated massive yellow 100mm arcade button.

Massive Arcade Button with LED - 100mm Yellow

Product ID: 1186

$9.95

In stock

Angled shot of a white round 16mm illuminated pushbutton.

16mm Illuminated Pushbutton - White Latching On/Off Switch

Product ID: 1478

$1.95

67 in stock

head-on shot of illuminated large yellow arcade button with LED.

Large Arcade Button with LED - 60mm Yellow

Product ID: 1191

BAM! This 60mm diameter arcade button is large and inviting and ready for all sorts of pressing and pushing. We've seen these on some games of skill in arcades, they're easy to mount on nearly any kind of enclosure. They're not waterproof or weatherproof, so best used indoors. This button has a flat yellow plastic cover with a black retaining ring around it. There's...

$5.95

86 in stock

Angled shot of 10 6mm tactile switch buttons.

Tactile Switch Buttons (6mm tall) x 10 pack

Product ID: 1490

Super-tall clicky momentary switches are standard input "buttons" on electronic projects. These work best in a PCB but can be used on a solderless breadboard as shown in this tutorial. The pins are normally open (disconnected) and when the button is pressed they are momentarily closed. These are extra tall which are useful when putting your project in an enclosure...

$2.50

In stock

16mm Illuminated Pushbutton - Red Latching On/Off Switch

Product ID: 1442

$1.50

In stock

Angled shot of a green round 16mm illuminated pushbutton.

16mm Illuminated Pushbutton - Green Latching On/Off Switch

Product ID: 1443

$1.50

In stock

Head-on shot of black tactile alternating button with three wire leads.

Tactile Alternating Button w/3 Wire Leads

Product ID: 1685

Push once to turn one side on, push again to turn the other side on! It's basically a push-button toggle switch that connects and disconnects the middle pin from either of the two side switches with every click. This clicky switch makes a great power switch or mode toggler. We like this switch because it's easy to embed in a seam for easily powering up/off multi-wire...

$3.95

30 in stock

Angled shot of 16mm green panel mount pushbutton.

16mm Panel Mount Momentary Pushbutton - Green

Product ID: 1504

$0.95

In stock

Angled shot of 16mm yellow panel mount pushbutton.

16mm Panel Mount Momentary Pushbutton - Yellow

Product ID: 1502

$0.95

In stock

Angled shot of a yellow round 16mm illuminated pushbutton.

16mm Illuminated Pushbutton - Yellow Latching On/Off Switch

Product ID: 1444

$1.50

In stock

Angled shot of 16mm red panel mount pushbutton.

16mm Panel Mount Momentary Pushbutton - Red

Product ID: 1445

$0.95

In stock

Angled shot of 16mm burgundy panel mount pushbutton.

16mm Panel Mount Momentary Pushbutton - Burgundy

Product ID: 1503

$0.95

In stock

On-Off-On-Off Alternating Power Button / Pushbutton 3-Way Toggle

Product ID: 1684

Push once to turn one side on, push again to turn off, push again to turn the other side on, one last push and its off again! It's basically a push-button toggle switch that connects and disconnects the middle pin from either of the two side switches with every click. This clicky switch makes a great power switch or mode toggler. We like this switch because it's...

$1.95

47 in stock

Mini On/Off Push-Button Switch

Product ID: 3870

Push once to turn on, push again to turn off, push again to turn the other side on, one last push and it's off again! It's basically a push-button toggle switch that connects and disconnects. This clicky Mini On/Off Button switch makes a great power switch or mode toggler. They're often referred to as 'flashlight' switches because you see them used in small...

$0.95

In stock

Black Rubber Joystick Nubbin Cap for 5-weay Navigation Joystick

Black Rubber Joystick Nubbin Cap for Navigation Joystick

Product ID: 4697

A new tiny squishy delight! This Black Rubber Joystick Nubbin Cap is the perfect add-on to any of your projects with a 5-way navigation joystick, like our Adafruit Mini Color TFT with Joystick FeatherWing or Adafruit 128x64 OLED Bonnet for Raspberry Pi. Fits perfectly on classic 5-way navigation joysticks like this one. It's solid, sturdy, and presses on firmly. We...

$0.50

In stock

Rugged Metal Pushbutton - 16mm 6V RGB Momentary

Product ID: 3350

By popular demand, we now have these buttons with a full color RGB LED ring light! These chrome-plated metal buttons are rugged, but certainly not lacking in flair. Simply drill a 16mm hole into any material up to 1/4" thick and you can fit these in place – there's even a rubber gasket to keep water out of the enclosure. On the front of the button is a flat...

$10.95

In stock

Angled shot of 10 8mm soft tactile buttons.

Soft Tactile Button (8mm) x 10

Product ID: 3101

Put your project in stealth mode with these silent Soft Tactile Switch Buttons. Tactile switches are standard input "buttons" on electronic projects. These work best in a PCB but can be used on a solderless breadboard as shown in this tutorial. The pins are normally open (disconnected) and when the button is pressed they are momentarily closed. They come in a pack of...

$1.95

In stock

Mini LED Arcade Button - 24mm Translucent Red

Product ID: 3430

A button is a button, and a switch is a switch, but these translucent arcade buttons are in a class of their own. Particularly because they have LEDs built right in! That's right, you'll be button-mashing amidst a wash of beautiful light with these lil' guys. They're the same size as common miniature arcade controls, and require a 24mm diameter hole for mounting....

$2.50

In stock

Arcade Button with LED - 30mm Translucent Green

Product ID: 3487

$2.50

In stock

Arcade Button with LED - 30mm Translucent Blue

Product ID: 3490

$2.50

In stock

Arcade Button with LED - 30mm Translucent Red

Product ID: 3489

$2.50

In stock

Arcade Button with LED - 30mm Translucent Clear

Product ID: 3491

$2.50

In stock

Rugged Metal Pushbutton - 22mm 6V RGB Momentary

Product ID: 3423

By popular demand, we now have rugged metal buttons with a full color RGB LED ring light! These chrome-plated metal buttons are rugged, but certainly not lacking in flair. This is a 22mm Momentary version of the RGB pushbutton. Simply drill a 22mm hole into any material up to 1/4" thick and you can fit these in place – there's even a rubber gasket to keep water...

$16.50

47 in stock

Arcade Button with LED - 30mm Translucent Yellow

Product ID: 3488

$2.50

32 in stock

Angled shot of ten ~8.5" long quick-connect wire pairs in white and blue.

Arcade Button and Switch Quick-Connect Wires - 0.25" (10-pack)

Product ID: 3838

Quick connector wire sets make wiring up our arcade-style or metal buttons quicky-quick. Each wire comes as a 'pair' with two 0.25" quick-connects pre-crimped. The wires are terminated together in a JST 2.5mm 2-pin connector. This connector will fit in 0.1" headers, so it's breadboard compatible or you can stick two wires into the end. Of course, you can chop this...

$4.95

53 in stock

4x4 Matrix Keypad

Product ID: 3844

Punch in your secret key (or Jenny's number) into this numeric matrix keypad. This keypad has 16 buttons, arranged in a telephone-line 4x4 grid. The keys are connected into a matrix, so you only need 8 microcontroller pins (4-columns and 4-rows) to scan through the pad. Check the tutorials tab for links to an Arduino library and example code. We include some header...

$5.95

81 in stock

Mini LED Arcade Button - 24mm Translucent Clear

Product ID: 3429

$2.50

In stock

Angled shot of 20 6mm soft silicone top pushbuttons.

Soft Silicone Top 6mm Push-buttons (20-pack) - Translucent

Product ID: 4183

This product is really annoying to have to write a description for because it's really something you have to touch to understand! Instead of a hard plastic actuator-button, these have a soft molded silicone button top. The underlying switch is still a clicky dome-switch but you have this nice soft grippy button for your fingers. It's incredibly satisfying to press...

$2.50

39 in stock

Angled shot of three black plastic step-switches with red LEDs.

Step Switch with LED - Three Pack of Black with Red LED - PB86

Product ID: 5502

These hinged momentary step switches are evocative of the 16-step sequencer keys on TR-808 sythesizers. Also sometimes used on A/V equipment, they're very tactile with a good clicky feel. And of course, the built in red LED is great for indicating when something is on or off - or as visual feedback when clicked. There's four legs to the switch for mechanical...

$4.50

15 in stock

Mini LED Arcade Button - 24mm Green

Product ID: 3433

$2.50

In stock

ChromaTek 19mm Rugged Momentary Metal Pushbutton with NeoPixel - 19-B-M-F1

Product ID: 5236

By popular demand, we now have rugged metal buttons with a full-color NeoPixel LED ring light! These chrome-plated metal buttons are rugged, but certainly not lacking in flair. This is a 19mm Momentary version of the RGB pushbutton. Simply drill a 19mm hole into any material up to 0.45" thick and you can fit these in place – there's even a rubber gasket to keep...

$19.95

45 in stock

Angled shot of ten 6mm black mini soft touch pushbutton switches.

Mini Soft Touch Push-button Switches (6mm square) x 10 pack

Product ID: 3983

Put your project in stealth mode with these super slim, super tiny, and silent Mini Soft Touch Push-button Switches. They're less 'clicky' than tactile switches, they have a rubbery elastomer that feels good to press. No dangly spider-leg-pins to solder as these buttons are SMD. We see these often in little game arcade pad layouts due to their small size and soft...

$1.95

8 in stock

Angled close-up of round plastic container containing small rainbow tactile buttons separated by color. Half of the plastic tabs on the container are opened.

6mm Rainbow Tactile Button Deluxe Party Tray - 160 Pieces

Product ID: 4184

You know those party platters you see at fancy events, where there's like sliced carrots on one side, and chunks of cheese on another, all divided up lovely? OK this is the exact same thing but for 6mm tactile buttons. You will never feel constrained by button colors again with this button party, lots of colors, in a handy carry case. Little clicky switches are...

$9.95

In stock

Adafruit LED Arcade Button 1x4 - STEMMA QT I2C Breakout - STEMMA QT / Qwiic

Product ID: 5296

The only thing better than a glowy arcade button is, perhaps, FOUR glowing arcade buttons - and that's what the Adafruit LED Arcade Button 1x4 QT I2C Breakout will let you do! This long 3" x 0.8" PCB has 8 x JST XH sockets that will fit our arcade button quick connects. Each XH pair lets you connect one arcade button that has a built in LED illuminator, and makes it...

$9.95

In stock

Mini LED Arcade Button - 24mm Translucent Blue

Product ID: 3432

$2.50

In stock

STEMMA Wired Tactile Push-Buttons connected to a half sized white breadboard

STEMMA Wired Tactile Push-Button Pack - 5 Color Pack

Product ID: 4431

Little clicky switches are standard input "buttons" on electronic projects. These are just like our Colorful Round Tactile Button Switch Assortment, but already assembled onto a PCB - they even have a pull-up resistor installed! The pins are normally open (disconnected) and when the button is pressed they are momentarily closed. Each button comes with a candy-colored...

$7.50

In stock

Arcade Button and Switch Quick-Connect Wires - 0.187" (10-pack)

Product ID: 3835

Quick connector wire sets make wiring up our arcade-style or metal buttons quicky-quick. Each wire comes as a 'pair' with two 0.187" quick-connects pre-crimped. The wires are terminated together in a JST 2.5mm 2-pin connector. This connector will fit in 0.1" headers, so it's breadboard compatible or you can stick two wires into the end. Of course, you can chop this...

$4.95

In stock

Close-up of a mini red illuminated push-button with a red power symbol installed in a half-size breadboard. Also are on the breadboard are two jumper wires and a resistor.

Mini Illuminated Momentary Pushbutton - Red Power Symbol

Product ID: 3104

This Mini Illuminated Momentary Power Button it an adorable breadboard-friendly tactile switch that has a built-in LED. It provides a simple way to add a tactile switch and a colorful universal power symbol to your project. The tact switch is about the same size as 6mm tactile switches and can snap into a breadboard. There are an additional two pins that connect to...

$1.95

In stock

Close-up of a mini illuminated push-button with a blue power symbol installed in a half-size breadboard. Also are on the breadboard are two jumper wires and a resistor.

Mini Illuminated Momentary Pushbutton - Blue Power Symbol

Product ID: 3105

This Mini Illuminated Momentary Power Button is an adorable breadboard-friendly tactile switch that has a built-in LED. It provides a simple way to add a tactile switch and a colorful universal power symbol to your project. The tact switch is about the same size as 6mm tactile switches and can snap into a breadboard. There are an additional two pins that connect to...

$1.95

96 in stock

Angled shot of 10 plastic button caps colored reddish-orange, yellow, white, and black.

Plastic Button Caps For Square Top (10-pack) - 8mm Diameter

Product ID: 4228

These Reese's Piece's lookin' bits fit perfectly on top of tactile buttons with 2.4mm square tops and give a satisfying 8mm diameter surface area for your fingers to press. You get 10 candy-colored round caps. You get two of each color: red, yellow, white, gray, and Adafruit black. Snap these onto a tactile switch body (not included) to customize your PyGamer, or...

$0.95

In stock

Mini LED Arcade Button - 24mm Translucent Yellow

Product ID: 3431

$2.50

76 in stock

Angled shot of a red triangle illuminated LED pushbutton.

LED Illuminated Triangle Pushbutton A.K.A 1960s Sci-Fi Buttons - Red

Product ID: 4186

We've got plenty of round and square buttons, but these LED Illuminated Triangle Pushbuttons are welcome to the party. These make us think of 1960's or 70's Sci-Fi control board buttons. As everyone knows, triangular buttons are the most retro-futuristic of all button shapes. Get 6 of them together for a cool hexagonal arrangement, or just have one triangle at a...

$3.95

In stock

Overhead shot of dozens of different sized and colored packs of tactile switches.

Tactile Switch Assortment - 25 Different Buttons - 10 pcs each - Through Hole and Surface Mount

Product ID: 5493

When designing your next PCB, if you're not sure what sort of tactile switches you can fit, or how they would look, this Tactile Switch Assortment with 25 Different Buttons (10 pcs each type) is incredibly handy! You get just enough that you can prototype and even lose a couple pieces, but not so many that you're drowning in buttons. Also great for repair, if you're...

$19.95

42 in stock

Rugged Metal Pushbutton with Black Finish - 16mm 6V RGB Latching - 16mm Black Latching

Product ID: 4660

By popular demand, we now have latching rugged metal push buttons with a full color RGB LED ring light! These chrome-plated metal buttons are rugged, but certainly not lacking in flair. Simply drill a 16mm hole into any material up to 1/4" thick and you can fit these in place – there's even a rubber gasket to keep water out of the enclosure. On the front of the...

$14.95

34 in stock

Overhead shot of PCB panel contain two rows of five step-switch breakouts.

PB86 Step Switch Breadboard-Friendly Breakout PCB - Pack of 12

Product ID: 5631

A couple of months ago we started carrying packs of colorful step switches reminiscent of the 16-step sequencer keys on TR-808 synthesizers. We gave folks the heads up that the switches are not breadboard or perf-board friendly i.e. would need to either be hand-wired or designed into a PCB. And then we heard LCD Soundsystem is coming back on tour - so we sold our...

$3.95

87 in stock

3-Wire Square Silicone Button Controller

Square Silicone Button PWM Controller - 3 Wire - 3.6V to 12VDC

Product ID: 5436

This Square Silicone Button PWM Controller is a satisfyingly-squishy, easy-to-wire PWM output button controller with three color power-adjustment statuses in red, blue, and green. A simple way to add a three-cycle power/PWM button and a colorful universal power symbol to your project. These were originally designed for controlling heating pad modules in wearable...

$2.50

In stock

Angled shot of ten reverse tactile button switches.

Reverse Mount Tactile Switch Buttons - 6mm square - 10 Pack

Product ID: 5410

Have you ever seen a tactile button do a headstand? This little clicky button is like a circus (circuit circus?) performer, contorting itself so its legs stick up instead of down the way most are. We think these could be used in SMT projects where you want to have a button that comes through a PCB but without the front height. These are unique and we thought some...

$1.25

In stock

Angled shot of three red plastic step-switches with red LEDs.

Step Switch with LED - Three Pack of Red Plastic with Red LED - PB86-A1

Product ID: 5499

$4.50

25 in stock

Angled shot of a blue triangle illuminated LED pushbutton.

LED Illuminated Triangle Pushbutton A.K.A 1960s Sci-Fi Buttons - Blue

Product ID: 4187

$3.95

12 in stock

Angled shot of three gray plastic step switches with LED.

Step Switch with LED - Three Pack of Gray Plastic with Red LED - PB86-A1

Product ID: 5498

These hinged momentary step switches are evocative of the 16-step sequencer keys on TR-808 sythesizers. Also sometimes used on A/V equipment, they're very tactile, with a good clicky feel. And of course, the built in red LED is great for indicating when something is on or off - or as visual feedback when clicked. There's four legs to the switch for mechanical...

$4.50

In stock

Angled closeup of single 6mm metal ball tactile button.

Metal Ball Tactile Button (6mm) x 10 pack

Product ID: 3347

Add some steely elegance to your project with these Metal Ball Tactile Buttons. They've got a nice industrial shine to them along with a light blue underbelly. Not only do they look good, but they're also good if you have an actuator that will be pressing the button at an angle! Little clicky switches are standard input "buttons" on electronic projects. These work...

$5.95

In stock

Rugged Metal On/Off Switch - 22mm 6V RGB On/Off

Product ID: 3424

By popular demand, we now have rugged metal buttons with a full color RGB LED ring light! These chrome-plated metal buttons are rugged, but certainly not lacking in flair. This is a 22mm On/Off version of the RGB pushbutton. Simply drill a 22mm hole into any material up to 1/4" thick and you can fit these in place – there's even a rubber gasket to keep water...

$16.95

In stock

Angled shot of a green triangle illuminated LED pushbutton.

LED Illuminated Triangle Pushbutton A.K.A 1960s Sci-Fi Buttons - Green

Product ID: 4188

$3.95

45 in stock

Angled shot of a yellow triangle illuminated LED pushbutton.

LED Illuminated Triangle Pushbutton A.K.A 1960s Sci-Fi Buttons - Yellow

Product ID: 4189

$3.95

35 in stock

Angled shot of three white plastic step-switches with red LEDs.

Step Switch with LED - Three Pack of White with Red LED - PB86

Product ID: 5519

$4.50

40 in stock

Angled shot of three yellow step-switches with LEDs.

Step Switch with LED - Three Pack of Yellow with Red LED - PB86-A1

Product ID: 5516

$4.50

In stock

Rugged Metal Silver Finish Pushbutton - 16mm 6V RGB Latching - 16mm RGB Latching

Product ID: 4659

$14.95

13 in stock

Angled shot of three blue step-switches with LEDs.

Step Switch with LED - Three Pack of Blue Plastic with Red LED - PB86-A1

Product ID: 5517

$4.50

In stock

Rugged Metal Pushbutton - 19mm 6V RGB Momentary

Product ID: 3425

By popular demand, we now have rugged metal buttons with a full color RGB LED ring light! These chrome-plated metal buttons are rugged, but certainly not lacking in flair. This is a 19mm Momentary version of the RGB pushbutton. Simply drill a 19mm hole into any material up to 0.45" thick and you can fit these in place – there's even a rubber gasket to keep...

$14.95

59 in stock

Angled shot of three green plastic step-switches with red LEDs.

Step Switch with LED - Three Pack of Green with Red LED - PB86

Product ID: 5518

$4.50

In stock

Angled shot of four 35cm long wire pairs.

Pimoroni Picade Wiring Loom - Version 2

Product ID: 4519

This wiring loom from Pimoroni has all the cables and connectors you'll need to connect a joystick, arcade buttons, and illuminated button to Picade X HAT. It's ideal for DIY arcade cabinet builds and retro gaming. The loom consists of four separate sets of wires (26AWG), all 35cm long: 5-pin female connector to 5-pin male Dupont connector 12 x spade connectors...

$7.95

11 in stock

16mm Illuminated Pushbutton - White Momentary

Product ID: 1479

Notify Me

$1.95

Out of stock

Notify Me

Angled shot of a yellow 16mm illuminated pushbutton.

16mm Illuminated Pushbutton - Yellow Momentary

Product ID: 1441

Notify Me

$1.50

Out of stock

Notify Me

Rugged Metal Pushbuttons - Momentary —Various Colors

Product ID: 2093

These chrome-plated metal buttons are tough without sacrificing style. They're momentary push buttons so when you press it the ‘normally-open’ contact shorts to the common contact. When you release it, the contacts open up again. We have blue, green, red, white, and RGB variants. Check out the product pages for more information!

More Info

In stock

More Info

Angled shot of a white triangle illuminated LED pushbutton.

LED Illuminated Triangle Pushbutton A.K.A 1960s Sci-Fi Buttons - White

Product ID: 4190

Notify Me

$3.95

Out of stock

Notify Me

ChromaTek 19mm Rugged Latching Metal Pushbutton with NeoPixel - 19-B-L-F1

Product ID: 5235

By popular demand, we now have rugged metal buttons with a full-color NeoPixel LED ring light! These chrome-plated metal buttons are rugged, but certainly not lacking in flair. This is a 19mm Latching version of the RGB pushbutton. Simply drill a 19mm hole into any material up to 0.45" thick and you can fit these in place – there's even a rubber gasket to keep...

Notify Me

$19.95

Out of stock

Notify Me

Angled shot of five triangle-shaped LED pushbuttons in white, yellow, red, green, and blue.

LED Illuminated Triangle Pushbutton A.K.A 1960s Sci-Fi Buttons - in Various Colors

Product ID: 5179

We've got plenty of round and square buttons, but these LED Illuminated Triangle Pushbuttons are welcome to the party. These make us think of 1960s or 70s Sci-Fi control board buttons. As everyone knows, triangular buttons are the most retro-futuristic of all button shapes. Get 6 of them together for a cool hexagonal arrangement, or just have one triangle at a time....

More Info

In stock

More Info

Rugged Metal Pushbuttons - On/Off — Various Colors

Product ID: 3486

These chrome-plated metal buttons are tough without sacrificing style. They're on/off switch buttons – when you press it the 'normally-open' contact shorts to the common contact and the button stays 'pressed'. When you press it a second time, the button springs open, and the contacts open up again. We have blue, green, red, white, and RGB variants. Check out...

More Info

In stock

More Info

Angled shot of a translucent yellow round 30mm arcade button.

Arcade Button - 30mm Translucent Yellow

Product ID: 474

More Info

Discontinued

More Info

Angled shot of a pink translucent round 30mm arcade button.

Arcade Button - 30mm Translucent Pink

Product ID: 472

More Info

Discontinued

More Info

Rugged Metal On/Off Switch - 19mm 6V RGB On/Off

Product ID: 3426

By popular demand, we now have rugged metal buttons with a full color RGB LED ring light! These chrome-plated metal buttons are rugged, but certainly not lacking in flair. This is a 19mm On/Off version of the RGB pushbutton. Simply drill a 19mm hole into any material up to 0.45" thick and you can fit these in place – there's even a rubber gasket to keep water...

More Info

Discontinued

More Info