Components & Parts / SD Card

Add mega-storage in a jiffy using this 8 GB class 4 micro-SD card. It comes with a SD adapter so you can use it with any of our shields or adapters. Preformatted to FAT so it works out of the box with our projects. Tested and works great with our Wave shield, Data logger shield and GPS shield, and micro-SD adapter as well as any other device in the Adafruit shop that...

Add tons of storage to your next project with this micro SD card socket. We use this part in all our designs and it works great with any microSD ('transflash') of any storage size. It's a surface-mount part and the pins are underneath so it needs a fine tip and paste or thin solder to get in there and solder, not for beginners! It is a push-push type: push the card...

Add speedy mega-storage in a jiffy using this 16 GB Class 10 micro-SD card. It comes with a SD adapter so you can use it with any of our shields or adapters! Preformatted to FAT so it works out of the box with our projects. Works great with any device in the Adafruit shop that uses micro-SD cards. Ideal for use with Raspberry Pi, BeagleBone Black and other...

Add storage in a jiffy using this 64MB microSD card. Preformatted to FAT32, so it works out of the packaging with our projects. Works great with any device in the Adafruit shop that uses microSD cards. Ideal for use with Feathers, data loggers, or small Linux SBCs (not good for Raspberry Pi unless you have some special distro that will fit on such a small card) These...

Add storage in a jiffy using this 512MB microSD card. Preformatted to FAT32, so it works out of the packaging with our projects. Works great with any device in the Adafruit shop that uses microSD cards. Ideal for use with Feathers, data loggers, or small Linux SBCs (not good for Raspberry Pi unless you have some special distro that will fit on such a small card)...

Add storage in a jiffy using this 128MB microSD card. Preformatted to FAT32, so it works out of the packaging with our projects. Works great with any device in the Adafruit shop that uses microSD cards. Ideal for use with Feathers, data loggers, or small Linux SBCs (not good for Raspberry Pi unless you have some special distro that will fit on such a small card)...

Add storage in a jiffy using this 256MB microSD card. Preformatted to FAT32, so it works out of the packaging with our projects. Works great with any device in the Adafruit shop that uses microSD cards. Ideal for use with Feathers, data loggers, or small Linux SBCs (not good for Raspberry Pi unless you have some special distro that will fit on such a small card)...

This short-style white microSD adapter slides in where the SD card goes but is 11mm shorter (excluding the silver lip). This makes it stick out a lot less and makes for a more elegant (and less accident-prone) project. All you have to do is pop in a microSD card for a sleeker look! The outer edge of the SD adapter has a deep groove for a fingernail to pull on for...

This is the cutest little USB C microSD Card Reader/Writer, but don't be fooled by its adorableness! Simply pop the card into the edge and plug it into your computer or device. No drivers are required; it shows up as a standard 'Mass Storage' device under any OS. You can swap cards while the USB port is used. Comes with a handy little chain for extra portability or...

Add mega-storage in a jiffy using this 4 GB micro-SD card. It comes with a SD adapter so you can use it with any of our shields or adapters! Preformatted to FAT so it works out of the box with our projects. Tested and works great with our Wave shield, Data logger shield and GPS shield, and micro-SD adapter as well as any other device in the Adafruit shop that uses...

Adding shortening to a Pi makes it fatter - but this kind of shortening makes your Pi a little slimmer! This short-style blue microSD adapter slides in where the SD card goes but is 9mm shorter. This makes it stick out a lot less and makes for a more elegant (and less accident-prone) Pi. All you have to do is pop in a microSD card for a sleeker machine! The outer...

This is the cutest little microSD card reader/writer - but don't be fooled by its adorableness! It's wicked fast and supports up to 64 GB SDXC cards! Simply slide the card into the edge and plug it into your computer. No drivers are required, it shows up as a standard 'Mass Storage' device under any OS. You can swap cards while the USB port is kept plugged in. Comes...

Adding shortening to a Pi makes it fatter - but this kind of shortening makes your Pi a little slimmer! This green short-style microSD adapter slides in where the SD card goes but is 9mm shorter. This makes it stick out a lot less and makes for a more elegant (and less accident-prone) Pi. All you have to do is pop in a microSD card for a sleeker machine! The outer...

Adding shortening to a Pi makes it fatter - but this kind of shortening makes your Pi a little slimmer! This short-style, pink microSD adapter slides in where the SD card goes but is 9mm shorter. This makes it stick out a lot less and makes for a more elegant (and less accident-prone) Pi. All you have to do is pop in a microSD card for a sleeker machine! The outer...

Add mega-storage in a jiffy using this 8 GB micro-SD card. It comes with a SD adapter so you can use it with any of our shields or adapters! Preformatted to FAT so it works out of the box with our projects. Tested and works great with our Wave shield, Data logger shield and GPS shield, and micro-SD adapter as well as any other device in the Adafruit shop that uses...