Raspberry Pi / Raspberry Pi B+, Pi 2, & Pi 3

Angled shot of a GPIO Ribbon Cable for Raspberry Pi Model.

GPIO Ribbon Cable for Raspberry Pi Model A+/B+/Pi 2/Pi 3/Pi 4/5 - (40 pins)

Product ID: 1988

That new Raspberry Pi® Model B+ computer you just got has a row of 2x20 pin headers soldered on - those are the GPIO (general purpose input/output) pins, and for those of us who like to hack electronics, they are where the real fun is. By programming the Pi, you can twiddle those pins high or low, send and receive I2C and SPI data, and access the 3V and 5V power...

$2.95

In stock

Angled shot of Assembled Pi T-Cobbler Plus next to GPIO ribbon cable

Assembled Pi T-Cobbler Plus - GPIO Breakout - Pi A+, B+, Pi 2/3/4, Zero

Product ID: 2028

This is the assembled version of the Pi T-Cobbler Plus. It only works with the Raspberry Pi Model Zero, A+, B+, Pi 2, Pi 3 & Pi 4! (Any Pi with 2x20 connector) The Raspberry Pi has landed on the Maker World like a 40-GPIO pinned, quad-USB ported, credit card sized bomb of DIY joy. And while you can use most of our great Model B accessories by hooking up our...

$7.95

In stock

GPIO Stacking Header for Pi A+/B+/Pi 2/Pi 3 - Extra-long 2x20 Pins

Product ID: 2223

Connect your own PCB to a Raspberry Pi B+ and stack on top with this normal-height female header with extra long pins. The female header part is about 8.5mm tall, good for small HATs that do not to clear the USB/Ethernet jacks. This header has extra long 10mm pins, compared with our plain version which is the same base height but has 3mm header pins instead. With...

$2.50

In stock

Angled shot of Adafruit DC & Stepper Motor HAT.

Adafruit DC & Stepper Motor HAT for Raspberry Pi - Mini Kit

Product ID: 2348

Let your robotic dreams come true with the new DC+Stepper Motor HAT from Adafruit. This Raspberry Pi add-on is perfect for any motion project as it can drive up to 4 DC or 2 Stepper motors with full PWM speed control. Raspberry Pi and motors are not included. Works with any and all Raspberry Pi computers with 2x20 connection port. Since the Raspberry Pi does not have...

$22.50

In stock

Break-away 0.1" 2x20-pin Strip Dual Male Header

Product ID: 2822

If we could eat headers, we'd have them for breakfast, lunch, and dinner. But we can't :( So we're making the best of it and selling them! This 2x20-pin strip male header is a great way to add pins to 2x20 0.1" holes in a PCB. They're also perfect companion piece to our 2x20-pin right-angle female header.

$0.95

In stock

Adafruit PiRTC - PCF8523 Real Time Clock for Raspberry Pi

Product ID: 3386

This is a great battery-backed real time clock (RTC) that allows your Raspberry Pi project to keep track of time if the power is lost. Perfect for data-logging, clock-building, time-stamping, timers and alarms, etc. Equipped with PCF8523 RTC, it works great with the Raspberry Pi and has native kernel support. Works perfectly with any Raspberry Pi (or similar single...

$7.50

In stock

Top view of Pack of 2 Black Plated Brass M2.5 Standoffs for Pi HATs.

Brass M2.5 Standoffs for Pi HATs - Black Plated - Pack of 2

Product ID: 2336

"These go to eleven." 11 millimeters that is! Our Black Plated M/F Brass Standoffs are engineered specifically to keep your Pi HAT snug on your Pi while also keeping the two boards separated, in particular, the HDMI port. These standoffs can also be screwed into each other allowing stacking multiple HATs on to one Pi! They're the perfect companion for any Pi Hat...

$0.75

In stock

GPIO Header for RaspberryPi A+/B+/Pi 2/Pi 3 - Tall 2x20 Female Header

Product ID: 1992

Connect your own PCB to a Raspberry Pi B+ with this extra-tall female header. The female header part has extra spaces to make it 16.5mm tall: when placed on your Pi, a PCB will clear the Ethernet and USB jacks. This header has 3mm of pins, compared with our stacking version which is the same base height but has 10mm height instead. With 3mm you don't have to cut the...

$2.95

In stock

Side shot GPIO Header for Raspberry Pi A+/B+/Pi 2/Pi 3/Pi 4/Zero

GPIO Header for Raspberry Pi A+/B+/Pi 2/Pi 3/Pi 4/Zero - 2x20 Female Header

Product ID: 2222

Connect your own PCB to a Raspberry Pi with this normal-height female header. The female header part is about 8.5mm tall, good for small HATs that do not to clear the USB/Ethernet jacks. This header has 3mm of pins, compared with our stacking version which is the same base height but has 10mm header pins instead. With 3mm you don't have to cut the really long pins,...

$1.50

In stock

Angled shot of Raspberry Pi 3 - Model B.

Raspberry Pi 3 - Model B - ARMv8 with 1G RAM

Product ID: 3055

Did you really think the Raspberry Pi would stop getting better? At this point, we sound like a broken record, extolling on the new Pi’s myriad improvements like we’re surprised that the folks at the Raspberry Pi Foundation are continuously making their flagship board better. Still, we’ll say it again - the Raspberry Pi team have outdone themselves....

$35.00

2 in stock

Adafruit PiRTC - Precise DS3231 Real Time Clock for Raspberry Pi

Product ID: 4282

This is the best battery-backed real time clock (RTC) you can get that allows your Raspberry Pi project to keep track of time if the power is lost. Perfect for data-logging, clock-building, NTP servers, time-stamping, timers and alarms, etc. Equipped with a genuine DS3231 RTC, it works great with the Raspberry Pi and has native kernel support. The datasheet for the...

$14.95

In stock

SMT GPIO Header for Raspberry Pi HAT - 2x20 Short Female Header

Product ID: 2187

For super-slim SMT designs, this custom-made, 2x20 short SMT female header can be used to plug a Raspberry Pi HAT onto any modern Raspberry Pi computer with 2x20 headers It's harder to use than the Thru-Hole type headers, because you have to do some SMT soldering, but for the slickest, slimmest fit, this header is recommended! Note that because the connectors go out...

$1.95

In stock

Raspberry Pi PoE+ HAT

Product ID: 5058

Power over Ethernet (PoE) can make your project wiring a breeze - instead of needing a wire for power and data, you can use one Ethernet cable for both! Simply attach the standoffs in the four corners of the HAT, then connect to the 40-pin header. Once the HAT is connected, you can power your Pi through the RJ-45 network connector. Compatible with Raspberry Pi 3 B+...

$20.00

In stock

Top view of Brass M2.5 Standoffs for Pi HATs

Brass M2.5 Standoffs 16mm tall - Black Plated - Pack of 2

Product ID: 2337

Finally we get our very own super sweet sixteen... 16 millimeters that is! Our Black Plated M/F Brass 16mm Standoffs are engineered specifically to keep your PiTFT or other Pi accessories with extra tall headers properly secured while also keeping the two boards separated. These standoffs can also be screwed into each other just like the 11mm versions (made for...

$1.25

1 in stock

Stacking Header for Pi A+/B+/Pi 2/Pi 3 - 2x20 Extra Tall Header

Product ID: 1979

Stack multiple plates, breakouts etc onto your Raspberry Pi Model B+ with this custom-made extra-tall and extra-long 2x20 female header. The female header part has extra spaces to make it 23mm tall: when placed on your Pi, a PCB will clear the Ethernet and USB jacks. The stacky pin part is also extra-long, 10mm, so that when a standard 1.5mm thickness PCB is...

$2.95

In stock

Angled shot of Adafruit Perma-Proto HAT for Pi Mini Kit on a Raspberry Pi.

Adafruit Perma-Proto HAT for Pi Mini Kit - No EEPROM

Product ID: 2310

Design your own Pi HAT, attach custom circuitry and otherwise dress your Pi Zero, A+, B+, Pi 2, Pi 3 and Pi 4 (any Pi with a 2x20 connector) with this jaunty prototyping HAT kit. To kick off the Adafruit HAT party, we have this Perma-Proto inspired plug in daughter board. It has a grid of 0.1" prototyping soldering holes for attaching chips, resistors, LED,...

$4.95

In stock

Angled shot of Raspberry Pi camera board case.

Adafruit Raspberry Pi Camera Board Case with 1/4" Tripod Mount

Product ID: 3253

This is a basic, classic Adafruit Raspberry Pi Camera Board Enclosure with a black base and a clear top. The case is as minimal as it gets, coming in just two pieces of polycarbonate that snap snugly together. This case will keep your Pi Camera safe and secure while also looking super sleek. Works with Pi Camera v1 and v2. The enclosure was designed by Mike Doell...

$2.95

In stock

Raspberry Pi Model 3 A+

Product ID: 4027

The Raspberry Pi 3 Model A+ is the latest board for the minimalist Pi fan. Like the Raspberry Pi 3 Model B+, it boasts a 64-bit quad core processor running at 1.4 GHz, dual-band 2.4 GHz and 5 GHz wireless LAN, and Bluetooth 4.3/BLE. This low-cost Pi uses the same processor as the model 3 B+, but does away with the Ethernet jack and three of the USB ports. It's still...

$25.00

In stock

Top view of Adafruit RGB Matrix HAT + RTC assembled onto a Pi and matrix LED panel. The LED panel displays an off-set square rainbow gradient.

Adafruit RGB Matrix HAT + RTC for Raspberry Pi - Mini Kit

Product ID: 2345

You can now create a dazzling display with your Raspberry Pi Model Zero/A+/B+/Pi 2/3/Pi 4 or Pi 5 with the Adafruit RGB Matrix HAT. This HAT plugs into your Pi and makes it super easy to control RGB matrices such as those we stock in the shop and create a colorful scrolling display or mini LED wall with ease. This HAT is our finest to date, full of some really great...

$24.95

In stock

Angled shot of Adafruit Ultimate GPS HAT for Raspberry Pi A+/B+/Pi 2/3/Pi 4

Adafruit Ultimate GPS HAT for Raspberry Pi A+/B+/Pi 2/3/4/Pi 5 - Mini Kit

Product ID: 2324

It's 10 PM, do you know where your Raspberry Pi is? If you had this GPS HAT, you would! This new HAT from Adafruit adds our celebrated Ultimate GPS, so you can add precision time and location to your Raspberry Pi Model Pi 3, Pi Zero, A+, B+, or Pi 2, 3, 4, & 5. Here's the low-down on the GPS module: -165 dBm sensitivity, 10 Hz updates, 99 search channels. GPS +...

$29.95

80 in stock

40 Pin GPIO Extension Cable connecting Raspberry Pi 400 computer to accessory

40 Pin GPIO Extension Cable for any 2x20 Pin Raspberry Pi - 150mm / 6" long

Product ID: 4823

That new Raspberry Pi 400 computer you just got has a row of 2x20 pin headers on the right side - those are the GPIO (general purpose input/output) pins, and for those of us who like to hack electronics, they are where the real fun lies. By programming the Pi, you can twiddle those pins high or low, send and receive I2C and SPI data, and access the 3V and 5V power...

$2.95

In stock

Angled shot of Assembled Pi Cobbler Plus

Assembled Pi Cobbler Plus - Breakout Cable - for Pi B+/A+/Pi 2/Pi 3/Pi 4

Product ID: 2029

The Raspberry Pi B+ / Pi 2 / Pi 3 / Pi 4 has landed on the Maker World like a 40-GPIO pinned, quad-USB ported, credit card sized bomb of DIY joy. And while you can use most of our great Model B accessories by hooking up our downgrade cable, its probably a good time to upgrade your set up and accessorize using all of the Model B+'s / Pi 2's / Pi 3 / Pi 4's 40 pins....

$6.95

In stock

Adafruit 16-Channel PWM / Servo HAT for Raspberry Pi - Mini Kit

Product ID: 2327

The Raspberry Pi is a wonderful little computer, but one thing it isn't very good at is controlling DC Servo Motors - these motors need very specific and repetitive timing pulses to set the position. Instead of asking the Pi Linux kernel to send these signals, pop on this handy HAT! It adds the capability to control 16 Servos with perfect timing. It can also do PWM...

$17.50

12 in stock

0.1" 2x20-pin Strip Right Angle Female Header

Product ID: 2823

If we could eat headers we'd have them for breakfast, lunch, and dinner. But we can't :( So we're making the best of it and selling them! This 2x20-pin strip, right-angle female header is a perfect companion piece to our 2x20-pin Dual Male Header. It's a great way to add right-angle capability to a 2x20 pin circuit board either by attaching the right-angle male...

$1.50

In stock

Adafruit CYBERDECK HAT for Raspberry Pi 400

Product ID: 4863

Cyber-warriors, listen up here! We’ve got with some zero-day unreleased hardware we just dumpster-dived. Now you can crack kodes, and write skripts with style, thanks to the CYBERDECK HAT for Raspberry Pi 400 from Adafruit zaibatsu. This is the same hardware Kevin Mitnick used when he popped Sidewinder! Ok, maybe not, but it will definitely let you create a...

$8.95

In stock

Top view shot of a Adafruit DC & Stepper Motor Bonnet

Adafruit DC & Stepper Motor Bonnet for Raspberry Pi

Product ID: 4280

Let your robotic dreams come true with the new DC+Stepper Motor Bonnet from Adafruit. This Raspberry Pi add-on is perfect for any motion project as it can drive up to 4 DC or 2 Stepper motors with full PWM speed control. We basically took our super-popular DC+Stepper Motor HAT and squeezed it down and made it fully assembled - plug and play ready to go, no soldering...

$22.50

In stock

2x20 pin IDC Box Header - Raspberry Pi A+/B+/Pi 2/Pi 3/Pi 4

Product ID: 1993

This handy 2x20 IDC Box Header is the matching connector for our 40-pin GPIO Cable. By soldering this onto perf board you can run a GPIO cable from your Pi A+/B+/Pi 2/Pi 3 and Pi 4 to the socket. This is the same socket that comes with our Pi Cobbler Plus or Pi T-Cobbler Plus but without the PCBs or anything This socket only works for the Raspberry Pi Model A+/B+/Pi...

$0.75

In stock

GPIO Header for Raspberry Pi HAT - 2x20 Short Female Header

Product ID: 2243

This 'shorty' 2x20 header is great for a slim connection to your Raspberry Pi model A+ or B+, it's basically the through-hole version of the SMT GPIO Header for Raspberry Pi HAT - 2x20 Short Female Header. This header is for super-slim through-hole designs. It's a custom-made, 2x20 short female header that can be used to plug a Raspberry Pi HAT onto a B+, A+, or Pi...

$1.95

14 in stock

Angled shot of assembled orange Pi Model B+ / Pi 2 / Pi 3 Case Base without lid.

Pi Model B+ / Pi 2 / Pi 3 Case Base - Orange

Product ID: 2250

Now that we have The Single Greatest Raspberry Pi Model B+ / Pi 2 Case Ever - we decided to make it even better by adding COLORS!!!!! Mix and match snap-on lids and bases to form your favorite combinations. Buy one base then match different colored lids to your room or outfit. Or buy all of them so that you can adjust your Pi B+'s case based on your mood, your...

$5.00

1 in stock

Raspberry Pi Sense HAT - any Raspberry Pi with 2x20 Connector

Product ID: 2738

Control the same hardware as used in space... build your very own Astro Pi with the new Raspberry Pi Sense HAT! The Raspberry Pi Sense HAT is attached on top of the Raspberry Pi via the 40 GPIO pins to create an ‘Astro Pi’. The Sense HAT has several integrated circuit based sensors can be used for many different types of experiments, applications, and...

$30.00

31 in stock

Angled shot of assembled black Pi Model B+ / Pi 2 / Pi 3 Case Base with a clear lid.

Adafruit Raspberry Pi B+ / Pi 2 / Pi 3 Case - Smoke Base - w/ Clear Top

Product ID: 2258

It took awhile to perfect - but that's okay since we can now safely say that the Adafruit case for Raspberry Pi Model B+ / Pi 2 / Pi 3 is The Single Greatest Raspberry Pi Model B+ Case Ever. This enclosure was designed by Mike Doell - just like our elegant, beautiful, and functional Pi Case for Raspberry Pi Model B. Made of ultra-durable, super-glossy polycarbonate,...

$7.95

In stock

Angled shot of assembled Adafruit Perma-Proto 40-Pin Raspberry Pi Breadboard PCB with a Raspberry Pi 4.

Adafruit Perma-Proto 40-Pin Raspberry Pi Breadboard PCB Kit - with 2x20 Header

Product ID: 4354

We put a PermaProto full-sized proto board in a blender with a Pi Cobbler and out emerged this very tasty confection - the 40-Pin PermaProto for Pi! It has the Cobbler baked right in. Simply solder the 2x20 box header in, and you get all the labeled breakouts with tons of prototyping space, power rails, mounting holes and that gorgeous silk. This version is for...

$7.95

37 in stock

Assembled red acrylic Raspberry Pi case with no lid.

Pi Model B+ / Pi 2 / Pi 3 Case Base - Red

Product ID: 2334

$5.00

94 in stock

Pi-EzConnect Terminal Block Breakout HAT

Product ID: 2711

With the Pi-EzConnect you can connect all sorts of electronics to a single Raspberry Pi with no soldering or breadboarding! This HAT has screw-terminals for each pin on the Pi Header Key features: Solderless or soldered connections for all GPIO’s on a Raspberry Pi. Mini proto area for adding components. Add standard male or female headers for breadboard like...

$19.95

42 in stock

Angled shot of Adafruit GPIO Reference card PCB.

Adafruit GPIO Reference Card for Raspberry Pi Model B+/Pi 2/Pi 3

Product ID: 2263

This board makes connecting wires to the Raspberry Pi GPIO incredibly easy. It's a reference board that makes it really easy to see if you're connecting your wires correctly. We liked the Pi GPIO Reference Board from Low Voltage Labs so much that we worked with them to license their design! We made some changes to the Low Voltage version - including grouping the pins...

$2.50

In stock

Angled shot of assembled and powered on Smarti Pi Touch stand for Raspberry Pi. A finger with a purple manicure is about to press the touchscreen.

SmartiPi Touch 2 - Stand for Raspberry Pi 7" Touchscreen Display - Compatible with Pi 4

Product ID: 4377

Here is an updated, excellently designed stand that provides a sleek and sturdy look for the 7" Touchscreen Display and Raspberry Pi. Say hello to the improved SmartiPi Touch 2 which has a ton of new goodies like Pi 4 compatibility, various front-pieces for adding LEGO brick compatibility, and even a fan and mount! The 7" Display is secured into the case with four...

$29.95

In stock

Adafruit Perma-Proto HAT for Pi Mini Kit - With EEPROM

Product ID: 2314

Design your own Pi HAT, attach custom circuitry and otherwise dress your Raspberry Pi with this jaunty prototyping HAT kit with EEPROM To kick off the Adafruit HAT party, we have this Perma-Proto inspired plug in daughter board. It has a grid of 0.1" prototyping soldering holes for attaching chips, resistors, LED, potentiometers and more. The holes are connected...

$7.50

In stock

Top view of a Qwiic pHAT installed on a Pi 4 connected to a temperature-humidity sensor.

SparkFun Qwiic pHAT v2.0 for Raspberry Pi - STEMMA QT / Qwiic

Product ID: 5142

The SparkFun Qwiic pHAT V2.0 for Raspberry Pi provides you with the quickest and easiest way to enter into SparkFun’s Qwiic or STEMMA QT ecosystem while still using that Raspberry Pi that you’ve come to know and love. The Qwiic pHAT connects the I2C bus (GND, 3.3V, SDA, and SCL) on your Raspberry Pi to an array of Qwiic/QT connectors on the HAT. Since...

$7.95

32 in stock

Angled shot of assembled SmartPi Touch Pro. The touchscreen displays a wallpaper of a European cityscape at sunrise.

Smarti Pi Touch Pro for Raspberry Pi and Official 7" Display

Product ID: 4951

Here is an updated, excellently designed stand that provides a sleek and sturdy look for the 7" Touchscreen Display and Raspberry Pi. Say hello to the improved SmartiPi Touch Pro! The SmartiPi Touch Pro is a case for the Official Raspberry Pi display and Raspberry Pi 2, 3, and 4. Not compatible with the Pi 5. There is also a mounting point below the display for the...

$34.95

43 in stock

Top view shot of a SparkFun Qwiic / STEMMA QT HAT connect to a Raspberry Pi and Pressure Sensor

SparkFun Qwiic / STEMMA QT HAT for Raspberry Pi

Product ID: 4688

The SparkFun Qwiic HAT for Raspberry Pi is the quickest and easiest way to enter SparkFun’s Qwiic / STEMMA QT ecosystem when using that Raspberry Pi that you’ve come to know and love. The Qwiic HAT connects the I2C bus (GND, 3.3V, SDA, and SCL) on your Raspberry Pi to an array of Qwiic connectors on the HAT. Since the Qwiic system allows for...

$7.95

39 in stock

2x17 (34 pin) IDC Box Header - 0.1" / 2.54mm Pitch

Product ID: 5357

This handy double-row, 34-pin 2x17 IDC Box Header is a slightly smaller version of the 2x20 pin IDC Box Header, often used for floppy disk drive interfacing! But could be useful for other things that have a 34-pin IDC connection requirement. One header per order.

$0.95

In stock

Pimoroni Nano HAT Hacker

Product ID: 3577

Pimoroni's Nano HAT Hacker gives you full access to all 40 pins on your Pi, broken out at the top. It's a super-skinny 0.8mm PCB, so you can solder it right onto the pins on your Pi and still have enough height on a standard header to fit a HAT or pHAT on top. This item used to be called the "Pico HAT Hacker", the name is now "Nano" to reduce confusion with the...

$3.95

40 in stock

Stacking Header for Raspberry Pi - 2x13 Extra Tall

Product ID: 1112

Stack multiple plates, breakouts etc onto your Raspberry Pi with this custom-made extra-tall and extra-long 2x13 female header. The female header part has extra spaces to make it 13.6mm tall: when placed on your Pi, a PCB will clear the Ethernet and USB jacks. The stacky pin part is also extra-long, 9.7mm, so that when a standard 1.5mm thickness PCB is installed,...

$1.95

In stock

Raspberry Pi Build HAT - LEGO Robotics Add-On For Raspberry Pi

Product ID: 5287

The Raspberry Pi Build HAT (Hardware Attached on Top) is a new add-on board for your Raspberry Pi. It connects to the 40-pin GPIO header and can be used to control up to four LEGO Technic motors and sensors from the LEGO Education SPIKE Portfolio. The cool design of the Build HAT means that all the components are on the bottom, leaving room on the top of the board...

$25.00

In stock

Pimoroni Raspberry Pi 7" Touchscreen Display Case - Noir

Product ID: 2033

Noir is the new black! With this Noir Raspberry Pi 7" Touchscreen Display Case you can protect your lovely Pi Foundation PiTFT - 7" Touchscreen Display for Raspberry Pi! Three unique layers provide support and protection to the back of the display, leaving your touchscreen entirely unimpeded and all Raspberry Pi ports totally accessible. This case is also constructed...

$14.95

36 in stock

Adafruit Capacitive Touch HAT for Raspberry Pi - Mini Kit - MPR121

Product ID: 2340

This touch-able add on HAT for Raspberry Pi will inspire your next interactive project with 12 capacitive touch sensors. Capacitive touch sensing works by detecting when a person (or animal) has touched one of the sensor electrodes. Capacitive touch sensing used for stuff like touch-reactive tablets and phones, as well as control panels for appliances, which is where...

$14.95

In stock

Adafruit DPI TFT Kippah for Raspberry Pi

Product ID: 2454

A TFT panel connected to a Raspberry Pi without the use of an HDMI decoder? What is this sorcery??? It's the DPI Kippah from Adafruit! This HAT-like* board snaps onto a Raspberry Pi B+, A+, Pi 2, Pi 3 or Zero and with a little software configuration, allows you to have what normally would go out the HDMI port come up on a nice little flat screen. * Its not...

$13.95

In stock

Pimoroni pHAT Stack for Raspberry Pi

Product ID: 3742

We're doffing our Mini Black HAT Hack3r for the evening because it's showtime for Pimoroni's pHAT Stack! This expansive breakout PCB offers 6 sets of 2x20 pin headers - one for connecting to your Pi and the other 5 for a plethora of HATs, pHATs or bonnets. The combinations are endless... It's perfect for your projects, displaying temperatures, times, etc. and becomes...

$16.95

17 in stock

Angled shot of assembled clear Pi Model B+ / Pi 2 / Pi 3 Case Base without a lid.

Pi Model B+ / Pi 2 / Pi 3 Case Base - Clear

Product ID: 2253

Now that we have The Single Greatest Raspberry Pi Model B+ / Pi 2 / Pi 3 Case Ever - we decided to make it even better by adding COLORS!!!!! Mix and match snap-on lids and bases to form your favorite combinations. Buy one base then match different colored lids to your room or outfit. Or buy all of them so that you can adjust your Pi B+'s case based on your mood, your...

$5.00

In stock

Pimoroni Automation HAT for Raspberry Pi

Product ID: 3289

Do you need a solution for home automation, hydroponics, light industrial automation, and other related predicaments? Take control of and monitor your world with Pimoroni's Automation HAT -- an ultimate jack-of-all-trades Raspberry Pi HAT! With relays, analog channels, powered outputs, and buffered inputs (all 24V tolerant), this home monitoring and automation...

$29.95

15 in stock

Angled shot of clear Pi Model B+ / Pi 2 / Pi 3 Case Lid.

Raspberry Pi Model B+ / Pi 2 / Pi 3 Case Lid - Clear

Product ID: 2257

$3.00

In stock

Angled shot of Pimoroni Mini Black HAT Hack3r

Pimoroni Mini Black HAT Hack3r - Fully Assembled

Product ID: 3182

A nifty little breakout from our friends at Pimoroni that lets you access all of the GPIO pins while also running a HAT or pHAT on your Raspberry Pi Model Zero, 5, 4, 3, 2, A+, or B+ (any Pi with a 2x20 connector). The Pimoroni Mini Black HAT Hack3r is ideal for debugging your (p)HAT projects or combining a (p)HAT with other circuits. Features: HAT & pHAT spec...

$14.95

51 in stock

Angled shot of half-assembled black Pi Model B+ / Pi 2 / Pi 3 Case Base.

Pi Model B+ / Pi 2 / Pi 3 Case Base - Smoke Gray

Product ID: 2256

$5.00

In stock

Pimoroni Unicorn HAT HD

Product ID: 3580

Unicorn HAT HD crams 256 RGB LEDs, in a 16x16 = 256 LED matrix, onto a single HAT. High-definition rainbow goodness! You can still use it for all of the same things as the regular Unicorn HAT, but with four times as many pixels it makes much more complex animations possible, including scrolling text, and even low resolution videos. The bundled ninja diffuser makes...

$34.95

31 in stock

Angled shot of blue assembled Pi Model B+ / Pi 2 / Pi 3 case with the lid removed to show a Pi computer.

Pi Model B+ / Pi 2 / Pi 3 Case Base - Blue

Product ID: 2252

Now that we have The Single Greatest Raspberry Pi Model B+ / Pi 2 / 3 Case Ever - we decided to make it even better by adding COLORS!!!!! Mix and match snap-on lids and bases to form your favorite combinations. Buy one base then match different colored lids to your room or outfit. Or buy all of them so that you can adjust your Pi B+'s case based on your mood, your...

$5.00

In stock

Pimoroni Pan-Tilt HAT for Raspberry Pi - without pan-tilt module

Product ID: 3353

The Pan-Tilt HAT from Pimoroni lets you mount and control a pan-tilt module right on top of your Raspberry Pi. The HAT and its on-board microcontroller let you independently drive the two servos (pan and tilt), as well as driving up to 24 regular LED (with PWM control) or NeoPixel RGB (or RGBW) LEDs. There's also a handy slot through which you can route the servo,...

$14.95

25 in stock

Angled shot of Raspberry Pi Model B+ / Pi 2 / Pi 3 Case Lid in Orange.

Raspberry Pi Model B+ / Pi 2 / Pi 3 Case Lid - Orange

Product ID: 2246

$3.00

86 in stock

Angled shot of black rectangular Inventor Hat MINI board.

Pimoroni Inventor HAT Mini for Raspberry Pi - PIM672

Product ID: 5736

A versatile motor, servo, and audio driver HAT for Raspberry Pi. Bring your mechanical inventions, creations, and contraptions to life! Inventor HAT Mini helps transform a Raspberry Pi computer into a robot, prop, kinetic sculpture, creepy automaton, or any other exciting moving thing. Want to drive a couple of fancy motors with encoders (or hook up standard motors...

$29.95

9 in stock

Adafruit DPI TFT Kippah for Raspberry Pi with Touch Support

Product ID: 2453

$19.95

43 in stock

Top down view of 8 Channel LoRa Gateway HAT with LoRa and GPS Antennas.

8 Channel LoRa Gateway HAT with LoRa and GPS Antenna - SX1301 - Pi Not Included

Product ID: 4284

If you're building a Raspberry Pi project and need to send data back-and-forth, the WiFi module built into newer Pi's should be fine for most cases. However, WiFi does not have a long range and also requires both investment (through your ISP) and setup (routers, access points, network security schemes). If you're deploying your project somewhere more remotely,...

$159.95

16 in stock

Angled shot of assembled Adafruit Pi Protector enclosure for Raspberry Pi Model B+ / Pi 2 / Pi 3 B+.

Adafruit Pi Protector for Raspberry Pi Model B+ / Pi 2 / Pi 3 B+

Product ID: 2292

You've seen the A+ pocket protector - cometh the hour for the full-size Pi version. Introducing PaintYourDragon's last-cut showpiece part ii: Adafruit Pi Protector for Raspberry Pi! It's not quite a full case, however it will keep your Pi B+ safe and svelte. Keep your Raspberry Pi computer tidy and safe in this lovely clear acrylic enclosure. We designed this simple...

$7.50

30 in stock

A white manicured hand holds up an assembled Adafruit Small-Size Perma-Proto Raspberry Pi Breadboard PCB.

Adafruit Small-Size Perma-Proto Raspberry Pi Breadboard PCB Kit

Product ID: 1171

We put a PermaProto quarter-sized proto board in a blender with a Pi Cobbler and out emerged this very tasty confection - the PermaProto for Pi! It has the Cobbler baked right in. Simply solder the 2x13 pin header in and you get all the labeled breakouts with tons of prototyping space, power rails, mounting holes and that gorgeous silk. Customers have asked us to...

$7.95

38 in stock

Angled shot of Raspberry Pi Model B+ / Pi 2 / Pi 3 Case Lid in blue.

Raspberry Pi Model B+ / Pi 2 / Pi 3 Case Lid - Blue

Product ID: 2248

$3.00

73 in stock

Downgrade GPIO Ribbon Cable connected to Raspberry Pi.

Downgrade GPIO Ribbon Cable for Pi A+/B+/Pi 2/Pi 3 - 40p to 26p

Product ID: 1986

Oof - you got a Raspberry Pi Model A+ or B+ that you want to have work with some old kit or plate or breakout or something and it uses the classic 26-pinout. Very frustrating, it is...unless you have this ingenious 'downgrade' GPIO cable. It has a 40-pin socket on one end, but only the first 26 pins have a cable and the other end matches any sort of Cobbler or...

$2.95

55 in stock

Assembled red and white Raspberry Pi case.

Pi Foundation Raspberry Pi B+ / Pi 2 / Pi 3 Case

Product ID: 2604

The first 'official' case from the Raspberry Pi Foundation is here in Raspberry Pi's sleek pink and white! While we've had our own set of cases for awhile now, the Pi foundation's first foray into the case world is an impressive, well-designed effort and definitely what we've come to expect from the folks who made the Raspberry Pi. The case comes in five parts so you...

$9.95

In stock

Raspberry Pi Arcade Cabinet Pack

Product ID: 3272

Couldn't get one of those Nintendo Mini Classic consoles? No problem, we've got you covered with this no-solder no-tools required kit! Video games are one of the most popular applications for the Raspberry Pi (and one of the best gifts to get over the holidays). Play NES, Sega, MAME, SNES, Atari and more! Thanks to the easy-to-use Raspberry Pi and some clever...

$59.95

17 in stock

Raspberry Pi Model B+ / Pi 2 / Pi 3 Case Lid - Smoke Gray

Product ID: 2244

$3.00

In stock

Top view of a Pimoroni Rainbow HAT connected to a Raspberry Pi. HAT reads "YARR"

Pimoroni Rainbow HAT for Android Things™ and Raspberry Pi

Product ID: 3354

The Rainbow HAT from Pimoroni has a buffet of sensors, inputs, and displays to explore Android Things™. Use it as a weather station, a clock, a timer or stopwatch, a mood light, or endless other things. Pimoroni collaborated with the Android Things™ team at Google to create this great add-on board that features displays, sensors, sound, and lots of LEDs!...

$24.95

In stock

Raspberry Pi Model B+ / Pi 2 / Pi 3 Case Lid - Red

Product ID: 2335

$3.00

35 in stock

Raspberry Pi Media Center Kit for Raspberry Pi3 - No Pi Included

Product ID: 3114

Have you always wanted to binge-watch Battlestar Galactica on a single-board computer? We have! And that's why we put together this Raspberry Pi Media Center kit for Raspberry Pi Model 3's! Based around the OSMC media center, this kit includes everything you need to get going on building your own Raspberry Pi media center. OSMC is a free and open source media center...

$64.95

13 in stock

Angled shot of large 35mm back cover for SmartiPi touch 2 display.

SmartiPi Touch 2 Back Cover (For SmartiPi 2 Only) - Large 35mm

Product ID: 4378

Need a smart solution for covering the back of your SmartiPi Touch display stand? This simple cover from SmartiPi screws into the back VESA mounts on the SmartiPi Touch with the four included screws. It allows you to protect HAT boards and other electronic components that you might want for your project. It's made of ABS plastic and will have to be cut, drilled, or...

$7.99

4 in stock

Timber Pibow - Enclosure for Raspberry Pi Model B+ Computers

Product ID: 2082

Clad your B+ in elegant wood with this Pibow Enclosure for the Raspberry Pi! The Timber Pibow is a spruce-cut case for your Raspberry Pi computer. It's crafted out of high quality wood with a transparent top and base. It's smooth, slick, and durable and because of its wood finish, matches your kitchen table, hardwood, floors, or plant-lined living room. You simply...

$22.50

57 in stock

Faceplate and Buttons Pack for 2.4" PiTFT HAT - Raspberry Pi A+

Product ID: 2808

Complete your Pi setup with our custom designed faceplate specifically designed to fit your 2.4" PiTFT HAT and Adafruit Pi A+ case base! This Faceplate and Buttons Pack is a simple way to enclose your 2.4" PiTFT and Pi safely and in style. The faceplate replaces the normal 'top' of an Adafruit Pi case, with a sleek black bezel and button pads. This pack works with...

$4.95

In stock

Angled shot of small 15mm back cover for smartipi touch 2 display stand.

SmartiPi Touch 2 Back Cover (For SmartiPi 2 Only) - Small 15mm

Product ID: 4379

Need a smart solution for covering the back of your SmartiPi Touch 2 display stand? This simple cover from SmartPi screws into the back VESA mounts on the SmartiPi Touch 2 with the four included screws. It allows you to protect HAT boards and other electronic components that you might want for your project. It's made of ABS plastic and will have to be cut, drilled,...

$7.99

39 in stock

A collection of electronic parts included in kit.

ARM-based IoT Kit for Cloud IoT Core - No Pi

Product ID: 3593

The Arm-based Internet of Things Pack for Raspberry Pi 3 is another great addition to our family of IoT packs. If you want to start using your Raspberry Pi as an IoT-enabled device, then this kit is for you. You might not know it, but Arm-based chips are everywhere. From mobile devices to supercomputer, from medical instruments to agricultural sensors, and from base...

$74.95

7 in stock

2x20 Socket Riser Header for Raspberry Pi HATs and Bonnets

Product ID: 4079

Give yourself a lift with this 2x20 female socket header that has slightly longer than usual pins. You can plug this into your Raspberry Pi GPIO port and then plug a HAT or Bonnet or Phat on top. Especially useful for Bonnets that have slim headers on the bottom, but you want them to clear some of the components on the Pi, or fit into a case nicer. The header body is...

Notify Me

$1.95

Out of stock

Notify Me

Top down view of a Adafruit PiTFT 2.2" HAT Mini Kit with desktop image on the display.

Adafruit PiTFT 2.2" HAT Mini Kit - 320x240 2.2" TFT - No Touch

Product ID: 2315

The cute PiTFT got even more adorable with this little primary display for Raspberry Pi in HAT form! It features a 2.2" display with 320x240 16-bit color pixels. The HAT uses the high-speed SPI interface on the Pi and can use the mini display as a console, X window port, displaying images or video etc. Best of all, it plugs right in on top of your Model A+ or B+ and...

Notify Me

$24.95

Out of stock

Notify Me

40Pin IDC Breakout Helper Soldered into perma-proto

IDC Breakout Helper - 2x20 (40 pin)

Product ID: 2270

The "poor woman's" Raspberry Pi A+ / B+ / Pi 2 cobbler! This combo of 2x20 pin (0.1 spaced) header and socket is for our popular GPIO Ribbon Cable for Raspberry Pi Model A+/B+/Pi 2 (40 pins). It comes in two parts, a 'pin-through' socket and a male header. The socket straddles the center of a breadboard or Perma-Proto and then header plugs into the top of the socket....

Notify Me

$2.25

Out of stock

Notify Me

Red polished white hand holding a Faceplate and Buttons Pack placed on a Pi.

Faceplate and Buttons Pack for 2.8" PiTFTs - Raspberry Pi B+ / Pi 2

Product ID: 2807

Complete your Pi setup with our custom designed faceplate specifically designed to fit your 2.8" PiTFT and Adafruit Pi B+ / Pi 2 case base! This Faceplate and Buttons Pack is a simple way to enclose your 2.8" PiTFT and Pi safely and in style. The faceplate replaces the normal 'top' of an Adafruit Pi case, with a sleek black bezel and button pads. This pack works with...

Notify Me

$4.95

Out of stock

Notify Me

Raspberry Pi Model B+ 512MB RAM

Product ID: 1914

OMG OMG OMG, did you hear? There's a Raspberry Pi called the Model B+ and check it out...more USB ports, more GPIO, better power supply, four mounting holes, less sticky-out SD card! Yep, that's right, the fantastic engineers at Raspberry Pi HQ have blessed us with a new design. They've taken all the feedback over the last 3 years and rolled out a nice updated Pi...

Notify Me

$29.95

Out of stock

Notify Me

Computer Add-On Pack for Raspberry Pi

Product ID: 2129

Turn your Raspberry Pi into a real computer with this computer add-on pack! Look, we're not advocating that you throw out your Macbook Pro. But we do think it's really cool that, with just a few accessories, you can convert your credit-card sized computer into a grown up pocket computer. We don't include a monitor but do include an HDMI cable so you can connect it to...

Notify Me

$22.95

Out of stock

Notify Me

Black polished white finger touching Adafruit PiTFT 2.4" HAT display in a Adafruit PiTFT 2.4" HAT Mini Kit.

Adafruit PiTFT 2.4" HAT Mini Kit - 320x240 TFT Touchscreen

Product ID: 2455

Is this not the cutest little display for the Raspberry Pi? It features a 2.4" display with 320x240 16-bit color pixels and a resistive touch overlay. The HAT uses the high speed SPI interface on the Pi and can use the mini display as a console, X window port, displaying images or video etc. Best of all it plugs right in on top! It's designed to fit nicely onto the...

Notify Me

$34.95

Out of stock

Notify Me

Raspberry Pi DIY Camera Pack

Product ID: 3275

If the holidays promise anything, it’s almost certainly a deluge of photographs. Instead of taking out your smartphones, why not build your own camera? With one of Adafruit’s best selling screens and an official Raspberry Pi camera, you’ll be ready to set up your very own digital camera in no time at all. You’ll be immortalizing all those...

Notify Me

$89.95

Out of stock

Notify Me

Raspberry Pi 3 - Model B+ - 1.4GHz Cortex-A53 with 1GB RAM

Product ID: 3775

The Raspberry Pi 3 Model B is the most popular Raspberry Pi computer made, and the Pi Foundation knows you can always make a good thing better! And what could make the Pi 3 better? How about a faster processor, 5 GHz WiFi, and updated Ethernet chip with PoE capability? Good guess - that's exactly what they did! The Raspberry Pi 3 Model B+ is the latest product in the...

Notify Me

$35.00

Out of stock

Notify Me

Raspberry Pi 3 Model B Starter Pack

Product ID: 3334

Gotta say - this new Pi 3 is fly. All the cool kids are going to have it - but all the coolest kids are also going to have a big pack of super cool accessories. We've hand chosen these accessories as the perfect accompaniment to your new Raspberry Pi 3 - Model B. It's everything you need to get going with a high quality power supply, Raspbian 8G NOOBs SD card (newly...