DIY USB or HDMI Cable Parts - 10 cm Ribbon Cable
Qty | Discount |
---|---|
1-9 | $1.50 |
10-99 | $1.35 |
100+ | $1.20 |
Description
If you're looking to make a custom cable with any two of our USB or HDMI adapters, then you'll need to have these flex cables handy! Making custom cables has never been easier. Just grab one of these cables, then swap and switch any of the plug or socket adapters on each end using the flex cable clips. There are options a-plenty!
This is the 10 cm (~4 inches) version.
The two required HDMI or USB adapters are not included! Check out all of the options we have in the shop to craft your very own custom cable.
We tested out these DIY cable kits with a Raspberry Pi at 1080P for HDMI, and a laptop plus Circuit Playground Express and they worked great but note that they are not going to be as durable or shielded as ready-made cables.
Technical Details
- Cable Length: 100mm
- Cable Width: 10mm / 0.4"
- Weight: 0.6g
Learn
![](http://cdn-learn.adafruit.com/guides/images/000/001/648/medium640/hero-pc.jpg)
See our Distributors page for a complete list of distributors.