4-pin AT / ATX / IDE Molex to Berg Floppy Drive Power Cable

Product ID: 425
$1.95
Qty Discount
1-9 $1.95
10-99 $1.76
100+ $1.56

Description

For big projects, with big power needs, an AT or ATX power supply is a handy place to grab 5V or 12VDC. Only problem is that these supplies have connectors that only plug into motherboards or hard drives. That's where this cable comes in. It has a matching 4-pin molex connector to the hard drive/CD-ROM power cables that come out of a power supply so you can use this to grab 5V or 12V. Heck, you can even use this cable while your computer is powered, say to decorate your hard drive with LEDs or VFD/LCD displays, etc.

These cables come with a 'Berg Floppy Drive Power' connector on the end (they're adapters) - You can just cut the connector off before using

Note that in some older drives, the 12V supply is 'unstable' unless there's a lot of current draw on the 5V line. In these cases, if you need to use the 12V line without also loading the 5V line, you can solder a 10 ohm 10 Watt power resistor between ground and 5V to load it enough to stabilize the 12V line.

Technical Details

  • 50mm long cables (6")
  • 20AWG stranded core
  • Two black ground wires, one red +5V pin, one yellow +12V pin
  • For use with any computer power supply!

Revision History:

  • As of Sept 28, 2022 - The cable now has 20 AWG wires not 18 AWG.
RoHS 2 2011 65 EU Compliant

Learn

Travel back to the future with this flux capturer
Tile together multiple RGB LED panels to create a giant LED wall!
Make your very own full-color video companion cube