Adafruit LED Arcade Button 1x4 - STEMMA QT I2C Breakout - STEMMA QT / Qwiic
Qty | Discount |
---|---|
1-9 | $9.95 |
10-99 | $8.96 |
100+ | $7.96 |
Description
The only thing better than a glowy arcade button is, perhaps, FOUR glowing arcade buttons - and that's what the Adafruit LED Arcade Button 1x4 QT I2C Breakout will let you do! This long 3" x 0.8" PCB has 8 x JST XH sockets that will fit our arcade button quick connects. Each XH pair lets you connect one arcade button that has a built in LED illuminator, and makes it easy to use with a breadboard/perfboard or with a STEMMA QT (Qwiic) connector for instant I2C connectivity on any platform.
Please note, each order comes with one assembled and programmed PCB but no LED arcade buttons or JST XH quick connect cables. We have a wide range of colors and sizes, so pick your favs to go along, this is just the controller board that plugs into a microcontroller.
A built-in microcontroller is pre-programmed with our seesaw firmware so button presses and LED PWM controlling is done all over I2C. You can even connect multiple board by chaining the I2C and cutting open the I2C address jumpers - with four jumpers you can have up to 16 of these boards on a single I2C bus. We have Arduino and CircuitPython/Python libraries for controlling the Arcade 1x4's so you can use any microcontroller/computer for quick creation of glowy button interfaces, without setting up PWM outputs. We found that many LEDs in buttons really want 5V power to light up, and are dim or dark at 3.3V, so we added a small boost converter to let you light up at 5V even if the microcontroller you are using is 3V power.
You can also fit the breakouts onto a breadboard if you like - with two sets of breakout pads, there's plenty of flexibility for any kind of use. There are two rows of 6-pin contacts on a 0.1" grid on both sides. Solder in both sides for mechanical stability.
Soldering is required to attach the header for breadboard use, if you have STEMMA QT/Qwiic connectors its a simple plug-in to get working. A microcontroller is required to drive this board, it isn't stand-alone. LED arcade buttons and JST XH quick connect cables not included!
Technical Details
Default I2C address 0x3A
Revision History:
- As of December 18, 2023 - We've updated this PCB with Adafruit Pinguin to make a lovely and legible silkscreen - you may get the new PCB or the older version with vector fonts - both are identical other than the fancy silkscreen.
Product Dimensions: 76.3mm x 21.5mm x 13.0mm / 3.0" x 0.8" x 0.5"
Product Weight: 9.6g / 0.3oz
Learn
![](http://cdn-learn.adafruit.com/guides/images/000/003/509/medium640/arcade_controller2.jpg)
-
Digi-Key Electronics
United States -
Kamami
Poland -
The Pi Hut
United Kingdom -
Makersify
United Kingdom -
Mouser Electronics
United States -
Kiwi Electronics
Netherlands
See our Distributors page for a complete list of distributors.