Raspberry Pi / Pimoroni

Pimoroni stands for Pirate, Monkey, Robot, Ninja (Pi-Mo-Ro-Ni) and sounds like the name of an expensive Italian lager. It’s pronounced Pih-mo-row-knee. We carry a number of products from our swashbuckling friends across the pond, including HATs, pHATs, SHIMs, Pi Project Packs, their fabulous Pibow cases and more – all of which are sure to add tons of color and character to your projects!

Hammer Header Male - Solderless Raspberry Pi Connector

Product ID: 3662

If your soldering isn't quite up to scratch, or you just don't own a soldering iron yet, then these nifty hammer headers from Pimoroni might be just what you need. Absolutely no soldering required! All that's needed is a few gentle taps with a hammer and whammo! Your header is securely attached to your Pi Zero, Bonnet, HAT or pHAT. Make sure to carefully read...

$2.25

39 in stock

Pimoroni Pico LiPo Power SHIM for Raspberry Pi Pico and Pico W - PIM557

Product ID: 5612

This SHIM from the Pimoroni Pirates provides a convenient way of powering your Raspberry Pi Pico from a LiPo/LiIon battery. You can recharge the battery easily by providing power to the Pico's USB port, then take your Pico or Pico W project on the go with the battery pack powering your circuitry. Solder this neat little square to the pins on the back of your Pico,...

$8.95

19 in stock

Angled shot of a green rectangular microcontroller, a Raspberry Pi Zero, assembled into a plastic and acrylic header installation jig.

GPIO Male Hammer Header Kit - Solderless Raspberry Pi Connector - Male Header + Installation Jig

Product ID: 5442

If your soldering isn't quite up to scratch, or you just don't own a soldering iron yet, then these nifty hammer headers from Pimoroni might be just what you need. This version includes one piece of male header along with some crafty little retaining nubbins to grip tightly into the holes on the PCB. If you need both male and female headers, check out this version!...

$4.50

8 in stock

Pimoroni Servo 2040 - RP2040 18 Channel Servo Controller - PIM613

Product ID: 5437

Build the hexapod/robot arm/other articulated contraption of your dreams with this all-in-one RP2040 powered servo controller with current measurement, sensor headers, and RGB LEDs. Servo 2040 is a standalone servo controller for making things with lots of moving parts. It has pre-soldered pin headers for plugging in up to 18 servos - enough for the leggiest of...

$29.95

In stock

Pimoroni HyperPixel - 4.0" Hi-Res Display for Raspberry Pi

Product ID: 3578

Pimoroni's HyperPixel features a 4.0" display with 800x480 18-bit color pixels and a capacitive touch overlay, making it more sensitive and responsive than a resistive touch display. The plate uses the high speed DPI interface on the Pi and can use the mini display as a console, X window port, displaying images or video, etc. Best of all, it plugs right in on top -...

$64.95

27 in stock

Hammer Header Female - Solderless Raspberry Pi Connector

Product ID: 3663

If your soldering isn't quite up to scratch, or you just don't own a soldering iron yet, then these nifty hammer headers from Pimoroni might be just what you need. Absolutely no soldering required! All that's needed is a few gentle taps with a hammer and whammo! Your header is securely attached to your Pi Zero or pHAT/bonnet/HAT. Make sure to carefully read...

$3.25

92 in stock

Rainbow Pibow Coupé 4 for Raspberry Pi 4

Product ID: 4318

What's that you say? You just received your new Raspberry Pi 4 in the mail and want to get a new colorful case? Well, you are in luck! We now have this new slim, hackable, and attractive case for your new Raspberry Pi 4! This is the classic Pimoroni rainbow case in a slim fit, so you can fit HATs, pHATs and bonnets on top. Crafted out of five unique layers including...

$11.95

40 in stock

Angled shot of an assembled Pibow Zero W Case on a Raspberry Pi Zero.

Pibow Zero W Case for Raspberry Pi Zero W

Product ID: 3471

Crafted out of four transparent acrylic pieces, the Pibow Zero W Case for Raspberry Pi Zero W protects your Pi while showing it off to the world! Each layer is laser-cut from colorful, lightweight, and high-quality cast acrylic. All of the primary ports and GPIO pins are accessible (it encloses the micro-SD slot). The case is lightweight and ideal for mounting to any...

$5.95

49 in stock

Adjustable Pi Camera Mount

Product ID: 1434

Pimoroni's adjustable Pi Camera mount is a great accessory for Pi shutterbugs. Little screws attach the Pi Camera solidly and the design allows for multiple positions. There's also a 1/4" hole that you can use to attach the camera to a standard camera tripod mount. This mount works with the Pi Camera version 1 (5 MegaPixel) and version 2 (8 MegaPixel) both plain...

$4.95

In stock

Pimoroni Nano HAT Hacker

Product ID: 3577

Pimoroni's Nano HAT Hacker gives you full access to all 40 pins on your Pi, broken out at the top. It's a super-skinny 0.8mm PCB, so you can solder it right onto the pins on your Pi and still have enough height on a standard header to fit a HAT or pHAT on top. This item used to be called the "Pico HAT Hacker", the name is now "Nano" to reduce confusion with the...

$3.95

40 in stock

Pimoroni LiPo SHIM

Product ID: 3196

Having a discrete, slick, and tidy power supply is always tricky when taking a project on the go...but get ready to roam the earth worry free with the tiny little Pimoroni LiPo Shim! It aims to give you the most compact power supply possible for all versions of Raspberry Pi. You can either solder the 0.8mm thick PCB directly to the bottom of your GPIO header for a...

$14.95

37 in stock

Pimoroni Raspberry Pi 7" Touchscreen Display Case - Noir

Product ID: 2033

Noir is the new black! With this Noir Raspberry Pi 7" Touchscreen Display Case you can protect your lovely Pi Foundation PiTFT - 7" Touchscreen Display for Raspberry Pi! Three unique layers provide support and protection to the back of the display, leaving your touchscreen entirely unimpeded and all Raspberry Pi ports totally accessible. This case is also constructed...

$14.95

36 in stock

Pimoroni HyperPixel 4.0 Square - Touch Display for Raspberry Pi - Capacitive Touch - PIM470

Product ID: 4499

It's hip to be square with the Pimoroni's HyperPixel 4.0 Square Display with Capacitive Touch for Raspberry Pi computers. This display has all the great features of their standard HyperPixel 4.0—a crisp, brilliant IPS display, capacitive touchscreen, and high-speed DPI interface—it's just more square! This square version of HyperPixel 4.0 is great for...

$78.95

18 in stock

Pimoroni Blinkt! for Raspberry Pi

Product ID: 3195

Snap the Pimironi Blinkt! on top of a Raspberry Pi Zero, or any Raspberry Pi with a 2x20 connector, for a fun 1x8 RGB LED matrix powered directly from the Pi. The Blinkt! provides a wash or controllable color that is ideal for mood-lighting, 1x8 pixel art, persistence of vision effects, status indications, or just blasting color into your surroundings. Each pixel is...

$5.95

16 in stock

Top-down view of Black/White Pimoroni Inky pHAT.

Pimoroni Inky pHAT - eInk Display - Black/White

Product ID: 3934

Here at Adafruit we never tire of cool, new displays, so these super sweet e-paper displays really caught our eye! Pimoroni's Inky pHat is a petite 212x104 pixel two-color display that looks fantastic and is easy to read even in bright daylight. Broadcast your tweets, the weather, or even graphing data. eInk is great for displays that don't change often, due to the...

$24.95

18 in stock

Pimoroni Inky pHAT for Raspberry Pi - 3 Color eInk Display

Product ID: 3743

Here at Adafruit we never tire of cool, new displays, so these super sweet tri-color e-paper displays really caught our eye! Pimoroni's Inky pHat is a petite 212x104 pixel three-color display that looks fantastic and is easy to read even in bright daylight. Broadcast your tweets, the weather, or even graphing data. eInk is great for displays that don't change often,...

$29.95

46 in stock

Pimoroni HyperPixel - 4.0" Hi-Res Display for Raspberry Pi - Non-Touch

Product ID: 3932

Pimoroni's HyperPixel features a 4.0" display with 800x480 18-bit color pixels. The plate uses the high speed DPI interface on the Pi and can use the mini display as a console, X window port, displaying images or video, etc. Best of all, it plugs right in on top - So easy! The DPI interface is super fast, and has speed-optimizations just like HDMI, but it uses just...

$54.95

45 in stock

Pimoroni OnOff SHIM for Raspberry Pi

Product ID: 3581

Add a tiny yet convenient power switch to your Pi with Pimoroni's On-Off SHIM! Pimoroni's SHIMs (Shove Hardware in the Middle) are a new range of boards designed to be small, affordable, and handy. They're just 0.8mm thick (the bare board, not including mounted components) and designed to be soldered straight onto the GPIO pins of your Pi, if you wish, so that you...

$8.50

6 in stock

Pimoroni pHAT Stack for Raspberry Pi

Product ID: 3742

We're doffing our Mini Black HAT Hack3r for the evening because it's showtime for Pimoroni's pHAT Stack! This expansive breakout PCB offers 6 sets of 2x20 pin headers - one for connecting to your Pi and the other 5 for a plethora of HATs, pHATs or bonnets. The combinations are endless... It's perfect for your projects, displaying temperatures, times, etc. and becomes...

$16.95

17 in stock

Pimoroni Automation HAT for Raspberry Pi

Product ID: 3289

Do you need a solution for home automation, hydroponics, light industrial automation, and other related predicaments? Take control of and monitor your world with Pimoroni's Automation HAT -- an ultimate jack-of-all-trades Raspberry Pi HAT! With relays, analog channels, powered outputs, and buffered inputs (all 24V tolerant), this home monitoring and automation...

$29.95

15 in stock

Top down view of assembled components to a Pimoroni HDMI 8" IPS LCD Screen Kit.

Pimoroni HDMI 8" IPS LCD Screen Kit - 1024x768

Product ID: 4338

Make a gorgeous video set up with this high-resolution 8", IPS, 1024x768, plug-n-play HDMI screen kit with a display driver board that's perfect for building into projects like arcade cabinets. The display's 4:3 aspect ratio makes it a great upgrade for retro gaming builds. Or simply use it as a big ol' dazzling display for your Raspberry Pi, or any computer with...

$99.95

4 in stock

Angled shot of Pimoroni Mini Black HAT Hack3r

Pimoroni Mini Black HAT Hack3r - Fully Assembled

Product ID: 3182

A nifty little breakout from our friends at Pimoroni that lets you access all of the GPIO pins while also running a HAT or pHAT on your Raspberry Pi Model Zero, 5, 4, 3, 2, A+, or B+ (any Pi with a 2x20 connector). The Pimoroni Mini Black HAT Hack3r is ideal for debugging your (p)HAT projects or combining a (p)HAT with other circuits. Features: HAT & pHAT spec...

$14.95

51 in stock

Pimoroni Unicorn HAT HD

Product ID: 3580

Unicorn HAT HD crams 256 RGB LEDs, in a 16x16 = 256 LED matrix, onto a single HAT. High-definition rainbow goodness! You can still use it for all of the same things as the regular Unicorn HAT, but with four times as many pixels it makes much more complex animations possible, including scrolling text, and even low resolution videos. The bundled ninja diffuser makes...

$34.95

31 in stock

Top down view of assembled components to a Pimoroni HDMI 10" IPS LCD Screen Kit.

Pimoroni HDMI 10" IPS LCD Screen Kit - 1024x768

Product ID: 4337

Make a gorgeous video set up with this high-resolution 10", IPS, 1024x768, plug-n-play HDMI screen kit with a display driver board that's perfect for building into projects like arcade cabinets. The display's 4:3 aspect ratio makes it a great upgrade for retro gaming builds. Or simply use it as a big ol' dazzling display for your Raspberry Pi, or any computer with...

$139.95

19 in stock

Pimoroni Pan-Tilt HAT for Raspberry Pi - without pan-tilt module

Product ID: 3353

The Pan-Tilt HAT from Pimoroni lets you mount and control a pan-tilt module right on top of your Raspberry Pi. The HAT and its on-board microcontroller let you independently drive the two servos (pan and tilt), as well as driving up to 24 regular LED (with PWM control) or NeoPixel RGB (or RGBW) LEDs. There's also a handy slot through which you can route the servo,...

$14.95

25 in stock

Pimoroni Pico DV Demo Base - RP2040 DVI Multimedia Board - PIM588

Product ID: 5674

Intrigued by the possibilities of VGA Demo Base but no longer own a D-sub cable? No problem! This board is an all-digital conversion of Raspberry Pi's VGA reference design, great if you want to start hacking on video and/or audio output from a Raspberry Pi Pico and piping it straight into a modern monitor. The folks at Pimoroni been using this board with Wren6991's...

$24.95

32 in stock

Pimoroni Enviro – Indoor Environmental Monitor for RaspPi - PIM486

Product ID: 4455

Monitor your world with Pimoroni's Enviro PHAT for Raspberry Pi! There are a whole bunch of fancy environmental sensors on these boards, and a gorgeous little full-color LCD to display your data. It's the perfect way to get started with citizen science and environmental monitoring - with a great UI and easy-to-use Python code Enviro is designed for indoor monitoring,...

$34.95

19 in stock

Pimoroni Bearables Fox Kit

Product ID: 3744

These sewable badges are unbearrrrrably cute. Bearables is Pimoroni's range of woodland-themed wearable LED badges and sensors. String 'em with conductive thread to bring this DIY-meets-Disney badge to life! This Bearables Fox Kit features twelve colored LEDs (blue, green, yellow, orange, red, pink) with twelve different light patterns. The multi-functional button on...

$17.50

22 in stock

Angled shot of black rectangular Inventor Hat MINI board.

Pimoroni Inventor HAT Mini for Raspberry Pi - PIM672

Product ID: 5736

A versatile motor, servo, and audio driver HAT for Raspberry Pi. Bring your mechanical inventions, creations, and contraptions to life! Inventor HAT Mini helps transform a Raspberry Pi computer into a robot, prop, kinetic sculpture, creepy automaton, or any other exciting moving thing. Want to drive a couple of fancy motors with encoders (or hook up standard motors...

$29.95

9 in stock

Pimoroni Pico VGA Demo Base - RP2040 VGA Multimedia Board - PIM553

Product ID: 5675

Built especially to showcase the low-cost, feature-rich RP2040 chip on the Raspberry Pi Pico, this board has VGA output, an SD card slot, digital I2S audio output, and more! Based on the reference design by Raspberry Pi, our Pimoroni Pico VGA Demo Base is a great way to start experimenting with Raspberry Pi Pico/RP2040. It's the perfect way to demo some of the fun...

$24.95

4 in stock

Pimoroni HyperPixel 4.0 Square - Hi-Res Display for Raspberry Pi - Non-Touch - PIM475

Product ID: 4498

It's hip to be square with the Pimoroni's HyperPixel 4.0 Square Display for Raspberry Pi computers. This display has all the great features of their standard HyperPixel 4.0—a crisp, brilliant IPS display and high-speed DPI interface—it's just more square! This square version of HyperPixel 4.0 is great for custom interfaces and control panels, and works...

$67.50

7 in stock

Angled shot of a Pimoroni Picade Cabinet Kit being played by a set of white hand.

Pimoroni Picade Cabinet Kit - 10" Display - PIM469

Product ID: 4334

The Pimoroni Picade Cabinet is a stylish, retro, and fun arcade cabinet for your Raspberry Pi! The Picade Cabinet comes in kit form for you to build at home. All parts, panels, and components are included - you just need to supply the Raspberry Pi, micro SD card, and power adapter. We recommend using a Raspberry Pi 3 as the extra processing power gives great...

$299.00

20 in stock

Angled shot of Pimoroni Pirate Audio: Headphone Amp for Raspberry Pi connected to a pair of headphones.

Pimoroni Pirate Audio: Headphone Amp for Raspberry Pi - PIM482

Product ID: 4454

Build your own home-brew iPod with Pimoroni's Pirate Audio Headphone Amp! It's an all-in-one solution, with gorgeous album art display, track info, and playback controls, for playing your local audio files (MP3, FLAC, etc) or streaming music from Spotify. The DAC and headphone amp give you crisp digital amplified audio through your wired headphones. Pirate Audio is a...

$24.95

6 in stock

Top view of a Pimoroni Rainbow HAT connected to a Raspberry Pi. HAT reads "YARR"

Pimoroni Rainbow HAT for Android Things™ and Raspberry Pi

Product ID: 3354

The Rainbow HAT from Pimoroni has a buffet of sensors, inputs, and displays to explore Android Things™. Use it as a weather station, a clock, a timer or stopwatch, a mood light, or endless other things. Pimoroni collaborated with the Android Things™ team at Google to create this great add-on board that features displays, sensors, sound, and lots of LEDs!...

$24.95

In stock

Angled shot of four 35cm long wire pairs.

Pimoroni Picade Wiring Loom - Version 2

Product ID: 4519

This wiring loom from Pimoroni has all the cables and connectors you'll need to connect a joystick, arcade buttons, and illuminated button to Picade X HAT. It's ideal for DIY arcade cabinet builds and retro gaming. The loom consists of four separate sets of wires (26AWG), all 35cm long: 5-pin female connector to 5-pin male Dupont connector 12 x spade connectors...

$7.95

11 in stock

Timber Pibow - Enclosure for Raspberry Pi Model B+ Computers

Product ID: 2082

Clad your B+ in elegant wood with this Pibow Enclosure for the Raspberry Pi! The Timber Pibow is a spruce-cut case for your Raspberry Pi computer. It's crafted out of high quality wood with a transparent top and base. It's smooth, slick, and durable and because of its wood finish, matches your kitchen table, hardwood, floors, or plant-lined living room. You simply...

$22.50

57 in stock

GPIO Hammer Header kit - Solderless Raspberry Pi Connectors with installation hardware

GPIO Hammer Headers - Solderless Raspberry Pi Connectors - Male + Female + Installation Jig

Product ID: 3413

If your soldering isn't quite up to scratch, or you just don't own a soldering iron yet, then these nifty hammer headers from Pimoroni might be just what you need. They come in both male and female, and use crafty little retaining nubbins to grip tightly into the holes on the PCB. Absolutely no soldering required! All that's needed is a few gentle taps with a hammer...

Notify Me

$6.50

Out of stock

Notify Me

Pirate Audio: Speaker for Raspberry Pi - Built-in 1W Speaker

Product ID: 4451

Pimoroni's Pirate Audio Speaker is perfect for making a Lilliputian radio, sound effect player, or even as a teeny-weeny games console. The built-in 1W speaker may not be the loudest, but it's great fun for lots of projects. The display and playback squishy buttons let you control your audio or sound effects. Use the Pirate Audio software to play local audio files...

Notify Me

$24.95

Out of stock

Notify Me

Top-down view of Yellow/Black/White Pimoroni Inky pHAT.

Pimoroni Inky pHAT - 3 Color eInk Display - Yellow/Black/White

Product ID: 3933

What's that, you say? Pimoroni has another new super sweet tri-color e-paper display? Oh feast your eyes! This Inky pHat in Yellow/Black/White is a petite 212x104 pixel three-color display that looks fantastic and is easy to read even in bright daylight. Broadcast your tweets, the weather, or even graphing data. eInk is great for displays that don't change often, due...

Notify Me

$26.50

Out of stock

Notify Me

Pimoroni Button SHIM for Raspberry Pi

Product ID: 3582

Pimoroni's Button SHIM gives you five handy, physical buttons and an RGB status LED, and it's HAT and pHAT-compatible! Pimoroni's SHIM-format boards are designed to slip neatly onto your Pi's GPIO pins and still allow you to use HATs and pHATs at the same time. Or solder the included female header onto Button SHIM and use it as a standalone board. The buttons and...

Notify Me

$6.95

Out of stock

Notify Me

Pimoroni Picade Console Controller Kit for Raspberry Pi 4 - PIM488

Product ID: 2707

Power-up your TV with a Pimoroni Picade Console Controller! It's a compact, Raspberry Pi-powered retro games machine with authentic arcade controls that plugs right into your TV, monitor, or other HDMI display. It's a stylish, retro, and fun arcade controller for your Raspberry Pi! Picade Console is fight stick-style arcade console that riffs off the Pimoroni Picade...

Notify Me

$99.95

Out of stock

Notify Me

Pimoroni Pirate Audio: 3.5mm Line-out for Raspberry Pi

Product ID: 4452

Plug Pirate Audio Line-out for Raspberry Pi into your hi-fi amp or powered speakers, then sit back, relax, and soak in the rich, digital audio. It has a high-quality I2S DAC, high-res color display, and squishy playback control buttons. This board is perfect for upgrading an existing hi-fi amp and speakers, or a set of powered monitors, with digital audio from local...

Notify Me

$24.95

Out of stock

Notify Me

Pirate Audio: 3W Stereo Speaker Amp for Raspberry Pi

Product ID: 4453

Bring your speaker set into the 21st century with Pirate Audio 3W Stereo Amp for Raspberry Pi! Get punchy digital audio through the push-fit terminals and control your music with the built-in color LCD and squishy playback control buttons. The push-fit connectors on Pirate Audio 3W Stereo Amp make it super-simple to connect up a set of speakers, whether they're...

Notify Me

$24.95

Out of stock

Notify Me

Pimoroni PicoSystem - RP2040 Handheld Gaming System - PIM559

Product ID: 5289

PicoSystem is a pocket-sized handheld games console, built around Raspberry Pi's RP2040 chip (that's the little fella that's the core of a Raspberry Pi Pico). Build custom games in a cute system featuring a dual core microcontroller that can be programmed even by beginners - with a color screen and full controller setup. This handsome portable is great for folks who...

Notify Me

$79.95

Out of stock

Notify Me

Pimoroni Touch pHAT for Raspberry Pi Zero

Product ID: 3472

The Pimoroni Touch pHAT has six capacitive touch buttons, each with a bright white LED, so you can add a touch interface to your Raspberry Pi. While it is shaped and sized to match a Pi Zero, it works great with any Pi with 2x20 connector. You can even use a dry erase pen to write on the pads to label their function. The pHAT features a CAP1166 capacitive touch and...

$11.50

2 in stock

Angled shot of assembled Modela Ninja pibow enclosure for Raspberry Pi Model A.

Modela Ninja Pibow - Enclosure for Raspberry Pi Model A Computer

Product ID: 1319

The Pibow is a durable and fun case for the Raspberry Pi® computer that is perfectly in touch with the ethos of the Raspberry Pi. The case is crafted out of six layers with a transparent top and base. Each layer is laser cut from high-quality cast acrylic and once stacked they securely contain a Raspberry Pi Model A while leaving the primary ports accessible....

$14.95

4 in stock

Angled shot of Pimoroni HAT Hacker HAT with pre-installed 40 pin male connectors

Pimoroni HAT Hacker HAT - PIM511

Product ID: 4673

For when two (mini) HATs are better than one! A nifty prototyping tool for connecting multiple mini HATs (a.k.a. Bonnets, pHATs, Zero-HATs, etc!) to one Pi. This HAT gives your Pi two sets of GPIO pins - very useful for attaching two mini HATs (or a HAT and a mini HAT) at the same time, great for prototyping, debugging, or for connecting a mini HAT to other...