Arduino

Arduino is the popular open-source electronics prototyping platform based on easy-to-use hardware and software. It's intended for artists, designers, hobbyists, and anyone interested in creating interactive objects or environments and is designed to be as flexible as possible to fit your project's needs.

To round out our Arduino category, we also have a complete line of packs. For beginners, check out the Arduino-compatible Adafruit MetroX Classic Kit - Experimentation Kit for Metro 328 or Arduino-compatible Adafruit Metro 328 Starter Pack. All of these, and more, make Adafruit the best place to shop for all your Arduino & Arduino-compatible needs!

Adafruit Metro 328 Starter Pack

Product ID: 68

Heard about Arduino IDE-compatibles but not sure how to start? The Adafruit Metro is an ATmega328-based (like a lot of our own products) development board. Since it is shaped the same, and code/shield-compatible with the Arduino UNO R3 design, our Adafruit Metro is easy to use and hacker friendly and this is the perfect beginner kit for learning how to use the...

$44.95

24 in stock

Front view shot of Shield stacking headers for Arduino in various sizes.

Shield stacking headers for Arduino (R3 Compatible)

Product ID: 85

“How could something so simple be so useful?” We heard once that in the 4th millennium B.C. some guy asked the person who invented the wheel that question. The person who invented the wheel’s answer, we were told, was something like “well it’s not actually that simple - it required engineering and innovation and this thing called...

$1.95

In stock

Angled shot of half-size solderless breadboard with red and black power lines.

Half Sized Premium Breadboard - 400 Tie Points

Product ID: 64

This is a cute, half-size breadboard with 400 tie points, good for small projects. It's 3.25" x 2.2" / 8.3cm x 5.5cm with a standard double-strip in the middle and two power rails on both sides. You can pull the power rails off easily to make the breadboard as thin as 1.4" (3.5cm). You can also "snap" these breadboards together, either way, to make longer and/or...

$4.95

In stock

Top view of a black power supply with barrel jack.

9 VDC 1000mA regulated switching power adapter - UL listed

Product ID: 63

This is a really nice power supply. It's a switching DC supply so it's small and light and efficient. It is thin so it fits in power strips without blocking other outlets. The output is regulated so you'll get a steady 9V up to 1000mA (1 Amp) of current draw. 5.5mm/2.1mm barrel jack, positive tip. This supply is designed to work anywhere in the world, 100V-240V AC...

$8.95

In stock

Adafruit "Music Maker" MP3 Shield for Arduino w/3W Stereo Amp connected to a set of speakers.

Adafruit "Music Maker" MP3 Shield for Arduino w/3W Stereo Amp - v1.0

Product ID: 1788

Product ID: 2488

This is the Adafruit METRO Arduino-Compatible - with headers. It's a fully assembled and tested microcontroller and physical computing board with through-hole headers attached. If you don't want a Metro with the headers attached for super-slimness, check out our Metro without Headers. The METRO works great with the Arduino IDE, and runs the ATmega328P at 16MHz so it...

$17.50

In stock

Angled shot of a Adafruit PowerBoost 500 Shield.

Adafruit PowerBoost 500 Shield - Rechargeable 5V Power Shield

Product ID: 2078

What's a project if it's trapped on your desk? Now you can take your Arduino anywhere you wish with the PowerBoost shield! This stackable shield goes onto your Arduino and provides a slim rechargeable power pack, with a built in battery charger as well as DC/DC booster. Compatible with Arduino Uno, Duemilanove, Mega, Leonardo and Due - basically any...

$19.95

In stock

Adafruit NeoPixel Shield for Arduino - 40 RGB LED Pixel Matrix

Product ID: 1430

Put on your sunglasses before putting this shield onto your 'duino - 40 eye-blistering RGB LEDs adorn the NeoPixel shield for a blast of configurable color. Arranged in a 5x8 matrix, each pixel is individually addressable. Only one pin (Digital #6) is required to control all the LEDs. You can cut a trace and use nearly any other pin if you need some customization. To...

$27.95

In stock

Top view of Capacitive Touch Shield for Arduino connected to various fruits and objects via alligator clips.

Adafruit 12 x Capacitive Touch Shield for Arduino - MPR121

Product ID: 2024

This touch-able add on shield for Arduinos will inspire your next interactive project with 12 capacitive touch sensors. Capacitive touch sensing works by detecting when a person (or animal) has touched one of the sensor electrodes. Capacitive touch sensing used for stuff like touch-reactive tablets and phones, as well as control panels for appliances, which is where...

$12.50

In stock

Adafruit 1.8" Color TFT Shield w/microSD and Joystick - v 2

Product ID: 802

This lovely little shield is the best way to add a small, colorful and bright display to any project. We took our popular 1.8" TFT breakout board and remixed it into an Arduino shield complete with microSD card slot and a 5-way joystick navigation switch and three selection buttons! Since the display uses only 4 pins to communicate and has its own pixel-addressable...

$34.95

56 in stock

Angled shot of Adafruit "Music Maker" MP3 Shield for Arduino connected to a pair of headphones.

Adafruit "Music Maker" MP3 Shield for Arduino (MP3/Ogg/WAV...)

Product ID: 1790

$29.95

88 in stock

Synthetos gShield (grblShield) V5

Product ID: 1750

Create your very own Arduino-controlled 3-axis CNC machine with the gShield. The gShield for Arduino (formerly known as grblShield) is a complete hardware solution for Dank’s CNC motion control system called grbl. The gShield is compatible with the Uno and other 328p versions of the Arduino development platform. Version 5 is now compatible with running TinyG on...

$63.00

25 in stock

Ethernet Cable - 10 ft long

Product ID: 730

We have so many Internet-connected goodies in the shop, we figured it's time to carry a cable so you can easily connect them up! This cable is 10 feet long, black and has all 8 wires installed. Perfect for use with the BeagleBone, Arduino Uno Ethernet, Arduino Ethernet Shield, NETduino Plus, Patch Shield, PoE Injector cables, IoT Printer pack or any other...

$6.95

47 in stock

TinyG CNC Controller Board v8

Product ID: 1749

The TinyG project is a high performance, USB based CNC 6-axis controller that supports XYZ linear and ABC rotary axes with 4 motor outputs. It is designed for small CNC applications and other applications that require highly controllable motion control. TinyG is meant to be a complete embedded solution for small or medium motor control. Main Features: Full,...

$165.00

39 in stock

Light and temperature data-logger pack

Product ID: 249

Includes! Adafruit data logger shield for Arduino. 8 GB SD card. Photocell. Through-Hole Resistors - 10K ohm 5% 1/4W - Pack of 25. Temperature sensor (-40 degC to 125 degC). 6 x AA battery holder with 2.1mm jack (unassembled). You'll need 6 AA batteries, a CR1220 coin cell, some wire and soldering tools to assemble the project. For more information, including...

$27.50

55 in stock

Hand holding Adafruit TriHand holding small Adafruit Trinket - Mini Microcontrollerket board.

Adafruit Trinket - Mini Microcontroller - 5V Logic

Product ID: 1501

Deprecation Warning: The Trinket bit-bang USB technique it uses doesn't work as well as it did in 2014, many modern computers won't work well. So while we still carry the Trinket so that people can maintain some older projects, we no longer recommend it. Please check out the Trinket M0. It has built-in USB, more capabilities, and is comparable in price! Trinket may...

$6.95

In stock

Adafruit Pro Trinket - 5V 16MHz

Product ID: 2000

Deprecation Warning: The Pro Trinket bit-bang USB technique it uses doesn't work as well as it did in 2014, many modern computers won't work well. So while we still carry the Pro Trinket so that people can maintain some older projets, we no longer recommend it. Please check out the Metro Mini (ATmega328 @ 5V 16 MHz), ItsyBitsy 32u4 5V 16MHz, ItsyBitsy 32u4 @ 3.3V...

$9.95

In stock

Angled shot of rectangular microcontroller.

Adafruit Feather HUZZAH with ESP8266 - Loose Headers

Product ID: 2821

Feather is the new development board from Adafruit, and like its namesake, it is thin, light, and lets you fly! We designed Feather to be a new standard for portable microcontroller cores. This is the Adafruit Feather HUZZAH ESP8266 - our take on an 'all-in-one' ESP8266 WiFi development board with built-in USB and battery charging. It's an ESP8266 WiFi module with...

$14.95

In stock

Adafruit Non-Latching Mini Relay FeatherWing

Product ID: 2895

A Feather board without ambition is a Feather board without FeatherWings! This is the Non-Latching Mini Relay FeatherWing. It gives you power to control, and control over power. Put simply, you can now turn on and off lamps, fans, solenoids, and other small appliances that run on up to 250VAC or DC power using any Feather board. Using our Feather Stacking Headers or...

$7.95

In stock

DC Motor + Stepper FeatherWing Add-on For All Feather Boards

Product ID: 2927

A Feather board without ambition is a Feather board without FeatherWings! This is the DC Motor + Stepper FeatherWing which will let you use 2 x bi-polar stepper motors or 4 x brushed DC motors (or 1 stepper and 2 DC motors). Using our Feather Stacking Headers or Feather Female Headers you can connect a FeatherWing on top or bottom of your Feather board and let the...

$19.95

65 in stock

Short Feather Male Headers - 12-pin and 16-pin Male Header Set

Product ID: 3002

These two Short Male Headers alone are, well, lonely. But pair them with any of our Feather boards and you're in business! These headers are particularly cute and tiny and are designed to match perfectly with our shorty female header kit for Featherwings. Note that you could use normal header with those headers but these are short and dont need clipping. By using...

$0.50

In stock

Adafruit Feather M0 WiFi with uFL - ATSAMD21 + ATWINC1500

Product ID: 3061

Feather is the new development board from Adafruit, and like its namesake it is thin, light, and lets you fly! We designed Feather to be a new standard for portable microcontroller cores. This is the Adafruit Feather M0 WiFi w/ATWINC1500 - our take on an 'all-in-one' Arduino-compatible + high speed, reliable WiFi with built in USB and battery charging. It's an...

$34.95

In stock

Angled shot of a rectangular microcontroller connected to a white breadboard and a lithium battery.

Adafruit Feather 32u4 with RFM69HCW Packet Radio - 433MHz - RadioFruit

Product ID: 3077

This is the Adafruit Feather 32u4 Radio (RFM69HCW) 433MHz. We call these RadioFruits, our take on an microcontroller packet radio transceiver with built in USB and battery charging. Its an Adafruit Feather 32u4 with a 433 MHz radio module cooked in! Great for making wireless networks that can go further than 2.4GHz 802.15.4 and similar, are more flexible than...

$24.95

70 in stock

Adafruit 14-Segment Alphanumeric LED FeatherWing

Product ID: 3089

Display, elegantly, 012345678 or 9! Gaze, hypnotized, at ABCDEFGHIJKLM - well it can display the whole alphabet. You get the point. A Feather board without ambition is a Feather board without FeatherWings! This is the Adafruit 0.56" 4-Digit 14-Segment Display FeatherWing! This 14-segment FeatherWing backpack makes it really easy to add a bright alphanumeric display...

$7.95

7 in stock

Angled shot of a rectangular shaped 7-segment breakout board with an LED matrix soldered on.

Adafruit 0.56" 4-Digit 7-Segment FeatherWing Display - Red

Product ID: 3108

One segment? No way dude! 7-Segments for life! This is the Red Adafruit 0.56" 4-Digit 7-Segment Display w/ FeatherWing Combo Pack! We also have these combo packs in Green, Blue, White, and Yellow! 7-Segment Matrices like these are 'multiplexed' - so to control all the seven-segment LEDs you need 14 pins. That's a lot of pins, and there are driver chips like the...

$9.95

25 in stock

Angled shot of a rectangular shaped Quad Alphanumeric Display breakout board with an LED matrix soldered on.

Adafruit 0.54" Quad Alphanumeric FeatherWing Display - White

Product ID: 3127

Display, elegantly, 012345678 or 9! Gaze, hypnotized, at ABCDEFGHIJKLM - well it can display the whole alphabet. You get the point. This is the White Adafruit 0.54" Dual Alphanumeric Display w/ FeatherWing Combo Pack! We also have these combo packs in Green, Red, Blue, Yellow-Green, and Yellow. This is a nice, bright alphanumeric display that shows letters and...

$13.95

19 in stock

Angled shot of a rectangular shaped LED Matrix FeatherWing Display Kit breakout board with an LED matrix soldered on.

Adafruit 0.8" 8x16 LED Matrix FeatherWing Display Kit - Yellow

Product ID: 3153

You will chirp with delight when you see how easy it is to make your very own 8x16 LED matrix display for any Feather. This kit combines two of our adorable miniature LED matrices with a FeatherWing driver board. At 0.8" square, these little 8x8 matrices have got everything a big LED matrix has, but bite sized! Double them up for 128 total bright yellow LEDs. This is...

$11.95

3 in stock

Wall wart power supply with 2.1mm DC output.

12V DC 1000mA (1A) regulated switching power adapter - UL listed

Product ID: 798

This is a really nice power supply. It's a switching DC supply so it's small and light and efficient. It is thin so it fits in power strips without blocking other outlets. The output is regulated so you'll get a steady 12V up to 1000mA (1 Amp) of current draw. 5.5mm/2.1mm barrel jack, positive tip. This supply is designed to work anywhere in the world, 100V-240V AC...

$8.95

In stock

Adafruit GEMMA v2 - Miniature wearable electronic platform

Product ID: 1222

Deprecation Warning: The Gemma bit-bang USB technique it uses doesn't work as well as it did in 2014, many modern computers won't work well. So while we still carry the Gemma so that people can maintain some older projects, we no longer recommend it. Please check out the Gemma M0. It has built-in USB, more capabilities, and is comparable in price! Love FLORA but want...

$9.95

5 in stock

Adafruit Trinket - Mini Microcontroller - 3.3V Logic - MicroUSB

Product ID: 1500

$6.95

In stock

Angled shot of rectangular microcontroller with a MicroSD card installed.

Adafruit Feather M0 Adalogger

Product ID: 2796

Feather is the new development board from Adafruit, and like its namesake it is thin, light, and lets you fly! We designed Feather to be a new standard for portable microcontroller cores. This is the Adafruit Feather M0 Adalogger - our take on an 'all-in-one' Cortex M0 datalogger (or data-reader) with built in USB and battery charging. Its an Adafruit Feather M0 with...

$19.95

In stock

Angled shot of a Adafruit Non-Latching Mini Relay FeatherWing.

Adafruit Latching Mini Relay FeatherWing

Product ID: 2923

Display, elegantly, 012345678 or 9! Gaze, hypnotized, at ABCDEFGHIJKLM - well it can display the whole alphabet. You get the point. This is the Green Adafruit 0.54" Dual Alphanumeric FeatherWing Display Combo Pack! We also have these combo packs in Blue, Red, White, Yellow-Green, and Yellow. This is a nice, bright alphanumeric display that shows letters and numbers...

$13.95

9 in stock

Adafruit 0.8" 8x16 LED Matrix FeatherWing Display Kit - Green

Product ID: 3151

$14.95

3 in stock

USB cable - USB A to Micro-B - 3 foot long

Product ID: 592

This here is your standard A to micro-B USB cable, for USB 1.1 or 2.0. Perfect for connecting a PC to your Metro, Feather, Raspberry Pi or other dev-board or microcontroller Approximately 3 feet / 1 meter long

$2.95

In stock

Adafruit Pro Trinket - 3V 12MHz

Product ID: 2010

$9.95

48 in stock

Adafruit Feather M0 Basic Proto - ATSAMD21 Cortex M0

Product ID: 2772

Feather is the new development board from Adafruit, and like its namesake it is thin, light, and lets you fly! We designed Feather to be a new standard for portable microcontroller cores. This is the Feather M0 Basic Proto, it has a bunch of prototyping space built right in. We have other boards in the Feather family, check'em out here! At the Feather M0's heart is...

$19.95

In stock

Adafruit Feather 32u4 Bluefruit LE

Product ID: 2829

Feather is the new development board from Adafruit, and like its namesake it is thin, light, and lets you fly! We designed Feather to be a new standard for portable microcontroller cores. This is the Adafruit Feather 32u4 Bluefruit - our take on an 'all-in-one' Arduino-compatible + Bluetooth Low Energy with built in USB and battery charging. Its an Adafruit Feather...

$29.95

In stock

Header Kit for Feather - 12-pin and 16-pin Female Header Set

Product ID: 2886

These two Female Headers alone are, well, lonely. But pair them with any of our Feather boards and you're in business! What do they do? They get soldered on either side of the Feather board. Now you can plug in FeatherWings to add more capability to your portable project. Unlike our Feather Stacking Headers, they aren't designed to 'stack', but they're more compact....

$0.95

In stock

Adafruit FeatherWing OLED - 128x32 OLED Add-on For Feather

Product ID: 2900

Product ID: 3109

One segment? No way dude! 7-Segments for life! This is the White Adafruit 0.56" 4-Digit 7-Segment Display w/ FeatherWing Combo Pack! We also have these combo packs in Green, Red, Blue, and Yellow! 7-Segment Matrices like these are 'multiplexed' - so to control all the seven-segment LEDs you need 14 pins. That's a lot of pins, and there are driver chips like the...

$10.95

20 in stock

Adafruit 0.8" 8x16 LED Matrix FeatherWing Display Kit - Blue

Product ID: 3150

$14.95

4 in stock

Adafruit 0.8" 8x16 LED Matrix FeatherWing Display - Yellow-Green

Product ID: 3154

$11.95

12 in stock

Adafruit Grand Central M4 Express featuring SAMD51 - Without Headers

Product ID: 4084

Are you ready? Really ready? Cause here comes the Adafruit Grand Central featuring the Microchip ATSAMD51. This dev board is so big, it's not named after a Metro train, it's a whole freakin' station! This board is like a freight train, with its 120MHz Cortex M4 with floating point support. Your code will zig and zag and zoom, and with a bunch of extra peripherals for...

$29.95

In stock

Adafruit Metro ESP32-S2

Product ID: 4775

Product ID: 3449

A Feather board without ambition is a Feather board without FeatherWings! This is the DotStar FeatherWing, a 6x12 RGB LED Add-on For All Feather Boards! Using our Feather Stacking Headers or Feather Female Headers you can connect a FeatherWing on top or bottom of your Feather board and make your Feather board strut like a peacock at a rave. Put on your sunglasses...

$29.95

In stock

Product ID: 2601

Our RGB matrices are dazzling, with their hundreds or even thousands of individual RGB LEDs. Compared to NeoPixels, they've got great density, power usage and the price-per-LED can't be beat. But...(isn't there always a but?) You need to use our special library to control them, and they require a bunch of wires to be plugged in. Tougher than a single-wire connection...

$5.95

In stock

Product ID: 4147

Upgrade any Feather board with motion and precision temperature sensing, with this all-in-one sensing FeatherWing. It sports two fantastic sensors from Analog Devices: an ADXL343 triple-axis accelerometer and an ADT7410 precision temperature sensor. Both sensors are connected over the shared I2C bus, so you can use it with any and all Feathers! We also break out the...

$11.95

In stock

Adafruit 15x7 CharliePlex LED Matrix FeatherWing - Cool White

Product ID: 3138

$12.95

45 in stock

Front cover of Python for Microcontrollers book

Python for Microcontrollers: Getting Started with MicroPython

Product ID: 3325

MicroPython is a tiny open-source Python programming language interpreter that runs on microcontroller, originally written by Damien George (http://micropython.org/). With MicroPython you can write clean and simple Python code to control hardware instead of having to use complex low-level languages like C or C++ (what Arduino uses for programming). Its great for...

$19.95

17 in stock

Adafruit Joy FeatherWing for all Feathers

Product ID: 3632

Make a game or robotic controller with this Joy-ful FeatherWing. This FeatherWing has a 2-axis joystick and 5 momentary buttons (4 large and 1 small) so you can turn your feather board into a tiny game controller. This wing communicates with your host microcontroller over I2C so it's easy to use and doesn't take up any of your precious analog or digital pins. There...

$9.95

68 in stock

FTDI Serial TTL-232 USB Type C Cable - 5V Power / 3.3V Logic

Product ID: 4364

$19.95

59 in stock

Adafruit 15x7 CharliePlex LED Matrix FeatherWing - Warm White

Product ID: 3163

$12.95

10 in stock

Adafruit FeatherWing OLED - 128x64 OLED Add-on For Feather - STEMMA QT / Qwiic

Product ID: 4650

A Feather board without ambition is a Feather board without FeatherWings! This is the FeatherWing 128x64 OLED: it adds a gorgeous 128x64 monochrome OLED plus 3 user buttons to any Feather main board. Using our Feather Stacking Headers or Feather Female Headers you can connect a FeatherWing on top of your Feather board and let the board take flight! These displays are...

$14.95

In stock

Trinket M0 dev board with SAMD21 chipset.

Adafruit Trinket M0 - for use with CircuitPython & Arduino IDE

Product ID: 3500

The Adafruit Trinket M0 may be small, but do not be fooled by its size! It's a tiny microcontroller board, built around the Atmel ATSAMD21, a little chip with a lot of power. We wanted to design a microcontroller board that was small enough to fit into any project, and low cost enough to use without hesitation. Perfect for when you don't want to give up your...

$8.95

In stock

Adafruit Feather M0 RFM69HCW Packet Radio - 868 or 915 MHz - RadioFruit

Product ID: 3176

This is the Adafruit Feather M0 RFM69 Packet Radio (868 or 915 MHz). We call these RadioFruits, our take on an microcontroller with a RFM69HCW packet radio transceiver plus built in USB and battery charging. Its an Adafruit Feather M0 with a 900MHz radio module cooked in! Feather is the new development board from Adafruit, and like its namesake it is thin, light, and...

$24.95

21 in stock

Adafruit HUZZAH32 – ESP32 Feather Board

Product ID: 3405

Aww yeah, it's the Feather you have been waiting for! The HUZZAH32 is our ESP32-based Feather, made with the official WROOM32 module. We packed everything you love about Feathers: built in USB-to-Serial converter, automatic bootloader reset, Lithium Ion/Polymer charger, and just about all of the GPIOs brought out so you can use it with any of our Feather Wings. We...

$19.95

In stock

Adafruit Radio FeatherWing - RFM69HCW 900MHz - RadioFruit

Product ID: 3229

Add short-hop wireless to your Feather with these RadioFruit Featherwings. These add-ons for any Feather board will let you integrate packetized radio (with the RFM69 radio) or LoRa radio (with the RFM9x's). These radios are good options for kilometer-range radio, and paired with one of our WiFi, cellular or Bluetooth Feathers, will let you bridge from 433/900 MHz to...

$9.95

56 in stock

Adafruit Quad Side-By-Side FeatherWing Kit with Headers

Product ID: 4254

This is the FeatherWing Quad Side-by-Side - a prototyping add-on and more for all Feather boards. This is similar to our FeatherWing Proto except there are four! The magic of the Quad comes when you want to connect your Feather to three other Feather Wings without needing any stacking headers! The Quad comes with: 1 Quad Side-by-side Wing PCB. 4 sets Feather Female...

$9.95

In stock

Adafruit WINC1500 WiFi Shield with PCB Antenna

Product ID: 3653

Connect your Arduino-compatible to the Internet with this WiFi shield that features the FCC-certified ATWINC1500 module from Atmel. This 802.11bgn-capable WiFi module is the best new thing for networking your devices, with SSL support and rock solid performance - running our adafruit.io MQTT demo for a full weekend straight with no hiccups (it would have run longer...

$24.95

36 in stock

Angel shot Adafruit Feather M0 with RFM95 LoRa Radio - 900MHz

Adafruit Feather M0 with RFM95 LoRa Radio - 900MHz - RadioFruit

Product ID: 3178

Product ID: 3366

Headers are like the duct tape of electronics. They're great for connecting things together, soldering to perf-boards, sockets for wires or break-away header, etc. We go through these guys real fast, and thought that given how handy they are, we'd offer them in a pack of five! Stacking headers are a twist on the standard/common male and female header sets. In this...

$5.95

16 in stock

Adafruit Feather M0 RFM96 LoRa Radio - 433MHz - RadioFruit

Product ID: 3179

Product ID: 5335

Long gone are the days of parallel ports and serial ports. Now the USB port reigns supreme! But USB is hard, and you just want to transfer your every-day serial data from a microcontroller to computer. What now? Enter the Adafruit CP2102N Friend! The CP2102N is very similar to the CP2104. Despite having a name with a lower number, its actually considered the...

$5.95

77 in stock

Adafruit RP2040 Prop-Maker Feather with I2S Audio Amplifier

Product ID: 5768

The Adafruit Feather series gives you lots of options for a small, portable, rechargeable microcontroller board. By picking a feather and stacking on a FeatherWing you can create advanced projects quickly. One popular combo is our Feather M4 or Feather RP2040 with a Prop-Maker FeatherWing on top to create animatronics or props that boot up instantly and can drive...

$19.95

In stock

Adafruit RP2040 CAN Bus Feather - MCP2515 CAN Controller.

Adafruit RP2040 CAN Bus Feather with MCP2515 CAN Controller - STEMMA QT

Product ID: 5709

Product ID: 4950

Get ready for our fastest Metro ever - the NXP iMX RT1011 microcontroller powers this board with a 500 MHz ARM Cortex M7 processor. There's 8 MB of execute-in-place QSPI for firmware + disk storage and 128KB of SRAM in-chip, plus a WiFi co-processor using an on-board ESP32 module. The iMX series of chips is the fastest microcontrollers around, with a Cortex M7...

$29.95

29 in stock

Adafruit RP2040 Feather ThinkInk for 24-pin E-Paper Displays - STEMMA QT

Product ID: 5727

Easy e-paper and RP2040 finally come to your Feather with this Adafruit RP2040 Feather Think Ink that's designed to make it a breeze to add almost any common e-Ink/e-Paper display. Chances are you've seen one of those new-fangled 'e-readers' like the Kindle or Nook. They have gigantic electronic paper 'static' displays - that means the image stays on the display even...

$17.50

85 in stock

Angled shot of a black rectangular microcontroller with GPIO header.

Adafruit Floppy FeatherWing with 34-Pin IDC Connector

Product ID: 5679

Relive the days when storage was counted out in kilo-bytes not giga-bytes, using the Adafruit Floppy FeatherWing on a Feather board - perfect for interfacing with 34-Pin IDC Connector floppy drives that were ubiquitous on PC's. This 'Wing has level shifting and a ready-to-plug connector that works with 3.5" or 5.25" floppy disks for reading or writing! Floppy disks...

$4.95

In stock

Adafruit eInk Feather Friend with 32KB SRAM

Product ID: 4446

Easy e-paper finally comes to your Feather with this Adafruit EInk Feather Friend that's designed to make it a breeze to add an eInk display. Chances are you've seen one of those new-fangled 'e-readers' like the Kindle or Nook. They have gigantic electronic paper 'static' displays - that means the image stays on the display even when power is completely disconnected....

$8.95

48 in stock

FeatherS2 Neo - Blingy RGB ESP32-S2 Feather Development Board - Unexpected Maker

Product ID: 5629

Introducing the FeatherS2 Neo - The full-featured ESP32-S2-based development board in a Feather format from Unexpected Maker. The FeatherS2 Neo is a powerhouse, fully souped up with 4 MB of Flash memory (for firmware and file storage) and 2 MB of QSPI-based external PSRAM so you can have massive storage buffers. The FeatherS2 Neo has onboard LiPo battery charging,...

$24.50

67 in stock

Piunora Pro Carrier for Raspberry Pi 4 Module by Diodes Delight

Product ID: 5404

Piunora by Diode Delights is a compact, easy-to-use development board for electronics prototyping with Linux. It has a familiar form factor, legible pin labels, and a design that’s well suited to space-constrained applications. As a carrier board for the Raspberry Pi Compute Module 4 (CM4), Piunora is essentially a tiny version of the Raspberry Pi 4 Single...

$49.95

72 in stock

Rectangular compute module placed on a bigger microcontroller.

Piunora Lite Carrier for Raspberry Pi 4 Module by Diodes Delight

Product ID: 5403

$39.95

6 in stock

Angled shot of a Adafruit METRO 328 Fully Assembled

Adafruit METRO 328 Fully Assembled - Arduino IDE compatible - ATmega328

Product ID: 50

We sure love the ATmega328 here at Adafruit, and we use them a lot for our own projects. The processor has plenty of GPIO, Analog inputs, hardware UART SPI and I2C, timers and PWM galore - just enough for most simple projects. When we need to go small, we use a Metro Mini or a Trinket M0, but when size isn't as much of a concern, we reach for an Adafruit METRO. New!...

Notify Me

$17.50

Out of stock

Notify Me

Product ID: 716

Notify Me

$23.95

Out of stock

Notify Me

Top down view of Music & sound add-on pack for Arduino.

Music & sound add-on pack for Arduino - v1.1

Product ID: 175

Its a Wave shield party pack! Just add an Arduino to create your own iPod-killer, audio art, sound-effects box... Comes with: Latest Wave shield kit, works with more SD cards and with older NG Arduinos! Unassembled. 8 GB SD card (brand or size may change, but we test one of each kind to verify it works well). Speaker - 3" diameter (77mm), 8 ohm impedence, good...

Notify Me

$29.95

Out of stock

Notify Me

Adafruit I2C Controlled + Keypad Shield Kit for 16x2 LCD

Product ID: 715

This new Adafruit shield makes it easy to use a 16x2 Character LCD. The 16x2 Character LCD is NOT, repeat, NOT, included We really like the range of LCDs we stock in the shop, such as our classic blue & white as well as the fancy RGB negative and RGB positive. Unfortunately, these LCDs do require quite a few digital pins, 6 to control the LCD and then perhaps...

Notify Me

$14.95

Out of stock

Notify Me

Angled shot of Standalone AVR ISP Programmer Shield Kit.

Standalone AVR ISP Programmer Shield Kit - includes blank chip!

Product ID: 462

This shield kit pack will allow you to turn any Arduino into an AVR chip burner! It is specifically designed for people who want to program Atmega328P's to turn them into Arduino bootloader chips using an AVR-ISP sketch, but it can also be used to make a 'standalone' AVR ISP programmer - so that you can program blank chips without a computer! We use this set up in...

Notify Me

$17.50

Out of stock

Notify Me

Prototyping feather wing PCB with loose headers

FeatherWing Proto - Prototyping Add-on For All Feather Boards

Product ID: 2884

A Feather board without ambition is a Feather board without FeatherWings! This is the FeatherWing Proto - a prototyping add-on for all Feather boards. Using our Feather Stacking Headers or Feather Female Headers you can connect a FeatherWing on top or bottom of your Feather board and let the board take flight! This has a duplicate breakout for each pin on a Feather,...

Notify Me

$4.95

Out of stock

Notify Me

Adafruit 15x7 CharliePlex LED Matrix Display FeatherWings

Product ID: 2965

You wont be able to look away from the mesmerizing patterns created by these Adafruit 15x7 CharliePlex LED Matrix Display FeatherWings. These 15x7 LED displays can be paired with with any of our Feather boards for a beautiful, bright grid of 105 charlieplexed LEDs. They even come with a built-in charlieplex driver that is run over I2C. We carry these FeatherWings in...