Mechanical Keyboards

Angled shot of short black microcontroller.

Adafruit KB2040 - RP2040 Kee Boar Driver

Product ID: 5302

A wild Kee Boar appears! It’s a shiny KB2040! An Arduino Pro Micro-shaped board for Keebs with RP2040. (#keeblife 4 evah) A lot of folks like using Adafruit parts for their Keeb builds – but with the ItsyBitsy not being pin-compatible with the Pro Micro pinout, it really wasn't very easy without some sort of adapter plate. Now we’re seeing lots of...

$8.95

In stock

NeoKey Socket Breakout for Mechanical Key Switches with NeoPixel - For MX Compatible Switches

Product ID: 4978

The only thing better than a nice mechanical key, is one that also can glow any color of the rainbow - and that's what the Adafruit NeoKey Breakout will let you do! This little 0.75" x 0.85" PCB can fit one Cherry MX or compatible switch and make it easy to use with a breadboard or perfboard. The breakout has a Kailh socket, which means you can plug in any...

$1.75

69 in stock

NeoKey 1x4 QT I2C - Four Mechanical Key Switches with NeoPixels - STEMMA QT / Qwiic

Product ID: 4980

The only thing better than a nice mechanical key is, perhaps, FOUR mechanical keys that also can glow any color of the rainbow - and that's what the Adafruit NeoKey 1x4 QT I2C Breakout will let you do! This longgg 3" x 0.8" PCB fits four Cherry MX or compatible switches and make it easy to use with a breadboard/perfboard or with a STEMMA QT (Qwiic) connector for...

$9.95

100 in stock

Angled shot of black, credit-card-sized development board.

Adafruit Metro RP2040

Product ID: 5786

Choo! Choo! This is the RP2040 Metro Line, making all station stops at "Dual Cortex M0+ mountain", "264K RAM round-about" and "16 Megabytes of Flash town". This train is piled high with hardware that complements the Raspberry Pi RP2040 chip to make it an excellent development board for projects that want Arduino-shape-compatibility or just need the extra space and...

$14.95

85 in stock

Angled shot of ten white plastic keycaps.

Relegendable Plastic Keycaps for MX Compatible Switches 10 pack

Product ID: 5039

Get ready to customize your keeb with a 10 pack of two-part plastic keycaps for your next mechanical keyboard or NeoKey project. Each keycap comes with a off-white base and a clear cover piece. You can easily remove the clear cover to put a sticker or slip of paper underneath to make a custom keycap label. Snap 'em onto any Cherry MX or compatible switch The keycaps...

$4.95

In stock

Switch Sockets for Kailh CHOC Compatible Keys - 10 Pack

Product ID: 5118

Back in my day, if you wanted to make a mechanical keyboard, you had to solder in expensive key switches onto your PCB - and woe to the person who decided they wanted to change their linear keys instead of clicky ones! Bah humbug, kids these days have no idea, what with their fancy Kailh Choc Switch Sockets - they know nothing of suffering! With these sockets,...

$2.50

In stock

Adafruit NeoKey Trinkey - USB NeoPixel Mechanical Key Switch

Product ID: 5020

It's half USB Key, half Adafruit Trinket, half mechanical keeb...it's NeoKey Trinkey, the circuit board with a Trinket M0 heart, a NeoPixel glow, and a Cherry MX-compatible. We were inspired by single-key macro pads we've seen. So we thought, hey what if we made something like that that plugs right into your computer's USB port, with a fully programmable color...

$6.95

67 in stock

Adafruit MACROPAD RP2040 Bare Bones - 3x4 Keys + Encoder + OLED

Product ID: 5100

Strap yourself in, we're launching in T-minus 10 seconds...Destination? A new Class M planet called MACROPAD! M here, stands for Microcontroller because this 3x4 keyboard controller features the newest technology from the Raspberry Pi sector: say hello to the RP2040. It's a speedy little microcontroller with lots of GPIO pins and 64 times more RAM than the Apollo...

$34.95

10 in stock

Translucent Keycaps for MX Compatible Switches - 10 pack

Product ID: 4956

Get ready to clacky to your heart's content. Here is a 10 pack of translucent keycaps for your next mechanical keyboard or NeoKey project. Snap 'em onto a Cherry MX or compatible switch to turn your Feather or breakout into the lil'est macro keypad. The translucent plastic makes for a glow-friendly switch. Note: This product is just a pack of 10 key caps. Key...

$4.95

In stock

Single shot of 12 pack Blue Kailh Mechanical Key Switches

Kailh Mechanical Key Switch - Clicky Blue - Single Piece

Product ID: 5123

For crafting your very own custom keyboard, a Kailh Blue Linear mechanical key switches is deeee-luxe! With smooth actuation and Cherry MX compatibility, they're lovely when you want a clicky tactile keystroke with a snappy feel and an audible click when pressed. Type: Clicky tactile. Operating force: 50 gf (+/-10 gf). Tactile force: 60 gf (+/-10 gf). Pretravel: 1.8...

$0.95

In stock

Reverse angled shot of single Kailh switch socke.

Kailh Switch Sockets for MX-compatible Mechanical Keys - 20 Pack

Product ID: 4958

Back in my day, if you wanted to make a mechanical keyboard, you had to solder in expensive Cherry MX switches onto your PCB - and woe to the person who decided they wanted to change their linear keys instead of clicky ones! Bah humbug, kids these days have no idea, what with their fancy Kailh Switch Sockets - they know nothing of suffering! With these sockets,...

$4.95

In stock

NeoKey Socket Breakout for CHOC Key Switches with NeoPixel - For CHOC Compatible Switches

Product ID: 5756

The only thing better than a nice mechanical key, is one that also can glow any color of the rainbow - and that's what the Adafruit NeoKey Breakout will let you do! This little 0.75" x 0.95" PCB can fit one Kailh CHOC or compatible switch and make it easy to use with a breadboard or perfboard. The breakout has a Kailh CHOC socket, which means you can plug in any...

$1.75

In stock

Angled shot of ten white Kailh key switches.

Kailh Mechanical Key Switches - Clicky White - 10 pack - Cherry MX White Compatible

Product ID: 4955

For crafting your very own custom keyboard, these Kailh White Linear mechanical key switches are deeee-luxe! With smooth actuation and Cherry MX compatibility, they're lovely when you want a clicky tactile keystroke with a snappy feel and an audible click when pressed. Type: Clicky tactile. Operating force: 50 gf (+/-10 gf). Tactile force: 55 gf (+/-10 gf)....

$6.95

In stock

Adafruit MacroPad RP2040 Enclosure + Hardware Add-on Pack

Product ID: 5103

Dress up your Adafruit Macropad with PaintYourDragon's fabulous decorative silkscreen enclosure and hardware kit. You get the two custom PCBs that are cut to act as a protective bottom plate and and a mechanically-stabilizing keyboard plate. Use the included M3 screws to attach the bottom plate - it's symmetric so you can decide which side you'd like to have visible....

$4.95

In stock

Angled shot of ten brown Kailh key switches.

Kailh Mechanical Key Switches - Tactile Brown - 10 pack - Cherry MX Brown Compatible

Product ID: 4954

For crafting your very own custom keyboard, these Kailh Brown Linear mechanical key switches are deeee-luxe! With smooth actuation and Cherry MX compatibility, they're lovely when you want a tactile keystroke - it's not clicky like the white-stem keys, more like a little 'bump' when pressing. Quiet Tactile / 'Bump' type. Operating force: 50 gf (+/-10 gf). Tactile...

$6.95

In stock

Angled shot of ten red Kailh key switches.

Kailh Mechanical Key Switches - Linear Red - 10 pack - Cherry MX Red Compatible

Product ID: 4952

For crafting your very own custom keyboard, these Kailh Red Linear mechanical key switches are deeee-luxe! With smooth actuation and Cherry MX compatibility, they're lovely when you want a smooth linear keystroke: Type Linear. Operating force: 45 gf (+/-10 gf). Pretravel: 1.8 mm (+/- 0.3 mm). Total travel: 3.6 mm (+/- 0.3 mm). Reset point: 1.8 mm. Comes in a pack of...

$6.95

In stock

Angled shot of twelve black Kailh key switches.

Kailh Mechanical Key Switches - Linear Black - 12 pack - Cherry MX Black Compatible

Product ID: 5876

For crafting your very own custom keyboard, these Kailh Black Linear mechanical key switches are deeee-luxe! With smooth actuation and Cherry MX compatibility, they're lovely when you want a smooth linear keystroke with a slightly higher operating force than the Reds. Type Linear. Operating force: 60 gf (+/-10 gf). Pretravel: 1.8 mm (+/- 0.3 mm). Total travel: 3.6 mm...

$7.95

16 in stock

Top shot of 12 pack Red Kailh Mechanical Key Switches

Kailh Mechanical Key Switches - Linear Red - 12 Pack

Product ID: 5122

$7.95

39 in stock

Group shot of Clear DSA Keycaps for MX Compatible Switches - 12 pack

Clear Keycaps for MX Compatible Switches - 12-pack

Product ID: 5068

Here is a 12 pack of Clear DSA keycaps for your next mechanical keyboard or NeoKey project. Snap 'em onto any Cherry MX or compatible switch to turn your Feather or breakout into the lil'est macro keypad. DSA profile key caps are fully symmetric in all four directions, and are fairly flat so they are great for macro pads. These key caps do not have any markings or...

$6.95

52 in stock

Angled shot of ten white Kailh Choc V1 keycaps.

Kailh CHOC Low Profile White Clicky Key Switches - 10 Pack

Product ID: 5114

For crafting your very own custom keyboard, these Kailh Choc Low Profile Clicky White mechanical key switches are super slim, with ultra-low profile compared to MX compatible switches! Please note these are NOT MX COMPATIBLE! They cannot be used in 'MX' sockets or PCBs or keycaps, the pin arrangement is totally different. That said, they are much lower profile, and...

$11.95

70 in stock

Black Kailh CHOC Slim Key Caps x 10 pack

Product ID: 5111

Dress up your svelte CHOC mechanical keys with these elegant Adafruit Black keycaps. These are thin and flat so they're great for slim Kailh 'Chocolate' key switches. Please note these are NOT MX COMPATIBLE! They cannot be used with 'MX' switches, the mounting nub is totally different. Note: This product is just a pack of 10 keycaps. Key switches are not included! We...

$3.75

In stock

NeoKey 5x6 Ortho Snap-Apart Mechanical Key Switches w/ NeoPixel - For MX Compatible Switches

Product ID: 5157

For folks who want ready-to-go keeb action, we've got the lovely Adafruit Macropad with a 3x4 grid of MX+NeoPixel key switches - but for those who like to forge their own path, we now present the easiest way of creating custom ortholinear (that's a fancy word for gridded) key matrices. Instead of hand soldering together a custom matrix of NeoKey socket breakouts, the...

$29.95

In stock

Angled shot of 10 red Kailh Choc V1 key switches.

Kailh CHOC Low Profile Red Linear Key Switches - 10-pack

Product ID: 5113

For crafting your very own custom keyboard, these Kailh Choc Low Profile Linear Red mechanical key switches are super slim, with ultra-low profile compared to MX compatible switches! Please note these are NOT MX COMPATIBLE! They cannot be used in 'MX' sockets or PCBs or keycaps, the pin arrangement is totally different. That said, they are much lower profile, and...

$11.95

97 in stock

Top view of black fabric sleeve case opened up to reveal half of a red keyboard.

Felt Sleeve Case for Keyboards or Raspberry Pi 400

Product ID: 5293

How many bags and pockets does an OTG (On The Go) maker need to carry their electronics when away from their desk? The world may never know. We get serious satisfaction when things fit into other things, so we fell in love with this soft gray felt sleeve case as it is the exact perfect size for a Raspberry Pi 400! Of course, it can also fit other keyboards that are...

$9.50

In stock

A white hand with pink fingernails above a big blue key switch for scale.

Kailh Big Mechanical Key Switch - Clicky Pale Blue - 1 Piece

Product ID: 5307

The Kailh Big Switch Series comes to Adafruit! These switches are 4 times bigger on each side than a normal MX switch. That comes up to 64 times bigger in volume. Yet, these switches are fully functional. Use as a fidget toy, or solder into a NeoKey trinkey to make the largest Escape key known to humankind. Comes as a large single key switch with keycap. Type:...

$19.95

55 in stock

Kailh CHOC Slim Key Caps - Milky White - 10 pack

Product ID: 5737

Dress up your svelte CHOC mechanical keys with these elegant milky off-white keycaps. These are thin and flat so they're great for slim Kailh 'Chocolate' key switches. Please note these are NOT MX COMPATIBLE! They cannot be used with 'MX' switches, the mounting nub is totally different. Note: This product is just a pack of 10 key caps. Key switches are not included!...

$3.75

85 in stock

Angled shot of ten black Kailh key switches.

Kailh Mechanical Key Switches - Linear Black - 10 pack - Cherry MX Black Compatible

Product ID: 4953

$6.95

In stock

Adafruit NeoKey BFF for Mechanical Key Add-On for QT Py and Xiao - For MX Compatible Switches

Product ID: 5695

Our QT Py boards are a great way to make very small microcontroller projects that pack a ton of power - and now we have a way for you to quickly add a nice mechanical key that also can glow any color of the rainbow. We call this the Adafruit NeoKey BFF - a "Best Friend Forever". When you were a kid you may have learned about the "buddy" system, well this product is...

$2.50

In stock

Angled shot of single black Kailh key switch.

Kailh Mechanical Key Switch - Linear Black - Single Piece

Product ID: 5124

For crafting your very own custom keyboard, a Kailh Black Linear mechanical key switch is deeee-luxe! With smooth actuation and Cherry MX compatibility, they're lovely when you want a linear tactile keystroke with a snappy feel and an audible click when pressed. Type: Clicky tactile. Operating force: 50 gf (+/-10 gf). Tactile force: 60 gf (+/-15 gf). Pretravel: 1.9...

$0.95

In stock

Grouped shot of 10 pack DSA color keycap Translucent Smoke KIT

Translucent Smoke DSA Keycaps for MX Compatible Switches - 10 pack

Product ID: 5008

Dress up your mechanical keys in your favorite colors, with a wide selection of stylish DSA key caps. Here is a 10 pack of translucent smoke black DSA keycaps for your next mechanical keyboard or NeoKey project. Snap 'em onto any Cherry MX or compatible switch to turn your Feather or breakout into the lil'est macro keypad. DSA profile key caps are fully symmetric in...

$5.95

74 in stock

Angled shot of 10 white plastic keycaps.

White DSA Keycaps for MX Compatible Switches - 10 pack

Product ID: 4998

Dress up your mechanical keys in your favorite colors, with a wide selection of stylish DSA key caps. Here is a 10 pack of white DSA keycaps for your next mechanical keyboard or NeoKey project. Snap 'em onto any Cherry MX or compatible switch to turn your Feather or breakout into the lil'est macro keypad. DSA profile key caps are fully symmetric in all four...

$5.95

In stock

Black DSA Keycaps for MX Compatible Switches - 10 pack

Product ID: 4997

Dress up your mechanical keys in your favorite colors, with a wide selection of stylish DSA key caps. Here is a 10 pack of Adafruit black DSA keycaps for your next mechanical keyboard or NeoKey project. Snap 'em onto any Cherry MX or compatible switch to turn your Feather or breakout into the lil'est macro keypad. DSA profile key caps are fully symmetric in all four...

$5.95

45 in stock

Black Relegendable Plastic Keycaps for MX Compatible Switches - 10 pack

Product ID: 5662

Get ready to customize your keeb with a 10-pack of two-part black plastic keycaps for your next mechanical keyboard or NeoKey project. Each keycap comes with a black base and a clear cover piece. You can easily remove the clear cover to put a sticker or slip of paper underneath to make a custom keycap label. Snap 'em onto any Cherry MX or compatible switch The...

$7.50

In stock

Group shot of 10 pack DSA color keycap DARK BLUE KIT

Dark Blue DSA Keycaps for MX Compatible Switches - 10 pack

Product ID: 5016

Dress up your mechanical keys in your favorite colors, with a wide selection of stylish DSA key caps. Here is a 10 pack of dark blue DSA keycaps for your next mechanical keyboard or NeoKey project. Snap 'em onto any Cherry MX or compatible switch to turn your Feather or breakout into the lil'est macro keypad. DSA profile key caps are fully symmetric in all four...

$5.95

In stock

Group shot of 10 pack DSA color keycap RED KIT

Red DSA Keycaps for MX Compatible Switches - 10 pack

Product ID: 5011

Dress up your mechanical keys in your favorite colors, with a wide selection of stylish DSA key caps. Here is a 10 pack of red DSA keycaps for your next mechanical keyboard or NeoKey project. Snap 'em onto any Cherry MX or compatible switch to turn your Feather or breakout into the lil'est macro keypad. DSA profile key caps are fully symmetric in all four directions,...

$5.95

93 in stock

Clear DSA Keycaps for MX Compatible Switches - 10 pack

Product ID: 5013

Get ready to clacky to your heart's content. Here is a 10 pack of clear transparent DSA keycaps for your next mechanical keyboard or NeoKey project. Snap 'em onto any Cherry MX or compatible switch to turn your Feather or breakout into the lil'est macro keypad. DSA profile key caps are fully symmetric in all four directions, and are fairly flat so they are great for...

$5.95

52 in stock

Cherry MX Mechanical 4-Key Tester: Blue Black Red Brown Switches

Product ID: 4974

For crafting your very own custom keyboard, these Cherry MX mechanical key switches are deeee-luxe! This tester gives you one of each, mounted onto a nice plastic cut-out, so you can quickly try all 4. Clicky? Tactile? Linear? What do those terms really mean...you'll know instantly when you poke each key. You get one of each: Clicky Tactile BlueInitial force: 25 gf...

$6.95

99 in stock

Wire Whisk Style Key Cap Remover / Puller

Product ID: 4977

So you've got a slew of fun keycaps for your NeoKey or regular mechanical keypad project. You could manually replace them all one by one. But maybe you've got bigger hands, or you're nervous you might She-Hulk out on your keyboard. This wire-whisk looking tool slips over the keycap and pops it off with ease. Deceptively easy to use. Simply grab the sides of the...

$4.50

22 in stock

Angled shot of ten navy Kailh key switches.

Kailh Mechanical Key Switches - Clicky Navy Blue - 10 pack - Cherry MX Compatible

Product ID: 5150

For crafting your very own custom keyboard, these Kailh Clicky Navy Blue mechanical key switches are deeee-luxe! With smooth actuation and Cherry MX compatibility, they're lovely when you want a 'thick' and satisfying clicky tactile, with high tactile force keystroke with a snappy feel and an audible click when pressed. Type: Clicky Tactile. Operating force: 60...

$9.95

In stock

A white hand with pink fingernails above a big yellow key switch for scale.

Kailh Big Mechanical Key Switch - Linear Dark Yellow - 1 Piece

Product ID: 5305

$19.95

26 in stock

Kailh Mechanical Key Switches - Thick Click Jade Box - 10 pack - Cherry MX Compatible

Product ID: 5149

For crafting your very own custom keyboard, these Kailh Clicky Jade mechanical key switches are deeee-luxe! With smooth actuation and Cherry MX compatibility, they're lovely when you want a 'thick' and satisfying clicky tactile keystroke with a snappy feel and an audible click when pressed. Type: Clicky Tactile. Operating force: 50 ±15gf. Tactile force: 75...

$8.95

In stock

Tumblr Etched R4 Keycap for MX Compatible Switches

Product ID: 5717

Here's a super-classy, custom-made Etched Tumblr Keycap. It's made with translucent/opaque plastic etched to create a dreamy, elegant glow-through effect. Perfect for showing your cultural community posting cred on your next mechanical keyboard project. Snaps onto any Cherry MX or compatible switch. Since the logo is centered, you'll get a glow whether you have north...

$3.95

40 in stock

Angled shot of 10 dark yellow plastic keycaps.

Dark Yellow DSA Keycaps for MX Compatible Switches - 10 pack

Product ID: 5009

Dress up your mechanical keys in your favorite colors, with a wide selection of stylish DSA key caps. Here is a 10 pack of Adafruit dark yellow keycaps for your next mechanical keyboard or NeoKey project. Snap 'em onto any Cherry MX or compatible switch to turn your Feather or breakout into the lil'est macro keypad. DSA profile key caps are fully symmetric in all...

$5.95

In stock

Cyan MA Keycaps for MX Compatible Switches - 5 pack

Product ID: 5174

Dress up your mechanical keys in your favorite colors with a wide selection of gumdrop-like, retro, curvy, and stylish MA profile keycaps. Here is a 5 pack of Cyan MA Keycaps for your next mechanical keyboard or NeoKey project. Snap 'em onto any Cherry MX or compatible switch to turn your Feather or breakout into the lil'est macro keypad. MA profile keycaps are fully...

$4.95

In stock

Kailh Mechanical Four Key Tester: White Black Red Brown Switches

Product ID: 4973

For crafting your very own custom keyboard, these Kailh mechanical key switches are deeee-luxe! This tester gives you one of each, mounted onto a nice plastic cut-out, so you can quickly try all 4. You get one of each: Clicky Tactile WhiteOperating force: 50 gf (+/-10 gf). Tactile force: 55 gf (+/-10 gf). Pretravel: 1.8 mm (+/- 0.3 mm). Pressure point: 1.7 mm. Total...

$6.95

In stock

Black Aluminum Kitty Paw Keycap with Translucent Silicone Toes - MX Compatible Switches

Product ID: 4972

If your kitty's paws are going to walk all over your keyboard, you at least want to be able to walk all over kitty paws. Get ready to clacky to your heart's content with an adorable Black Aluminum Kitty Paw Keycap with Translucent Silicone Toe Beans for your next mechanical keyboard or NeoKey project. Snap 'em onto a Cherry MX or compatible switch to turn your...

$16.50

In stock

Grouped shot of 10 pack DSA color keycap ORANGE KIT

Orange DSA Keycaps for MX Compatible Switches - 10 pack

Product ID: 5010

Dress up your mechanical keys in your favorite colors, with a wide selection of stylish DSA key caps. Here is a 10 pack of orange DSA keycaps for your next mechanical keyboard or NeoKey project. Snap 'em onto any Cherry MX or compatible switch to turn your Feather or breakout into the lil'est macro keypad. DSA profile key caps are fully symmetric in all four...

$5.95

In stock

Black Pudding Keycaps - 24 Piece Keyboard Add-On Kit

Product ID: 5148

Dress up the mechanical keys in your keyboard or NeoKey project with this add-on 24-pack of Black Pudding Key Caps. These key caps are designed with a milky translucent dual-layer that lets gorgeous NeoPixels glow through. They come in assorted profiles and lengths, allowing you to populate your keyboard/keypad project like mini theatre stadium seating. These keycaps...

$7.50

83 in stock

Grouped shot of 10 pack DSA color keycap Blue KIT

Blue DSA Keycaps for MX Compatible Switches - 10 pack

Product ID: 5005

Dress up your mechanical keys in your favorite colors, with a wide selection of stylish DSA key caps. Here is a 10 pack of blue DSA keycaps for your next mechanical keyboard or NeoKey project. Snap 'em onto any Cherry MX or compatible switch to turn your Feather or breakout into the lil'est macro keypad. DSA profile key caps are fully symmetric in all four...

$5.95

In stock

Group shot of 10 pack DSA color keycap BLUE TRANSPARENT KIT8

Translucent Blue DSA Keycaps for MX Compatible Switches - 10 pack

Product ID: 5014

Dress up your mechanical keys in your favorite colors, with a wide selection of stylish DSA key caps. Here is a 10 pack of translucent blue DSA keycaps for your next mechanical keyboard or NeoKey project. Snap 'em onto any Cherry MX or compatible switch to turn your Feather or breakout into the lil'est macro keypad. DSA profile key caps are fully symmetric in all...

$5.95

In stock

Angled shot of single black 1U R4 lamp keycap.

Black Windowed Lamp R4 Keycap for MX Compatible Switches

Product ID: 5112

These stark and elegant Black Windowed Lamp R4 Keycaps are made of opaque black plastic with a small cutout in the south-center edge that wraps around the top and bottom. The cut-out has a clear plastic window to allow an LED installed under the switch to glow through. They add a bit of the je ne sais quoi to your keeb or macropad build and are...

$4.95

In stock

Etched Glow-Through Keycap with Open Source Hardware Gear Logo - MX Compatible Switches

Product ID: 5115

Show off your open-source hardware flair with a super-classy, custom-made Open Source Hardware Gear Logo Etched Keycap. It's made with a translucent/opaque plastic that is etched to create an elegant glow-through effect. Perfect to show your hacker/maker cred on your next mechanical keyboard project. Snaps onto any Cherry MX or compatible switch. Since the logo is...

$4.95

28 in stock

White MA Keycaps for MX Compatible Switches - 5 pack

Product ID: 5170

Dress up your mechanical keys in your favorite colors with a wide selection of gumdrop-like, retro, curvy, and stylish MA profile keycaps. Here is a 5 pack of White MA Keycaps for your next mechanical keyboard or NeoKey project. Snap 'em onto any Cherry MX or compatible switch to turn your Feather or breakout into the lil'est macro keypad. MA profile keycaps are...

$4.95

In stock

Grouped shot of 10 pack DSA color keycap purple KIT

Purple DSA Keycaps for MX Compatible Switches - 10 pack

Product ID: 5003

Dress up your mechanical keys in your favorite colors, with a wide selection of stylish DSA key caps. Here is a 10 pack of purple DSA keycaps for your next mechanical keyboard or NeoKey project. Snap 'em onto any Cherry MX or compatible switch to turn your Feather or breakout into the lil'est macro keypad. DSA profile key caps are fully symmetric in all four...

$5.95

In stock

Purple MA Keycaps for MX Compatible Switches - 5 pack

Product ID: 5177

Dress up your mechanical keys in your favorite colors with a wide selection of gumdrop-like, retro, curvy, and stylish MA profile keycaps. Here is a 5 pack of Purple MA Keycaps for your next mechanical keyboard or NeoKey project. Snap 'em onto any Cherry MX or compatible switch to turn your Feather or breakout into the lil'est macro keypad. MA profile keycaps are...

$4.95

In stock

Etched Glow-Through Keycap with GitHub Octocat Logo - MX Compatible Switches

Product ID: 5192

Show off your social-coding flair with a super-classy, custom-made and officially licensed Octocat Etched Keycap featuring the GitHub logo. It's made with a translucent/opaque plastic that is etched to create an elegant glow-through effect. Perfect to show your coder cred on your next mechanical keyboard project or to remind yourself how to escape from vim. Snaps...

$4.95

In stock

Translucent Red DSA Keycaps for MX Compatible Switches - 10 pack

Product ID: 5007

Dress up your mechanical keys in your favorite colors, with a wide selection of stylish DSA key caps. Here is a 10 pack of translucent red DSA keycaps for your next mechanical keyboard or NeoKey project. Snap 'em onto any Cherry MX or compatible switch to turn your Feather or breakout into the lil'est macro keypad. DSA profile key caps are fully symmetric in all four...

$5.95

In stock

Top view of disassembled Caps Lock keycap molds

4 x 1U and 1 x 1.75U "Caps Lock" Silicone Keycap Molds - MX Compatible Switches

Product ID: 5078

If you love to customize, why not level up your DIY keeb-makin' skills and craft your own set of bespoke 'caps with this keycap mold that has four "1U R4" (e.g. single square escape-key-like) molds and one 1.75U Caps Lock Keycap Molds. We recommend UV-curable resin, yes you'll need a UV lamp, but it's worth the investment: two-part resin is much messier and hard to...

$3.95

38 in stock

Pink DSA Keycaps for MX Compatible Switches - 10 pack

Product ID: 5002

Dress up your mechanical keys in your favorite colors, with a wide selection of stylish DSA key caps. Here is a 10 pack of pink DSA keycaps for your next mechanical keyboard or NeoKey project. Snap 'em onto any Cherry MX or compatible switch to turn your Feather or breakout into the lil'est macro keypad. DSA profile key caps are fully symmetric in all four...

$5.95

9 in stock

Angled shot of 10 lavender plastic keycaps.

Lavender DSA Keycaps for MX Compatible Switches - 10 pack

Product ID: 5004

Dress up your mechanical keys in your favorite colors, with a wide selection of stylish DSA key caps. Here is a 10 pack of lavender DSA keycaps for your next mechanical keyboard or NeoKey project. Snap 'em onto any Cherry MX or compatible switch to turn your Feather or breakout into the lil'est macro keypad. DSA profile key caps are fully symmetric in all four...

$5.95

In stock

Light Up Key Switch Keychain - Blue LED - MX Compatible Switches

Product ID: 5169

If you have one of our etched glow-through keycaps, this adorable, bite-sized Key Switch Keychain is the perfect accessory to show it off. It's basically a satisfying clicky tactile key switch, with a blue LED and a CR1220 battery. Press the button to connect the LED to the battery and ka-pow! Your keycap lights up. Way easier than doing a custom DIY keyboard build,...

$7.95

66 in stock

Angled shot of 10 Light Blue plastic keycaps.

Light Blue DSA Keycaps for MX Compatible Switches - 10 pack

Product ID: 5006

Dress up your mechanical keys in your favorite colors, with a wide selection of stylish DSA key caps. Here is a 10 pack of light blue DSA keycaps for your next mechanical keyboard or NeoKey project. Snap 'em onto any Cherry MX or compatible switch to turn your Feather or breakout into the lil'est macro keypad. DSA profile key caps are fully symmetric in all four...

$5.95

In stock

Angled shot of translucent smoke keyboard shell.

Translucent Smoke Plastic 60% / GH60 Keyboard Shell

Product ID: 5084

Back in my day, if you wanted a mechanical keyboard, you had to purchase a massive IBM Model M Keyboard but now you can DIY your very own compact keyboards with your very favorite layouts to make the keeb of your dreams. For all the DIY keebfans in the house here is a Translucent Smoke Keyboard 60% (GH60) Shell, the perfect base to begin your custom keyboard project,...

$14.95

59 in stock

Angled shot of Black Anodized Aluminum Metal Keyboard Plate.

Anodized Black Aluminum Metal Keyboard Plate for GH60 Cases

Product ID: 5075

If you want a nice solid feel to your DIY keeb, this metal plate will let you snap in all your MX-compatible key switches and hold them nice and solid. This is specifically designed for the common "GH60" / 60% keyboard layout. You will still need a GH60 enclosure of choice, PCB, and all the components. It makes the perfect middle sandwich support to hold your...

$14.95

47 in stock

Group shot of 10 pack DSA color keycap DARK GREY KIT

Dark Gray DSA Keycaps for MX Compatible Switches - 10 pack

Product ID: 5012

Dress up your mechanical keys in your favorite colors, with a wide selection of stylish DSA key caps. Here is a 10 pack of Adafruit Dark Gray DSA keycaps for your next mechanical keyboard or NeoKey project. Snap 'em onto any Cherry MX or compatible switch to turn your Feather or breakout into the lil'est macro keypad. DSA profile key caps are fully symmetric in all...

$5.95

33 in stock

Etched Glow-Through Keycap with Glitch Logo - MX Compatible Switches

Product ID: 5331

Show off your social-coding flair with a super-classy, custom-made and officially licensed Glitch Logo Etched Keycap. It's made with a translucent/opaque plastic that is etched to create an elegant glow-through effect. Perfect to show your coder cred on your next mechanical keyboard project or to automatically launch your online coding project on glitch.com! Snaps...

$4.95

In stock

Angled shot of two black aluminum bumper feet.

Black Anodized Aluminum Bumper Feet - Pack of 2

Product ID: 5051

Keep your electronics from going barefoot, and give them sleek cyberpunk metal feet! These aluminum bumpers are originally designed for keyboard enclosures that are made of anodized aluminum with a black rubber nubbin embedded inside for no-slip support. They're so cool looking we figure they could be your new favorite accessory. Use the included M4-threaded machine...

$8.95

34 in stock

Etched Glow-Through Keycap with LGTM (Looks Good To Me) Acronym - MX Compatible Switches

Product ID: 5195

Why use many words when less is just as good? Save yourself some typing and approve PR's with a click of a button thanks to this super-classy and custom-made LGTM Etched Keycap. It's made with a translucent/opaque plastic that is etched to create an elegant glow-through effect. Perfect to complement your effortless collaborative reviews. Snaps onto any Cherry MX or...

$4.95

In stock

Orange MA Keycaps for MX Compatible Switches - 5 pack

Product ID: 5175

Dress up your mechanical keys in your favorite colors with a wide selection of gumdrop-like, retro, curvy, and stylish MA profile keycaps. Here is a 5 pack of Orange MA Keycaps for your next mechanical keyboard or NeoKey project. Snap 'em onto any Cherry MX or compatible switch to turn your Feather or breakout into the lil'est macro keypad. MA profile keycaps are...

$4.95

In stock

Angled shot of felt padding for keyboard enclosures.

Felt Padding for 60% / GH60 Keyboard Cases

Product ID: 5136

This Felt Padding is for if you want extra cushioning for your DIY keeb. This is specifically designed for the common "GH60" / 60% keyboard layout. You will still need a GH60 enclosure of choice, PCB, and all the components. It makes the perfect mattress support to protect your keyboard PCB and maybe even provides a little protection from dust and crumbs. Note: This...

$6.95

In stock

Top view of two-piece rubber kitty paw keycap molds

Kitty Paw Silicone Keycap Molds - MX Compatible Switches

Product ID: 5076

If you love our Kitty Paw Keycaps and love to customize, why not level up your DIY keeb-makin' skills and craft your own set of bespoke 'caps with these Kitty Paw Keycap Molds. If your kitty's paws are going to walk all over your keyboard, you at least want to be able to walk all over kitty paws. We recommend UV-curable resin, yes you'll need a UV lamp but its worth...

$3.95

93 in stock

Top view of two Tab keycap molds separated.

4 x 1U and 1 x 1.5U "Tab" Silicone Keycap Molds - MX Compatible Switches

Product ID: 5077

If you love to customize, why not level up your DIY keeb-makin' skills and craft your own set of bespoke 'caps with this keycap mold that has four "1U R2" (e.g. single square escape-key-like) molds and one 1.5U Tab Keycap Molds. We recommend UV-curable resin, yes you'll need a UV lamp, but it's worth the investment: two-part resin is much messier and hard to cure if...

$3.95

23 in stock

3 x 1U and 2 x 1.25U "Ctrl" Silicone Keycap Molds - MX Compatible Switches

Product ID: 5079

If you love to customize, why not level up your DIY keeb-makin' skills and craft your own set of bespoke 'caps with this keycap mold that has three "1U R1" (e.g. single bottom row key) molds and two 1.25U Ctrl Keycap Molds. We recommend UV-curable resin, yes you'll need a UV lamp, but it's worth the investment: two-part resin is much messier and hard to cure if the...

$3.95

34 in stock

Light Gray DSA Keycaps for MX Compatible Switches - 10 pack

Product ID: 4999

Dress up your mechanical keys in your favorite colors, with a wide selection of stylish DSA key caps. Here is a 10 pack of light gray DSA keycaps for your next mechanical keyboard or NeoKey project. Snap 'em onto any Cherry MX or compatible switch to turn your Feather or breakout into the lil'est macro keypad. DSA profile key caps are fully symmetric in all four...

$5.95

In stock

Top view of two piece Spacebar keycap mold.

2 x 2.25U, 1 x 2.75U and Space Bar Keycap Mold - MX Compatible Switches

Product ID: 5080

If you love to customize, why not level up your DIY keeb-makin' skills and craft your own set of bespoke 'caps with this keycap mold that has two 2.25U molds (Left Shift and Enter), a 2.75U mold (Right Shift), and one looooooooooooongboi 6.25U Space Bar Keycap Mold. We recommend UV-curable resin, yes you'll need a UV lamp, but it's worth the investment: two-part...

$4.50

12 in stock

Etched Glow-Through Keycap with Pull Request Logo - MX Compatible Switches

Product ID: 5196

Code is written, linted, passing CI tests and you are ready to contribute back! Last step? Press this super-classy and custom-made Pull Request Etched Keycap! It's made with a translucent/opaque plastic that is etched to create an elegant glow-through effect. Perfect to show your coder cred on your next mechanical keyboard project and to remind you of what it's all...

$4.95

In stock

Etched Glow-Through Keycap with "wont fix" Text - MX Compatible Switches

Product ID: 5197

It's not a bug, it's a feature! Make quick work of your Pivotals or assigned issue with a click of a button thanks to this super-classy and custom-made wont fix Etched Keycap. It's certain to spark delightful conversations about how awful you are for not acceding to every demand. It's made with a translucent/opaque plastic that is etched to create an elegant...

$4.95

90 in stock

Adafruit Etched R4 Keycap for MX Compatible Switches

Product ID: 5094

Keep your 'fruit close at hand with a super-classy, custom-made Etched Adafruit Keycap. It's made with a translucent/opaque plastic that is etched to create an elegant glow-through effect. Perfect to show your hacker/maker cred on your next mechanical keyboard project. Snaps onto any Cherry MX or compatible switch. Since the logo is centered, you'll get a glow...

$4.95

In stock

Angled shot of clear plastic keyboard shell.

Clear Plastic 60% / GH60 Keyboard Shell

Product ID: 5083

Back in my day, if you wanted a mechanical keyboard, you had to purchase a massive IBM Model M Keyboard but now you can DIY your very own compact keyboards with your very favorite layouts to make the keeb of your dreams. For all the DIY keebfans in the house here is a Clear Plastic Keyboard 60% (GH60) Shell, the perfect base to begin your custom keyboard project,...

$14.95

55 in stock

Pastel Pink MA Keycaps for MX Compatible Switches - 5 pack

Product ID: 5178

Dress up your mechanical keys in your favorite colors with a wide selection of gumdrop-like, retro, curvy, and stylish MA profile keycaps. Here is a 5 pack of Pink MA Keycaps for your next mechanical keyboard or NeoKey project. Snap 'em onto any Cherry MX or compatible switch to turn your Feather or breakout into the lil'est macro keypad. MA profile keycaps are fully...

$4.95

In stock

Angled shot of two gray aluminum bumper feet.

Gray Anodized Aluminum Bumper Feet - Pack of 2

Product ID: 5049

$8.95

13 in stock

Light Up Key Switch Keychain - Red LED - MX Compatible Switches

Product ID: 5166

If you have one of our etched glow-through keycaps, this adorable, bite-sized Key Switch Keychain is the perfect accessory to show it off. It's basically a satisfying clicky tactile key switch, with a red LED and a CR1220 battery. Press the button to connect the LED to the battery and ka-pow! Your keycap lights up. Way easier than doing a custom DIY keyboard build,...

$7.95

53 in stock

Angled shot of 10 mint screen MA keycaps.

Mint Green MA Keycaps for MX Compatible Switches - 5 pack

Product ID: 5173

Dress up your mechanical keys in your favorite colors with a wide selection of gumdrop-like, retro, curvy, and stylish MA profile keycaps. Here is a 5 pack of Green MA Keycaps for your next mechanical keyboard or NeoKey project. Snap 'em onto any Cherry MX or compatible switch to turn your Feather or breakout into the lil'est macro keypad. MA profile keycaps are...

$4.95

In stock

Light Up Key Switch Keychain - Green LED - MX Compatible Switches

Product ID: 5167

If you have one of our etched glow-through keycaps, this adorable, bite-sized Key Switch Keychain is the perfect accessory to show it off. It's basically a satisfying clicky tactile key switch, with a green LED and a CR1220 battery. Press the button to connect the LED to the battery and ka-pow! Your keycap lights up. Way easier than doing a custom DIY keyboard build,...

$7.95

In stock

Grouped shot of 10 pack DSA color keycap Light Purple KIT

Light Purple DSA Keycaps for MX Compatible Switches - 10 pack

Product ID: 5101

$5.95

In stock

Etched Glow-Through Keycap - Zener ESP Star Design - MX Compatible Switches

Product ID: 5105

When we saw the classic "Zener ESP Card" designed keyboard in the awesome CHVRCHES video for the song "How Not To Drown" (ft Robert Smith!) we were smitten. So goth! So esoteric! So we got a small number of these etched-through keycaps with the 5 designs: circle, cross, waves, square, and star. You don't have to wear excessive eyeliner to snap these into your...

$4.95

In stock

Angled shot of five milky white MA keycap.

Milky White MA Keycaps for MX Compatible Switches - 5 pack

Product ID: 5171

$4.95

94 in stock

Angled shot of assembled 4-key aluminum keypad shell with key switches and colored keycaps.

Four Key Silver Aluminum Keypad Shell Enclosure - MX Compatible Switches

Product ID: 5073

For all the DIY keebfans in the house here is a super sleek and sturdy 4-Key Aluminum Keypad Shell in Silver, the perfect base to begin your custom keypad project. You provide the PCB in the housing and bolt it into this base. Makes for a prettier build with more protection than just layers of PCB or acrylic. While it's designed for a custom PCB, you could also just...

$19.95

24 in stock

Angled shot of 2-key aluminum keypad shell assembled with Kailh key switches and clear keycaps.

Two Key Black Aluminum Keypad Shell Enclosure - MX Compatible Switches

Product ID: 5081

For all the DIY keebfans in the house here is a super sleek and sturdy 2-Key Aluminum Keypad Shell in Black, the perfect base to begin your custom keypad project. You provide the PCB in the housing and bolt it into this base. Makes for a prettier build with more protection than just layers of PCB or acrylic. While it's designed for a custom PCB, you could also just...

$14.95

55 in stock

Angled shot of Silver Anodized Metal 60% / GH60 Keyboard Shell Plate.

Anodized Aluminum Metal Keyboard Plate for 60% / GH60 Cases

Product ID: 5133

$14.95

72 in stock

Angled shot of five cream orange MA keycaps.

Orange Cream MA Keycaps for MX Compatible Switches - 5 pack

Product ID: 5176

Dress up your mechanical keys in your favorite colors with a wide selection of gumdrop-like, retro, curvy, and stylish MA profile keycaps. Here is a 5 pack of Orange Cream MA Keycaps for your next mechanical keyboard or NeoKey project. Snap 'em onto any Cherry MX or compatible switch to turn your Feather or breakout into the lil'est macro keypad. MA profile keycaps...

$4.95

In stock

Angled shot of two silver aluminum bumper feet.

Silver Anodized Aluminum Bumper Feet - Pack of 2

Product ID: 5055

$8.95

56 in stock

Etched Glow-Through Keycap - Zener ESP Waves Design - MX Compatible Switches

Product ID: 5104

When we saw the classic "Zener ESP Card" designed keyboard in the awesome CHVRCHES video for the song "How Not To Drown" (ft Robert Smith!) we were smitten. So goth! So esoteric! So we got a small number of these etched-through keycaps with the 5 designs: circle, cross, waves, square and star. You don't have to wear excessive eyeliner to snap these into your...

$4.95

In stock

Angled shot of purple aluminum keyboard shell.

Purple Anodized Aluminum 60% / GH60 Keyboard Shell

Product ID: 5072

Back in my day, if you wanted a mechanical keyboard, you had to purchase a massive IBM Model M Keyboard but now you can DIY your very own compact keyboards with your very favorite layouts to make the keeb of your dreams. For all the DIY keebfans in the house here is a super sleek and sturdy Purple Anodized Aluminum Keyboard 60% (GH60) Shell, the perfect base to begin...

$74.95

81 in stock

Angled shot of Clear Plastic 65% / K68 Keyboard Shell.

Clear Plastic 65% / JKDK K68 Keyboard Shell

Product ID: 5085

Back in my day, if you wanted a mechanical keyboard, you had to purchase a massive IBM Model M Keyboard but now you can DIY your very own compact keyboards with your very favorite layouts to make the keeb of your dreams. For all the DIY keebfans in the house here is a Clear Plastic 65% Keyboard Shell aka a "JKDK K68" type enclosure. Its the perfect base to begin your...

$29.95

41 in stock

Black Aluminum Kitty Paw Keycap with Pink Silicone Toes - MX Compatible Switches

Product ID: 4971

If your kitty's paws are going to walk all over your keyboard, you at least want to be able to walk all over kitty paws. Get ready to clacky to your heart's content with an adorable Black Aluminum Kitty Paw Keycap with Pink Silicone Toe Beans for your next mechanical keyboard or NeoKey project. Snap 'em onto a Cherry MX or compatible switch to turn your Feather or...

$16.50

In stock

Etched Glow-Through Keycap - Zener ESP Square Design - MX Compatible Switches

Product ID: 5106

$4.95

In stock

Angled shot of two purple aluminum bumper feet.

Purple Anodized Aluminum Bumper Feet - Pack of 2

Product ID: 5050

$8.95

In stock

Translucent Smoke Plastic 65% / JKDK K68 Keyboard Shell

Product ID: 5086

Back in my day, if you wanted a mechanical keyboard, you had to purchase a massive IBM Model M Keyboard but now you can DIY your very own compact keyboards with your very favorite layouts to make the keeb of your dreams. For all the DIY keebfans in the house here is a Translucent Smoke Plastic 65% (K68) Keyboard Shell aka a "JKDK K68" type enclosure. It's the perfect...

$29.95

38 in stock

Etched Glow-Through Keycap - Zener ESP Plus Design - MX Compatible Switches

Product ID: 5107

$4.95

In stock

Etched Glow-Through Keycap with Hate Fork Graphics - MX Compatible Switches

Product ID: 5194

See some code & think you could do better? There ain't nothing that motivates stronger than HDD (hate driven development). If that's your bag then you can show off your predilections with this custom-made Hate Fork Etched Keycap. It's made with a translucent/opaque plastic that is etched to create an elegant glow-through effect. Perfect to show your preference...

$4.95

In stock

Red MA Keycaps for MX Compatible Switches - 5 pack

Product ID: 5172

Dress up your mechanical keys in your favorite colors with a wide selection of gumdrop-like, retro, curvy, and stylish MA profile keycaps. Here is a 5 pack of Red MA Keycaps for your next mechanical keyboard or NeoKey project. Snap 'em onto any Cherry MX or compatible switch to turn your Feather or breakout into the lil'est macro keypad. MA profile keycaps are fully...

$4.95

In stock

Angled shot of Anodized Purple Aluminum Metal Keyboard Plate.

Anodized Purple Aluminum Metal Keyboard Plate for GH60 Case

Product ID: 5074

$14.95

92 in stock

Etched Glow-Through Keycap - Zener ESP Circle Design - MX Compatible Switches

Product ID: 5108

When we saw the classic "Zener ESP Card" designed keyboard in the awesome CHVRCHES video for the song "How Not To Drown" (ft Robert Smith!) we were smitten. So goth! So esoteric! So we got a small number of these etched-through keycaps with the 5 designs: circle, cross, waves, square and star. You don't have to wear excessive eyeliner to snap these into your...

$4.95

In stock

Angled shot of two red aluminum bumper feet.

Red Anodized Aluminum Bumper Feet - Pack of 2

Product ID: 5052

$8.95

56 in stock

Light Up Key Switch Keychain - White LED - MX Compatible Switches

Product ID: 5168

If you have one of our etched glow-through keycaps, this adorable, bite-sized Key Switch Keychain is the perfect accessory to show it off. It's basically a satisfying clicky tactile key switch, with a white LED and a CR1220 battery. Press the button to connect the LED to the battery and ka-pow! Your keycap lights up. Way easier than doing a custom DIY keyboard build,...

$7.95

43 in stock

Angled shot of two green aluminum bumper feet.

Green Anodized Aluminum Bumper Feet - Pack of 2

Product ID: 5053

$8.95

8 in stock

Angled shot of two blue aluminum bumper feet.

Blue Anodized Aluminum Bumper Feet - Pack of 2

Product ID: 5054

$8.95

49 in stock

Lavender Plastic 60% / GH60 Keyboard Shell

Product ID: 5082

Back in my day, if you wanted a mechanical keyboard, you had to purchase a massive IBM Model M Keyboard but now you can DIY your very own compact keyboards with your very favorite layouts to make the keeb of your dreams. For all the DIY keebfans in the house here is a Lavender Plastic Keyboard 60% (GH60) Shell, the perfect base to begin your custom keyboard project...

$14.95

In stock

Etched Glow-Through Keycap with Digi-Key Logo - MX Compatible Switches

Product ID: 5143

When it's time to order components for your electronic product, where else is there to go but Digi-Key? With literally millions of parts available, its a one-stop-candy-shop from prototype to production. If you're like, us, visiting multiple times a day, why not dedicate a spot on your keyboard with a super-classy, custom-made, and officially licensed Etched Keycap...

$4.95

In stock

Adafruit MacroPad RP2040 Starter Kit - 3x4 Keys + Encoder + OLED - ADABOX019 Essentials

Product ID: 5128

Strap yourself in, we're launching in T-minus 10 seconds...Destination? A new Class M planet called MACROPAD! M here stands for Microcontroller because this 3x4 keyboard controller features the newest technology from the Raspberry Pi sector: say hello to the RP2040. It's a speedy little microcontroller with lots of GPIO pins and 64 times more RAM than the Apollo...

Notify Me

$49.95

Out of stock

Notify Me

Group shot of 10 pack DSA color keycap FLUORESCENT GREEN KIT

Neon Green DSA Keycaps for MX Compatible Switches - 10 pack

Product ID: 5015

Dress up your mechanical keys in your favorite colors, with a wide selection of stylish DSA key caps. Here is a 10 pack of neon green DSA keycaps for your next mechanical keyboard or NeoKey project. Snap 'em onto any Cherry MX or compatible switch to turn your Feather or breakout into the lil'est macro keypad. DSA profile key caps are fully symmetric in all four...

Notify Me

$5.95

Out of stock

Notify Me

A white hand with pink fingernails above a big orange key switch for scale.

Kailh Big Mechanical Key Switch - Tactile Burnt Orange - 1 Piece

Product ID: 5306

Kailh Big Switch Series comes to Adafruit! These switches are 4 times bigger on each side than a normal MX switch. That comes up to 64 times bigger in volume. Yet, these switches are fully functional. Use as a fidget toy, or solder into a NeoKey trinkey to make the largest Escape key known to humankind. Comes as a large single key switch with keycap. Type: Tactile....

Notify Me

$19.95

Out of stock

Notify Me

Angled shot of 9 5-packs of different colored MA keycaps.

MA Profile Keycaps for MX Compatible Switches - 5 packs

Product ID: 5226

Dress up your mechanical keys in your favorite colors with a wide selection of gumdrop-like, retro, curvy, and stylish MA profile keycaps. Snap 'em onto any Cherry MX or compatible switch to turn your Feather or breakout into the lil'est macro keypad. MA profile keycaps are fully symmetric in all four directions and are fairly flat so they are great for macro pads....

More Info

In stock

More Info

DSA Keycaps for MX Compatible Switches in Various Colors

Product ID: 5097

Dress up your mechanical keys in your favorite colors, with a wide selection of stylish DSA key caps. Here is a 10 pack different colored keycaps for your next mechanical keyboard or NeoKey project. Snap 'em onto a Cherry MX or compatible switch to turn your Feather or breakout into the lil'est macro keypad. The translucent plastic makes for a glow-friendly switch....

More Info

In stock

More Info

Black Metallic-Look Plastic GH60 / 60% Keyboard Shell

Product ID: 5132

Back in my day, if you wanted a mechanical keyboard, you had to purchase a massive IBM Model M Keyboard but now you can DIY your very own compact keyboards with your very favorite layouts to make the keeb of your dreams. For all the DIY keebfans in the house here is a Black Metallic-Look Plastic GH60 Keyboard Shell. It's made of injection-molded plastic but it has a...

Notify Me

$17.50

Out of stock

Notify Me

Top down view of four piles of Kailh key switches in Red, Black, Brown, and Black variations.

Kailh Mechanical Key Switches - 10 packs - Cherry MX Compatible

Product ID: 4996

For crafting your very own custom keyboard, these Kailh mechanical key switches are deeee-luxe! Come in a pack of 10 switches, plenty to make a small keyboard, or grab a few packs to build a full keyboard. Use these with our NeoKey boards, such as the Socket Breakout and the FeatherWing.They work great with mechanical key sockets if you want to avoid soldering.We...

More Info

In stock

More Info

Top view of six different keycap mold sets.

Silicone Keycap Molds - MX Compatible Switches

Product ID: 5184

If you love to customize, why not level up your DIY keeb-makin' skills and craft your own set of bespoke 'caps with these Silicone Keycap Molds. We recommend UV-curable resin, yes you'll need a UV lamp, but it's worth the investment: two-part resin is much messier and hard to cure if the temperature and humidity aren't just right. Check out this video for a great...

More Info

In stock

More Info

Light Up Key Switch Keychains in Various Colors - MX Compatible Switches

Product ID: 5241

If you have one of our etched glow-through keycaps, this adorable, bite-sized Key Switch Keychain is the perfect accessory to show it off. It's basically a satisfying clicky tactile key switch, with an LED and a CR1220 battery. Press the button to connect the LED to the battery and ka-pow! Your keycap lights up. Way easier than doing a custom DIY keyboard build, and...

More Info

In stock

More Info

4 x 1U and 1 x 2U "Esc" Silicone Keycap Molds - MX Compatible Switches

Product ID: 5119

If you love to customize, why not level up your DIY keeb-makin' skills and craft your own set of bespoke 'caps with this keycap mold that has four "1U R1" (e.g. single function-key-like) molds and one 2U Esc Keycap Molds. Depending on your keyboard, the key could also be used for Enter, Backspace, etc. We recommend UV-curable resin, yes you'll need a UV lamp, but...

$3.95

10 in stock

Angled shot of assembled 4x4 keypad shell with Kailh key switches and clear keycaps.

4x4 Key Deluxe Aluminum Keypad Shell Enclosure

Product ID: 5071

For all the DIY keebfans in the house here is a very fancy and sturdy 4x4 Keypad Shell in Dark Gray with silver accents, the perfect base to begin your custom keypad project. You provide the PCB in the 4x4 housing and bolt it into this base. This multi-part enclosure is super luxe, with milled and anodized solid aluminum and a hinge that will let you angle the box....

$39.95

26 in stock

Etched Glow-Through Keycap with GIT Logo - MX Compatible Switches

Product ID: 5193

Show off your social-coding flair with a super-classy and custom-made GIT Etched Keycap featuring the open-source management software logo. It's made with a translucent/opaque plastic that is etched to create an elegant glow-through effect. Perfect to show your coder cred on your next mechanical keyboard project or to create a macro that commits-and-pushes in one go....

$4.95

In stock

Clear Kailh CHOC Slim Key Caps x 10 pack

Product ID: 5110

Dress up your svelte CHOC mechanical keys with these elegant crystaline keycaps. These are thin and flat so they're great for slim Kailh 'Chocolate' key switches. Please note these are NOT MX COMPATIBLE! They cannot be used with 'MX' switches, the mounting nub is totally different. Note: This product is just a pack of 10 key caps. Key switches are not included!

More Info

Discontinued

More Info

Etched Glow-Through Keycap with Hackaday Logo - MX Compatible Switches

Product ID: 5116

These are not for sale! Only available to those who have won the keycap by attending our Hack-a-Day hackchat and being selected in the drawing. Keep your 'fruit close at hand with a super-classy, custom-made Etched Hackaday Keycap. It's made with a translucent/opaque plastic that is etched to create an elegant glow-through effect. Perfect to show your hacker/maker...

More Info