In stock

Premium Female/Female Jumper Wires - 40 x 6"

Product ID: 266

Handy for making wire harnesses or jumpering between headers on PCB's. These premium jumper wires approximately 6" (150mm) long and come in a 'strip' of 40 (4 pieces of each of ten colors). They have 0.1" sockets on either end and fit cleanly next to each other on standard-pitch 0.1" (2.54mm) header. We recentlty updated these so they are in a 'ribbon strip' instead...

$3.95

In stock

Half-Size Breadboard with Mounting Holes

Product ID: 4539

This cute 3.2″ × 2.1″ (82 × 53mm) solderless half-size breadboard has four bus lines and 30 rows of pins, our favorite size of solderless breadboard for projects. You get a whoppin' 400 tie points! Plug in a Feather or Metro Mini with the rest for sensors or buttons or even a little display. You can pull the power rails off easily to make the...

$5.00

In stock

Top view of three fanned out Adafruit Perma-Proto Quarter-sized Breadboard PCBs.

Product ID: 1953

These Female/Male 'extension' jumper wires for making wire harnesses or jumpering between headers on PCB's. These premium jumper wires are 3" (75mm) long and come in a 'strip' of 20 (2 pieces of each of ten rainbow colors). They have 0.1" male header contacts on one end and 0.1" female header contacts on the other. They fit cleanly next to each other on...

$1.95

In stock

Angled shot of 20cm long 4-pin 2.54mm pitch cable.

Product ID: 3255

For bread-boarding with unusual non-header-friendly surfaces, these cables will be your best friends! No longer will you have long strands of alligator clips that are grabbing little wires. These compact jumper cables have a premium male header on one end, and a grippy mini alligator clip on the other. Grab onto your Flora, Circuit Playground, micro:bit, Gemma, or...

$7.95

In stock

Overhead shot of 5x5 aluminum prototyping grid populated with a microcontroller and two breakout boards.

Adafruit Swirly Aluminum Mounting Grid for 0.1" Spaced PCBs - 5x5

Product ID: 5779

$3.95

In stock

Premium Male/Male Jumper Wires - 40 x 3" (75mm)

Product ID: 759

Handy for making wire harnesses or jumpering between headers on PCB's. These premium jumper wires are 3" (75mm) long and come in a 'strip' of 40 (4 pieces of each of ten rainbow colors). They have 0.1" male header contacts on either end and fit cleanly next to each other on standard-pitch 0.1" (2.54mm) header. The best part is they come in a 40-pin ribbon cable. You...

$3.95

In stock

Silicone Cover Stranded-Core Wire - 2m 30AWG Black

Product ID: 2003

Product ID: 1492

Connect to those pesky 0.5mm pitch connectors that you may run across with an FPC stick. We designed this for use in house, to quickly connect to 50pin 0.5mm pitch flex cables we need to test. But we also thought it might be useful for our customers. There's a 50-pin long connector on top, and we have one very long 'mechanical' pad. Since the pad extends along the...

$2.95

In stock

Bundle of multi-colored multi-length wire jumpers

Breadboarding wire bundle

Product ID: 153

75 flexible stranded core wires with stiff ends molded on in red, orange, yellow, green, blue, brown, black and white. These are a major improvement over the "box of bent wires" that are sometimes sold with breadboards, and faster than stripping your own solid core wires. Makes breadboarding super fast. Approximately 75 wires in a mix of colors. ~55 short wires 4.5"...

$4.95

In stock

Angled Shot of Large Solderless Breadboard.

Large Premium Solderless Breadboard

Product ID: 443

For really big projects, give yourself some room to work in, with a massive 2250-point breadboard - equivalent in size to three full-sized breadboards side by side. The breadboards are mounted onto a metal plate and comes with 4 colored posts you can use with a bench-top supply. Four bumpers are included, to keep the board from slipping around your desk. As of Dec...

$19.95

46 in stock

Product ID: 3164

$4.95

In stock

DIY HDMI Cable Parts - Straight Mini HDMI Plug Adapter

Product ID: 3552

If you love DIY cable-rigging, then these HDMI adapters are right up your alley! Making custom HDMI cables has never been easier. Just grab one of our HDMI ribbon cables, then swap and switch any of our HDMI adapters on each end using the flex cable clips. There are options a-plenty! This version is a straight Mini HDMI plug. Ribbon cable and other adapter not...

$6.50

In stock

Snap-action 3-Wire Block Connector with two wires installed

Snap-action 3-Wire Block Connector (12-28 AWG) - Pack of 3

Product ID: 866

These are like the fancy electronics equivalent of the wire nuts electricians use to bind wires together. They are a lot easier to use as well! Each block connector has a metal block inside and three levers that snap open and close to bind stranded/solid-core wire. No screwdrivers required! They're super handy for free wiring and can handle up to 20A at 300V with UL...

$2.95

39 in stock

Angled shot of single Universal Proto-Board PCB 5cm x 7cm

Universal Proto-Board PCBs 5cm x 7cm - 3 Pack

Product ID: 4786

Here's a handy 3-pack of 5cm x 7cm Proto-board PCBs in green. Both sides have a green silkscreen with some row/column markings. Note that these don't have any traces between the PCB holes, you would normally bend over a thru-hole lead to create connections. They're also good for just plain mechanical work because they are made of strong FR4 There are also four...

$2.95

In stock

Half-size breadboard with a soldered skinny green microcontroller.

Solderless Breadboard for Raspberry Pi Pico by Monk Makes

Product ID: 5422

Product ID: 3174

This is a box of ten 25ft spools of solid-core wire. The wire is easy to solder to, and when bent it keeps its shape pretty well. We like to have a few spools of this stuff around which is why this set is quite nice! We suggest picking up some wire strippers to match. Wire gauge is 22 AWG, which we've found is the best all-around gauge, and it works best with...

$29.95

In stock

Angled shot of 3-to-9 Wiring Block Connector assembled with blue, yellow, and red wires.

Snap Action 3-to-9 Wiring Block Connector - Clear DF-93

Product ID: 5614

Snap action blocks are perfect when you have to quickly wire up a bunch of free-hanging components, and you don't want to solder. They're much easier to use than wire nuts, and of course they are reuse-able and do not require any crimping! This is a 3 to 9 wire block: there are three separate inputs, and three sets of three outputs. They're color coded so easy to...

$2.95

77 in stock

Angled shot of a single Pogo Pin - spear head.

Pogo Pins "Spear Head" (10 pack) - P75-LM3

Product ID: 394

Pogo pins are little spring-loaded contacts, very handy for making jigs, or making momentary (but electrically solid) contacts. We use them by the dozen for making programming and testing jigs but they're handy also if say you want to JTAG program a board that you cant solder headers to - just shove these thin contacts into a 0.1" pitch IDC programming cable and...

$7.50

81 in stock

Premium Female/Female Jumper Wires - 40 x 12" (300mm)

Premium Female/Female Jumper Wires - 40 x 12in (300mm)

Product ID: 793

Product ID: 1606

$6.95

In stock

Large Modular Snap Box for SMD component storage

Product ID: 3891

$1.95

In stock

Small PCB Test Points (100 pack) - White

Product ID: 3824

Testing is an important step in board manufacturing. And it can be super tricky on a fully populated PCB. So how can you test connections when you have an assortment of components blocking your probe? These "mini loop type" Small PCB Test Points easily snap in to your project, and they're ideal for ultra-low profile surface-mount testing! They will attach to J hooks,...

$9.95

7 in stock

Silicone Cover Stranded-Core Wire - 2m 26AWG Black

Product ID: 1881

$0.95

In stock

Top view of a small Altoids breath mint case with two Adafruit Perma-Proto Small Mint Tin Size Breadboard PCBs.

Adafruit Perma-Proto Small Mint Tin Size Breadboard PCB - 3 pack

Product ID: 1214

Making a project that will fit into an "Altoids Smalls" Mint Tin? Or maybe you just need a small amount of prototyping space and a larger breadboard size is too big? Put down that PCB shear and pick up a Perma-Proto in the new exciting shape! Customers have asked us to carry basic perf-board, but we never liked the look of most basic perf: it's always crummy quality,...

$7.95

75 in stock

Adafruit Flex Perma-Proto - Half-sized Breadboard Flex-PCB

Product ID: 1518

Product ID: 5837

These premium extension jumper wires are handy for making wire harnesses or jumpering between headers on PCBs. They're 200mm (~7.8") long and come loose as a pack of 30 (5 pieces of brown, green, orange, white, purple, grey). They have 0.1" socket 'female' header contacts on one end and 0.1" plug 'male' header contacts on the other. These are a great pack to add on...

$9.95

In stock

Scattered pile of Jumper Shunts with Handles

Jumper Shunt with Handle (0.1" / 2.54mm) – 10 Pack

Product ID: 3525

Are you looking to jumper two neighboring male headers (2.54mm apart) without the hassle of maneuvering and re-maneuvering wires? Well then you've jumped to the right page! This pack of ten (10) 2.54mm jumpers is the perfect solution for quick and compact jumpering. They're super handy to have hanging around your work-space, and perfect for when you're prototyping.

$0.95

In stock

DIY HDMI Cable Parts - Right Angle (L Bend) HDMI Plug Adapter

Product ID: 3550

If you love DIY cable-rigging, then these HDMI adapters are right up your alley! Making custom HDMI cables has never been easier. Just grab one of our HDMI ribbon cables, then swap and switch any of our HDMI adapters on each end using the flex cable clips. There are options a-plenty! This version is a right angle (left bend) HDMI plug. Ribbon cable and other adapter...

$6.50

In stock

Mini Solderless Breadboard - 4x4 Points

Product ID: 2463

Add a micro-slice standard solderless breadboard to your Perma-Proto or other perf-board. This 4x4 point solder-less breadboard is a good way to add some solderless prototyping space if you just need to have a couple of points. Comes with one 18mm x 13mm x 10mm piece of solder-less breadboard. There are four white posts on the bottom for PCB positioning, but you can...

$0.95

In stock

Angled shot of 20cm long 12-pin 2.54mm pitch jumper cable.

Product ID: 590

$19.95

In stock

Adafruit Perma-Proto Mint Tin Size Breadboard PCB

Product ID: 723

Making a project that will fit into an "Altoids" Mint Tin? Put down that PCB shear and pick up a Perma-Proto in the new exciting minty shape! Customers have asked us to carry basic perf-board, but we never liked the look of most basic perf: its always crummy quality, with pads that flake off and no labeling. Then we thought about how people actually prototype -...

$5.95

In stock

Product ID: 5434

The Pogo Pin Probe Clip with 2x5 0.05" pitch SWD spacing is a great way to test and connect with pin-point accuracy without soldering! It's sort of like an alligator clip with an array of built-in springy pogo pins - so you can connect to a PCB with classic 'SWD' pad holes, without soldering or a special adapter cable. The clip is constructed from PCB sections, with...

$19.95

23 in stock

Angled shot of 20cm long 16-pin 2.54mm pitch jumper cable.

2.54mm 0.1" Pitch 16-pin Jumper Cable - 20cm long

Product ID: 4944

$1.75

In stock

Angled shot of a single Pogo Pin - Cupped Head.

Pogo Pins "Cupped Head" (10 pack) - P75-A2

Product ID: 2428

Pogo pins are little spring-loaded contacts, very handy for making jigs, or making momentary (but electrically solid) contacts. We use them by the dozen for making programming and testing jigs but they're handy also if say you want to JTAG program a board that you cant solder headers to - just shove these thin contacts into a 0.1" pitch IDC programming cable and...

$4.95

76 in stock

Premium Female/Female Raw Custom Jumper Wires - 40 x 6" (150mm)

Product ID: 3141

Our Raw F/F Jumper Wires are perfect for making custom jumper wire sets for wire harnesses or jumpering between headers on PCB's. These premium jumpers are a little over 6" (150mm) long and come in a 'strip' of 40 (4 pieces of each of the ten colors). The 0.1" spacing raw sockets on either end made to be custom fitted with your choice of housing blocks to meet your...

$2.95

In stock

Silicone Cover Stranded-Core Wire - 2m 30AWG Blue

Product ID: 2002

$0.75

In stock

Silicone Cover Stranded-Core Wire - 25ft 26AWG - Green

Product ID: 2516

$4.95

In stock

Angled shot of 20cm long 9-pin 2.54mm pitch cable.

Product ID: 4100

Connect this to that without soldering using these small alligator clip test leads. 18" long cables with color-coded alligator clips on both ends. You get 6 pieces in 6 unique colors. Strong and grippy, these always come in handy! We often use these in conjunction with a multimeter so we don't have to hold the probes in place. Compared to our large alligator clip...

$2.95

In stock

Silicone Cover Stranded-Core Ribbon Cable - 4 Wires 1 Meter Long - 26AWG Black

Product ID: 3892

$1.95

In stock

Large spool of Rainbow Wire Wrap Thin Prototyping & Repair Wire

Rainbow "Wire Wrap" Thin 30 AWG Prototyping & Repair Wire - 280 meters total - 35m each of 8

Product ID: 4730

This stuff is called "wire-wrap wire" because it used to be used for wire-wrapping high-speed digital circuits on a special kind of contact board. It's pretty rare to see wire-wrapping in these days of low-cost PCB fabrication, but the wire is still really handy for prototyping work. It's extremely thin (30 AWG!), so your wiring won't get bulky, and it is just stiff...

$6.95

In stock

Adafruit Multi-pitch FPC Adapter - 40 Pin 0.5/0.6/0.7/0.8/1.0mm

Product ID: 1436

Product ID: 2004

$0.75

In stock

Ultra-Fine Stranded Wire Spool - 10 meters - 32AWG - Black

Product ID: 4735

Nothing is going to be as thin and flexible as this wire - it feels a little like waxed thread but can carry current! You could use this in wearables or very fine assemblies where weight and bulk is at a premium. Silicone wires are flexible but aren't as thin. Wire-wrapping wire is thin but isn't flexible. The covering for the wire is Teflon so its good from -80 to...

$7.50

72 in stock

DIN Rail mountable RJ-45 To Terminal Block Adapter - Vertical Jack.

DIN Rail RJ-45 To Terminal Block Adapter - Vertical Jack

Product ID: 3798

This one going out to all the makers and designers who use DIN railing in their builds. This adapter plate was recommended by a customer, its perfect for simplifying complex wiring. You connect an RJ45 cable (a.k.a Ethernet) to this very PCB which can be DIN rail-mounted. Then, all 8 wires are broken out into terminal blocks, so you can connect and power your...

$14.95

In stock

DIY HDMI Cable Parts - Right Angle (L Bend) Micro HDMI Plug

Product ID: 3558

If you love DIY cable-rigging, then these HDMI adapters are right up your alley! Making custom HDMI cables has never been easier. Just grab one of our HDMI ribbon cables, then swap and switch any of our HDMI adapters on each end using the flex cable clips. There are options a-plenty! This version is a right angle (L) Micro HDMI plug. Ribbon cable and other adapter...

$6.50

64 in stock

White hand holding a blob of melted Low Temperature Thermoplastic.

Hand-Moldable Plastic - Low Temperature Thermoplastic - 100g Bag

Product ID: 2504

They look a lot like sushi rice, but don't eat 'em - these are Low Temperature Thermoplastic Beads! Also known as "Friendly Plastic", "Instamorph", "Polymorph" and many other names These 100g bags are full of ivory-colored polymorph plastic beads with a low melting point of about 60°C (140°F). Heat up some water with a kettle or microwave, then dump the beads...

$4.95

71 in stock

Top view of five Configurable Spring Terminal Blocks - 3 Pin 0.1"

Configurable Spring Terminal Blocks - 3 Pin 0.1" Pitch R/A - x 5

Product ID: 1074

Spring terminal blocks will simplify your wiring and make your project more rugged. Instead of soldering wires to your perf board, solder in these 0.1" pitch terminal blocks. There's a little spring contact so you can pull back on the plastic bit and slip in your 20 to 26 AWG solid or stranded-core wires. Each terminal block is electrically isolated from those next...

$4.95

80 in stock

Premium Male/Male Raw Jumper Wires - 40 x 6" (150mm)

Product ID: 3142

Our Raw Male/Male Jumper Wires are perfect for making a custom jumper wire sets for wire harnesses or jumpering between headers on PCB's. These premium jumpers are a little over 6" (150mm) long and come in a 'strip' of 40 (4 pieces of each of the ten colors). The 0.1" raw sockets on either end are designed to be custom fitted with your choice of housing blocks to...

$3.95

99 in stock

DIY USB or HDMI Cable Parts - 50 cm Ribbon Cable

Product ID: 3563

$3.50

In stock

Angled shot of 3 different colored wires plugged into the 3-pin wire joint.

3-Pin Wire Joints (3 Pack)

Product ID: 5098

These are the easiest way possible to connect two wires - no if's, and's, or butt's! Well, actually, these are often referred to as wire butts 'cause you 'butt' two wires together (hey we didn't come up with the name!) Butt seriously, folks! OK, so despite the humor, these are really handy. If you want to quickly prototype some wiring, skip the soldering and use...

$1.50

In stock

Bundle of Large Alligator Clip Test Leads

Large Alligator Clip Test Lead (set of 10)

Product ID: 321

Connect this to that without soldering using these handy alligator clip test leads. 20" cables with alligator clip on each end, color coded. You get 10 pieces in 5 colors. Strong and grippy, these always come in handy! We often use these in conjunction with a multimeter so we don't have to hold the probes in place. Compared to our small alligator clip set, these...

$4.95

45 in stock

Premium Male/Male Jumper Wires - 40 x 12" (300mm)

Product ID: 760

Handy for making wire harnesses or jumpering between headers on PCB's. These premium jumper wires are 12" (300mm) long and come in a 'strip' of 40 (4 pieces of each of ten rainbow colors). They have 0.1" male header contacts on either end and fit cleanly next to each other on standard-pitch 0.1" (2.54mm) header. The best part is they come in a 40-pin ribbon cable....

$7.95

In stock

Silicone Cover Stranded-Core Wire - 25ft 26AWG - Yellow

Product ID: 2515

$4.95

66 in stock

5 Blank SMT Storage Pages for 6 strips of 24mm Tape

Blank SMT Storage Pages for 6 strips of 24mm Tape - 5 Pages

Product ID: 2184

These five blank pages are designed for keeping taped parts, specifically for 24mm or smaller tape. Each page has 6 rows or slots that you can slide your tape into. The slots are 75mm / 3" long. These pages are meant for our Blank SMT Storage Book. We also carry pages for 8mm tape.

$2.50

1 in stock

DIY HDMI Cable Parts - Straight HDMI Socket Adapter

Product ID: 3551

If you love DIY cable-rigging, then these HDMI adapters are right up your alley! Making custom HDMI cables has never been easier. Just grab one of our HDMI ribbon cables, then swap and switch any of our HDMI adapters on each end using the flex cable clips. There are options a-plenty! This version is a straight HDMI socket. Ribbon cable and other adapter not included!...

$6.50

In stock

Blank SMT Storage Pages for 12 strips of 8mm Tape - 5 Pages

Product ID: 2183

These five blank pages are designed for keeping taped parts, specifically for 8mm tape (the most common size of tape by far). Each page has 12 rows or slots that you can slide your tape into. The slots are 3.5" long. These pages are meant for our Blank SMT Storage Book. We also carry pages for 24mm tape (or smaller).

$2.50

30 in stock

SMT Socket for Wide SOIC-16, with chip installed

SMT Socket - Wide SOIC-16

Product ID: 4727

This socket is good for any SOIC/SOP Wide-body 16 pin chip in a 300mil wide body. Simply flip open the latch, insert the chip, and flip down the latch to secure it in place. The chip is held securely against gold 'fingers' (no, stop, Mr. Bond! It's not that Goldfinger!) in the socket. The bottom footprint matches the same SOIC footprint so you can solder this onto an...

$6.95

In stock

A coiled Silicone Cover Stranded-Core Ribbon Cable - 4 Wires 1 Meter Long

Silicone Cover Stranded-Core Ribbon Cable - 4 Wires 1 Meter Long - 30 AWG Black

Product ID: 3889

$1.95

55 in stock

Gray Silicone Cover Stranded-Core Wire - 2m 26AWG

Silicone Cover Stranded-Core Wire - 2m 26AWG Gray

Product ID: 1884

$0.95

32 in stock

DiMeCard 8 microSD Card Holder

Product ID: 3664

Mary Poppins had her TARDIS-like carpet bag. 90s kids had their Pokémon card binders. But we have the next best thing: DiMeCard, a super-slim 8-piece microSD storage card. The most useful thing you didn't know you needed. If you're working with single board computers like the Raspberry Pi or BeagleBone - or maybe you're doing a lot of datalogging or...

$4.95

In stock

Solid-Core Wire Spool - 25ft - 22AWG - Yellow

Product ID: 289

$2.95

In stock

Ultra-Fine Stranded Wire Spool - 10 meters - 36AWG - Black

Product ID: 4733

$7.50

In stock

5 pack of Tiny Modular Snap Boxes for SMD component storage

Modular Snap Boxes - SMD component storage - 5 pack

Product ID: 430

$6.95

In stock

Collection of many Small Dual Row Wire Housing Packs

Small Dual Row Wire Housing Pack for DIY Jumper Cables

Product ID: 3143

Are you frustrated by the lack of customization options for your jumper wires? Look no further! Compatible with both male and female wires, these fully customizable wire housings bring DIY to a new level, giving you near limitless options when using jumper wires in your project. This is a pack of small, dual row housings. We also offer other packs including single...

$1.95

In stock

Product ID: 1377

Beguiled by a fancy new chip that is only available in a QFP or QFN pinout? This breakout PCB set will make your life much much easier and get you prototyping faster than ever. One side has a 48-QFP pin out with traces going to two rows of 0.1" spaced holes; the other has 48-QFN (7mm body). Solder your chip to either side, and you're ready to rock on any solderless...

$5.95

In stock

Top view of five Configurable Spring Terminal Blocks - 3 Pin 0.1" Pitch.

Configurable Spring Terminal Blocks - 3 Pin 0.1" Pitch x 5

Product ID: 1081

$4.95

54 in stock

Small PCB Test Points (100 pack) - Red

Product ID: 3825

$9.95

In stock

Angled shot of 20cm long 18-pin 2.54mm pitch jumper cable.

2.54mm 0.1" Pitch 18-pin Jumper Cable - 20cm long

Product ID: 4945

$1.75

In stock

Angled shot of JST PH 4-pin Plug to Color Coded Alligator Clips Cable.

JST PH 2mm 4-pin Plug to Color Coded Alligator Clips Cable

Product ID: 4029

This cable will let you turn a JST PH 4-pin cable port into 4 individual wires with grippy mini alligator clips. We're carrying these to match up with any of our boards or breakouts with 'STEMMA' connectors on them such as the HalloWing or NeoTrellis M4. Can also be used with any STEMMA breakouts! This cable has a JST PH 4-pin on one side and alligator clips on the...

$2.50

In stock

Solid-Core Wire Spool - 25ft - 22AWG - Blue

Product ID: 2989

$2.95

62 in stock

Silicone Cover Stranded-Core Wire - 25ft 26AWG - Orange

Product ID: 2520

$4.95

23 in stock

Circuit Playground Proto Gizmo - Bolt-on Perma-Proto

Product ID: 4320

Extend and expand your Circuit Playground projects with a bolt-on Perma-Proto that lets you connect solderable circuits in a sturdy and reliable fashion. This PCB looks just like a solderless breadboard but has permanently affixed M3 standoffs that act as mechanical and electrical connections. Solder to the gold-plated traces to create your custom invention! Each pad...

$7.95

66 in stock

Silicone Cover Stranded-Core Wire - 50ft 30AWG Blue

Product ID: 3166

$4.95

In stock

Bi-Fold Compartment Parts Box

Product ID: 796

We looked long and hard for a high-quality, sturdy, durable-latching parts box and we have it! This handy box has outer dimensions of 6.25" x 3.5" (159mm x 89mm) - 4.1" including hinges (104mm), long compartments are 3.35" x 1.15" (85 x 29mm) and for short compartments are 1.65" x 1.15" (42 x 29mm). Perfect for small parts and more! We tested dozens of other latching...

$3.95

85 in stock

DIY HDMI Cable Parts - Right Angle (R Bend) Micro HDMI Plug

Product ID: 3557

$6.50

In stock

26 pin IDC Breakout Helper Soldered into perma-proto.

IDC Breakout Helper - 2x13 (26 pin)

Product ID: 2101

The "poor woman's" Raspberry Pi cobbler! This combo of 2x13 pin (0.1 spaced) header and socket is for our popular GPIO Ribbon Cable for Raspberry Pi Model A and B. It comes in two parts, a 'pin-through' socket and a male header. The socket straddles the center of a breadboard or Perma-Proto and then header plugs into the top of the socket. Since IDC cables are so...

$1.75

6 in stock

Angled shot of a single Pogo Pin - Crown Head.

Pogo Pins "Crown Head" (10 pack) - P75-H2

Product ID: 2429

Pogo pins are little spring-loaded contacts, very handy for making jigs, or making momentary (but electrically solid) contacts. We use them by the dozen for making programming and testing jigs but they're handy also if say you want to JTAG program a board that you cant solder headers to - just shove these thin contacts into a 0.1" pitch IDC programming cable and...

$4.95

64 in stock

Silicone Cover Stranded-Core Wire - 2m 26AWG Green

Product ID: 1880

$0.95

In stock

Silicone Cover Stranded-Core Wire - 25ft 26AWG - Blue

Product ID: 2514

$4.95

22 in stock

SMT/SMD 0805 Size Resistor and Capacitor Book

SMT/SMD 0805 Resistor and Capacitor Book - 3725 pieces

Product ID: 441

Always have the right SMT components at your hand with this awesome 0805 Resistor and Capacitor book set! This book has nice translucent pages filled with cut tape SMT 0805 components, sorted, labeled and ready to go. This book has 63 5% resistor values, 3025 parts and 17 capacitor values, 700 parts. The nice thing is that you get a good distribution of the...

$39.95

79 in stock

DIN Rail Mount Bracket for Raspberry Pi, BeagleBone or Arduino. With Raspberry Pi installed

DIN Rail Mount Bracket for Raspberry Pi / BeagleBone / Arduino

Product ID: 4557

This one's going out to all the makers and designers who use DIN railing in their builds. This adapter plate is perfect for simplifying complex wiring. It's pretty neat and compatible with a slew of microcontrollers and microcomputers: Raspberry Pi (any modern ones with 4 mounting holes such as the Zero, Pi 4, etc), Adafruit Metro or Arduino Uno, Adafruit Grand...

$19.95

In stock

DIN Rail mountable RJ-45 To Terminal Block Adapter - Right Angle Jack.

DIN Rail RJ-45 To Terminal Block Adapter - Right Angle Jack

Product ID: 3797

$14.95

80 in stock

DIN Rail 2x20 IDC to Terminal Block Adapter Breakout

Product ID: 4437

This one's going out to all the makers and designers who use DIN railing in their builds. This adapter plate is perfect for simplifying complex wiring. You connect a 2x20 IDC cable to this very PCB, which can be DIN rail-mounted. Then, all 40 pins are broken out into terminal blocks, so you can connect and power your sensors, displays, microcontrollers, etc. No...

$13.95

46 in stock

Silicone Cover Stranded-Core Wire - 2m 26AWG Yellow

Product ID: 1879

$0.95

57 in stock

DIY HDMI Cable Parts - Straight Micro HDMI Socket Adapter

Product ID: 3559

If you love DIY cable-rigging, then these HDMI adapters are right up your alley! Making custom HDMI cables has never been easier. Just grab one of our HDMI ribbon cables, then swap and switch any of our HDMI adapters on each end using the flex cable clips. There are options a-plenty! This version is a straight Micro HDMI socket. Ribbon cable and other adapter not...

$6.50

33 in stock

Flexible Protoboard - 20cm x 30cm

Product ID: 3904

Make your next project super-flexy with a biiiig prototyping board that can twist and shout– err, twist and bend! This passive flexible proto-PCB is about large as a piece of paper, but instead of dead trees it's made of very thin FR4. We're not bending the truth! This protoboard is only 0.4mm thick, so it's extremely bendable and you can cut it easily with...

$12.50

61 in stock

Collection of many Large Single Row Wire Housing Packs

Large Single Row Housing Pack for DIY Jumper Cables

Product ID: 3146

Are you frustrated by the lack of customization options for your jumper wires? Look no further! Compatible with both male and female wires, these fully customizable wire housings bring DIY to a new level, giving you near limitless options when using jumper wires in your project. This is a pack of large, single row housings. We also offer other packs including single...

$2.95

27 in stock

Cold 2-Wire Splice with two wires coming out

Cold 2-Wire Splice (UY) - 10 pack

Product ID: 1496

$2.95

5 in stock

Top shot of Blue Silicone Cover Stranded wire

Silicone Cover Stranded-Core Wire - 2m 26AWG Blue

Product ID: 1878

$0.95

In stock

DIN Rail Terminal Block Adapter to Metro or Arduino mounted onto DIN rail

DIN Rail Terminal Block Adapter to Metro or Arduino Uno

Product ID: 4556

This one's going out to all the makers and designers who use DIN railing in their builds. This adapter plate is perfect for simplifying complex wiring. You connect an Arduino Uno or Adafruit Metro to this breakout PCB, which can be DIN rail-mounted. All wires are broken out into terminal blocks, so you can connect and power your sensors, displays, microcontrollers,...

$34.95

53 in stock

Angled shot of tube of electronic paint.

Bare Conductive Paint Pen - 10mL

Product ID: 1306

Bare Conductive Paint is a multipurpose electrically conductive material perfect for all of your DIY projects! Bare Paint is water based, nontoxic and dries at room temperature. Bare Paint is the first non-toxic electrically conductive paint available to consumers today. This unique child-friendly material is designed for people of all ages to explore and learn about...

$12.50

18 in stock

Solid-Core Wire Spool - 25ft - 22AWG - White

Product ID: 2984

$2.95

95 in stock

Silicone Cover Stranded-Core Wire - 25ft 26AWG - White

Product ID: 2518

$4.95

58 in stock

Small PCB Test Points (100 pack) - Black

Product ID: 3823

$14.95

1 in stock

Ultra-Fine Stranded Wire Spool - 10 meters - 30AWG - Black

Product ID: 4736

$7.50

48 in stock

Silicone Cover Stranded-Core Wire - 25ft 26AWG - Gray

Product ID: 2519

$4.95

29 in stock

SMT 0603 Size Resistor and Capacitor Book

SMT 0603 Resistor and Capacitor Book - 3725 pieces

Product ID: 442

Always have the right SMT components at your hand with this awesome 0603 Resistor and Capacitor book set! This book has nice translucent pages filled with cut tape 0603 SMT components, sorted, labeled and ready to go. This book has 63 5% resistor values, 3025 parts and 17 capacitor values, 700 parts. The nice thing is that you get a good distribution of the...

$39.95

43 in stock

A pair of tweezers holding a microchip hovers over the SMT Breakout PCB for SOIC-12 or TSSOP-12.

SMT Breakout PCB for SOIC-12 or TSSOP-12 - 6 Pack!

Product ID: 1211

Beguiled by a fancy new chip that is only available in a SOIC or (T)SSOP pinout? This breakout PCB set will make your life much much easier and get you prototyping faster than ever. One side has a 12-TSSOP pin out with traces going to two rows of 0.1" spaced holes; the other has 12-SOIC. Solder your chip to either side, and you're ready to rock on any solderless...

$4.95

In stock

Copper Foil Tape with Conductive Adhesive - 25mm x 15 meter roll

Product ID: 1127

Copper tape can be an interesting addition to your toolbox. The tape itself is made of thin pure copper so its extremely flexible and can take on nearly any shape. You can easily solder to it, and the tape itself can carry current just like a wire. On the back is an electrically conductive adhesive. The adhesive can't carry significant current but it is very handy...

$19.95

92 in stock

Stranded-Core Wire Spool - 25ft - 22AWG - Red

Product ID: 3068

$2.95

54 in stock

SMT Socket Header Kit for FeatherWings

Product ID: 4743

These two SMT Socket Headers alone are, well, lonely. But pair them with any of our Feather boards and you're in business! These headers are particularly cute and slim and are designed to match with FeatherWings. It's harder to solder than thru-hole type headers, but for reflow-friendly builds these headers are recommended! We use these on all types of 'Wings, from...

$2.95

In stock

open Conductive Silver Ink Pen with Micro Tip

Conductive Silver Ink Pen - Micro Tip - CW2200MTP

Product ID: 515

Experiment with paper electronics with this silver conductive ink pen that will let you draw traces! We like the make of this pen, it has a nice liquid silver ink that flows easily, and it works great. In just 3 minutes from opening the packaging, we made the image above, a coin cell holder with an LED. There are two 'tips' available - standard and micro. The...

$59.95

15 in stock

Angle shot of Test Socket - SOIC-16 Narrow Breakout with soldered on header.

SMT Test Socket - SOIC-16 Narrow Breakout

Product ID: 1283

You know those ZIF sockets we have for DIP chips? Well these are just like that but for SMT parts! Yeah, that's right, now you can program and test out your favorite new parts in SOIC-16 or smaller packages. This test socket is good for any SOIC/SOP "Narrow" chip in a 150mil wide body that has 16 pins or fewer. Simply press down on the top, place the chip in...

$19.95

17 in stock

Orange Silicone Cover Stranded-Core Wire

Silicone Cover Stranded-Core Wire - 2m 26AWG Orange

Product ID: 1883

$0.95

74 in stock

Angled shot of DIN Rail 6x6 to Terminal Block Adapter on a DIN rail.

DIN Rail Dual 1x6 to Terminal Block Adapter

Product ID: 5246

This one's going out to all the makers and designers who use DIN railing in their builds. This adapter plate is perfect for simplifying complex power supply wiring. There's two spring-terminal blocks on one side of the PCB, and a 2x6 set of connected blocks on the other. As you may expect, the positive marked terminal blocks are all connected together, as are the...

$16.95

51 in stock

Angled shot of SMT Test Socket - TQFP-28 Breakout.

SMT Test Socket - TSSOP-28 Breakout

Product ID: 1280

You know those ZIF sockets we have for DIP chips? Well these are just like that but for SMT parts! Yeah, that's right, now you can program and test out your favorite new parts in TSSOP packages. This test sockets is good for any 4.4mm / 0.147" wide TSSOP/SSOP with up to 28 pins. Simply press down on the top, place the chip in carefully and then release to latch the...

$49.95

9 in stock

Angle shot of Test Socket - SOIC-8 Narrow Breakout with soldered on header.

SMT Test Socket - SOIC-8 Narrow Breakout

Product ID: 1284

You know those ZIF sockets we have for DIP chips? Well these are just like that but for SMT parts! Yeah, that's right, now you can program and test out your favorite new parts in SOIC-8 packages. This test socket is good for any SOIC/SOP "Narrow" 8 pin chip in a 150mil wide body. Simply press down on the top, place the chip in carefully and then release to latch the...

$14.95

54 in stock

Solid-Core Wire Spool - 25ft - 22AWG - Gray

Product ID: 2983

$2.95

16 in stock

32 Pin IDC Breakout Helper Soldered into perma-proto

IDC Breakout Helper - 2x16 (32 pin)

Product ID: 2103

This 2x16 (32 pin - 0.1 spaced) IDC Breadboard Helper is great in conjunction with any 32-pin IDC cables. It comes in two parts, a 'pin-through' socket and a male header. The socket straddles the center of a breadboard or Perma-Proto and then header plugs into the top of the socket. Since IDC cables are so standard, but a royal pain to use with breadboards, this is a...

$1.95

2 in stock

DIY HDMI Cable Parts - Right Angle (L Bend) Mini HDMI Plug

Product ID: 3554

If you love DIY cable-rigging, then these HDMI adapters are right up your alley! Making custom HDMI cables has never been easier. Just grab one of our HDMI ribbon cables, then swap and switch any of our HDMI adapters on each end using the flex cable clips. There are options a-plenty! This version is a right angle (left bend) Mini HDMI plug. Ribbon cable and other...

$6.50

In stock

Collection of many Large Dual Row Wire Housing Packs

Large Dual Row Wire Housing Pack for DIY Jumper Cables

Product ID: 3144

Are you frustrated by the lack of customization options for your jumper wires? Look no further! Compatible with both male and female wires, these fully customizable wire housings bring DIY to a new level, giving you near limitless options when using jumper wires in your project. This is a pack of large, dual row housings. We also offer other packs including single...

$3.95

25 in stock

Stranded-Core Wire Spool - 25ft - 22AWG - White

Product ID: 2997

$2.95

46 in stock

SMT Test Socket - SOIC-28 Wide Breakout

Product ID: 1281

You know those ZIF sockets we have for DIP chips? Well these are just like that but for SMT parts! Yeah, that's right, now you can program and test out your favorite new parts in SOIC Wide packages. This test sockets is good for any wide (300 mil) SOIC/SOP with up to 28 pins. Simply open the latch, place the chip in carefully and then close the top over it. The chip...

$29.95

23 in stock

Stranded-Core Wire Spool - 25ft - 22AWG - Yellow

Product ID: 2987

$2.95

24 in stock

DIY HDMI Cable Parts - Straight Mini HDMI Socket Adapter

Product ID: 3555

If you love DIY cable-rigging, then these HDMI adapters are right up your alley! Making custom HDMI cables has never been easier. Just grab one of our HDMI ribbon cables, then swap and switch any of our HDMI adapters on each end using the flex cable clips. There are options a-plenty! This version is a straight Mini HDMI socket. Ribbon cable and other adapter not...

$6.50

In stock

DIN Rail 2x8 IDC to Terminal Block Adapter Breakout

Product ID: 4436

This one's going out to all the makers and designers who use DIN railing in their builds. This adapter plate is perfect for simplifying complex wiring. You connect a 2x8 IDC cable to this very PCB, which can be DIN rail-mounted. Then, all 16 pins are broken out into terminal blocks, so you can connect and power your sensors, displays, microcontrollers, etc. No...

$7.95

62 in stock

DIY USB or HDMI Cable Parts - 100 cm Ribbon Cable

Product ID: 3564

$9.95

73 in stock

Handsome tote with handle and many storage boxes inside

Large Double-Sided Storage Tote Box

Product ID: 1149

This tote is "totes awesome" - plenty large with lots of storage, double sided design, solid clips, clear tops and a pleasing, easy to carry shape. We love this tote for storing all of our goodies and keeping them safe from home to the studio to the workshop. One side has little 'cups' that can be removed. The other side has the classic divider system. Outside...

$24.95

15 in stock

SMT Test Socket - TQFP-32 Breakout

Product ID: 1240

You know those ZIF sockets we have for DIP chips? Well these are just like that but for SMT parts! Yeah, that's right, now you can program and test out your favorite new parts in TQFP-32 packages. This test sockets is good for any QFP-32 in a 7mm square body. Simply open the latch, place the chip in carefully and then close the top over it. The chip is held securely...

$49.95

6 in stock

A pair of tweezers holding a microchip hovers over the SMT Breakout PCB for 44-QFN or 44-TQFP placement on a long blue rectangular breakout board.

SMT Breakout PCB for 44-QFN or 44-TQFP - 3 Pack!

Product ID: 1162

Beguiled by a fancy new chip that is only available in a QFP or QFN pinout? This breakout PCB set will make your life much much easier and get you prototyping faster than ever. One side has a 44-QFP pin out with traces going to two rows of 0.1" spaced holes; the other has 44-QFN. Solder your chip to either side. and you're ready to rock on any solderless breadboard....

$5.95

43 in stock

DIN Rail 10x10 to Terminal Block Adapter

Product ID: 5245

This one's going out to all the makers and designers who use DIN railing in their builds. This adapter plate is perfect for simplifying complex wiring. There are 10 spring-terminal blocks on either side of the PCB, and they are connected straight through. Use stranded or solid-core wires, they can be signal or power wires. And of course, you can fit a few wires per...

$17.95

In stock

LOOMIA Prototyping Packs & Parts - Quick-Start Pack

Product ID: 4825

Circuit boards power the world but are built for hard goods. LOOMIA makes a new form-factor of circuit—a soft circuit (e-textile) system—that can be used to power soft goods. From automotive to apparel, our soft circuit systems can be used when standard PCBs (Printed Circuit Boards) aren't up to the task—bringing heating, lighting, and sensing to...

$189.00

2 in stock

Angle shot of Test Socket - TSSOP-16 with soldered on header.

SMT Test Socket - TSSOP-16

Product ID: 1795

You know those ZIF sockets we have for DIP chips? Well these are just like that but for SMT parts! Yeah, that's right, now you can program and test out your favorite new parts in TSSOP packages. This test sockets is good for any 4.4mm / 0.147" wide TSSOP/SSOP with up to 20 pins. Simply press down on the top, place the chip in carefully and then release to latch the...

$34.95

64 in stock

Notify Me

$5.95

Out of stock

Notify Me

Overhead shot of 10x10 aluminum prototyping grid with a microcontroller and three breakout boards.

Product ID: 1305

Notify Me

$34.95

Out of stock

Notify Me

Angled shot of black SMD storage box opened up.

AideTek Box-All 144 Compartment ESD-Safe SMD Component Storage

Product ID: 5243

For storing small parts (especially SMT/SMD components), this heavy-duty Large AideTek Box-All ESD-Safe Modular Box is ideal. It has 144 individual clear pop-open covers, so you can keep only the ones you want open - less risk of mixing up parts or having a tragic spill. Each wee compartment measures 0.72" (H) x 0.657" (W) x 0.4"(D) or 18.3mm (H) x 16.7mm (W) x...

Notify Me

$44.95

Out of stock

Notify Me

Overhead shot of electronics kit contents.

Parts Bundle for Beginning Breadboarding by Jen Fox

Product ID: 5696

We are very excited to carry a new bundle supporting Adafruit friend and maker Jen Fox and her new book, Beginning Breadboarding: Physical Computing and the Basic Building Blocks of Computers! Using fun, hands-on projects, learn what a circuit is and how it works! This book uses a common tool in electronics, the breadboard, to build your way to an understanding of...

Notify Me

$39.95

Out of stock

Notify Me

Angled shot of an assembled Adafruit Perma-Proto 40-Pin Raspberry Pi Half-Size PCB with Raspberry Pi computer.

Adafruit Perma-Proto 40-Pin Raspberry Pi Half-Size PCB Kit - with 2x20 Header

Product ID: 4353

We put a PermaProto half-sized proto board in a blender with a Pi Cobbler and out emerged this very tasty confection - the 40-Pin PermaProto for Pi! It has the Cobbler baked right in. Simply solder the 2x20 box header in, and you get all the labeled breakouts with extra prototyping space, power rails, mounting holes and that gorgeous silk. This version is for modern...

Notify Me

$5.95

Out of stock

Notify Me

Annotated diagram of 4 different wire gauges

Ultra-Fine Stranded Wire Spool - 10 meters - Various AWG - Black

Product ID: 4766

More Info

In stock

More Info

Four coils of different width ribbon wires

Silicone Covered Ribbon Cables

Product ID: 3927

For those who are fans of our silicone-covered wires, but are always looking to up their wiring game. We now have Silicone Cover Ribbon Cables! These may look a lot like squid ink noodles, but they're not. The silicone-sheathed wire is super-flexible and soft, and it's also strong! Able to handle up to 200°C and up to 600V, it will do when PVC covered wire wimps...

More Info

In stock

More Info

Top view of several different kinds of 2.54mm pitch Molex PicoBlades as jumper wires.

2.54mm 0.1" Pitch Jumper Cables in Various Widths - 20cm long

Product ID: 5070

More Info

In stock

More Info

Angled shot of ten 13" long colorful alligator test clips.

Colorful Clips - Tropical Alligator Test Clip Leads - 10 Pieces - 13" long

Product ID: 5152

Designed by Making & Hacking extraordinaire Lee Cyborg, these colorful clips are a nice switch-up from the standard colors. Connect this to that without soldering using these Hot GitHub Summer alligator clip test leads that look perfect for a beachfront environmental-sensing project. 13" long cables with alligator clips on each end, color-coded. You get 10 pieces...

Notify Me

$20.00

Out of stock

Notify Me

Top view of four piles of four differently sized Universal Proto-Board PCBs.

Universal Proto-board PCBs in Various Sizes - 3 Packs

Product ID: 4858

Here are a variety of handy 3-pack of Proto-board PCBs in Adafruit Black. Both sides have a black silkscreen with some row/column markings. Note that these don't have any traces between the PCB holes, you would normally bend over a thru-hole lead to create connections. They're also good for just plain mechanical work because they are made of strong FR4 There are also...

More Info

In stock

More Info

Silicone Cover Stranded-Core Wire - 26AWG in Various Colors

Product ID: 1970

Silicone-sheathing wire is super-flexible and soft, and it's also strong! Able to handle up to 200°C and up to 600V, it will do when PVC covered wire wimps out. We like this wire for being extremely supple and flexible, so it is great for wearables or projects where the wire-harness has to be able to deal with a lot of bending. Comes with 2m of black, red, blue,...

More Info

In stock

More Info

Silicone Cover Stranded-Core Wire - 30AWG in Various Colors

Product ID: 2051

In stock

Product ID: 2981

Discontinued

Product ID: 1136

Discontinued - you can grab PS/2 Wired Connector - Panel Mount MiniDIN-6 instead! The E1115 PS/2 Keyboard to ASCII Converter is a single chip solution dedicated to producing a single TTL ASCII character on the "press" of a keystroke. It is designed to offload the process intensive complex keyboard decoding of PS/2, allowing the host microcontroller to better allocate...

More Info

Discontinued

More Info