In stock

Angled shot of STEMMA JST PH 3-Pin to Male Header Cable - 200mm.

STEMMA JST PH 2mm 3-Pin to Male Header Cable - 200mm

Product ID: 3893

This cable will let you turn a JST PH 3-pin cable port into 3 individual wires with high-quality 0.1" male header plugs on the end. We're carrying these to match up with our Hallowing, for extending and connecting sensors or LEDs - and the wires are even color coded! We also stock a version with female socket headers on the end For more information about JST PH...

$1.25

In stock

Premium Female/Male 'Extension' Jumper Wires - 20 x 6"

Product ID: 1954

These Female/Male Extension jumper wires are handy for making wire harnesses or jumpering between headers on PCB's. These premium jumper wires are 6" (150mm) long and come in a 'strip' of 20 (2 pieces of each of ten rainbow colors). They have 0.1" male header contacts on one end and 0.1" female header contacts on the other. They fit cleanly next to each other on...

$1.95

In stock

Angled shot of an assembled USB DIY Connector Shell with a Type A Male Plug. The male plug faces the camera at an angle.

Product ID: 1388

$0.95

In stock

Angled shot of STEMMA JST PH 4-Pin to Female Header Cable - 200mm.

JST PH 2mm 4-Pin to Female Socket Cable - I2C STEMMA Cable - 200mm

Product ID: 3950

This cable will let you turn a JST PH 4-pin cable port into 4 individual wires with high-quality 0.1" female sockets on the end. We're carrying these to match up with any of our boards with 'STEMMA' connectors on them such as the Hallowing or Trellis M4. Can also be used with any STEMMA breakouts! This one has socket pins, so it could be used to connet to wires or...

$1.50

In stock

Panel Mount Extension USB Cable - Micro B Male to Micro B Female

Product ID: 3258

Check out this handy MicroUSB extension cable, which will make it easy for you to enclose a device that has a B type (micro USB host) port. Great if you need to extend the USB port for your Raspberry Pi, Arduino, Feather or really anything development board. This Micro-B male/female extension cable features a male USB Micro-B plug on one end, and a bulkhead mountable...

$4.95

In stock

Molex PicoBlade 2-pin Cable - 200mm

Product ID: 3922

When 0.1" is too big, and JST PH's too chunky, the ultra-slim "PicoBlade" is a reliable alternative. These are only 1.25mm pitch, but have a nice clicky connection. This cable is nice and long, 200mm in fact. It's got both small form factor (won't take up a lot of real estate on your PCB) and friction lock to make easy-breezy connections to your HalloWing or anything...

$0.95

In stock

Angled shot of 2-pin cable matching pair.

2.5mm Pitch 2-pin Cable Matching Pair - JST XH compatible

Product ID: 4872

These solid 2.5mm pitch connector cable pairs are great when you need something that can carry a couple amps of current, easy to connect and disconnect, and is just-about 0.1" pitch compatible. These cables are nice and long, 20 cm each, in fact. They've got both small form factor and are a matching set, with an inline socket and plug connector. The two friction lock...

$0.95

In stock

Angled shot of 20cm long 2-pin 2.54mm pitch cable.

Product ID: 4170

Connect this to that! If you want to bridge those contacts out onto another PCB, you'll want this GPIO Ribbon Cable! Comes in a classic Adafruit Black, has a nice soft flexible 16-line 0.05" ribbon cable and keyed IDC connectors on both ends. It's perfect for use with our GPIO Expander bonnet or with any of our RGB LED Matrices if you want to chain them together or...

$1.95

In stock

1.25mm Pitch 4-pin Cable Matching Pair - 40cm long - Molex PicoBlade Compatible

Product ID: 4722

$0.95

In stock

1.25mm Pitch 3-pin Cable Matching Pair - 40cm long - Molex PicoBlade Compatible

Product ID: 4721

$0.95

In stock

RP-SMA to uFL/u.FL/IPX/IPEX RF Adapter Cable

Product ID: 852

$3.95

In stock

Angled shot of 1.25mm pitch 5-pin 20cm long cable.

Product ID: 4876

$1.25

In stock

Right Angle USB Type C Adapter - USB 3.1 Gen 4 Compatible

Product ID: 4432

As technology changes and adapts, so does Adafruit, and speaking of adapting, this right angle adapter is USB C socket-to-plug. USB C is the latest industry-standard connector for transmitting data and power. Like Lightning and MagSafe cables, USB C has no up or down orientation. And who among us has inserted USB A correctly the first time? Works great with any...

$3.95

In stock

Angled shot of JST PH 3-pin Plug to Color Coded Alligator Clips Cable.

JST PH 2mm 3-pin Plug to Color Coded Alligator Clips Cable

Product ID: 4030

Product ID: 5520

Some days we're feeling extra fancy here at the 'fruit warehouse, and we have a big soft spot for woven fabric cables. Like, peep this fully reversible pink/purple Blinka-inspired cable or this mithril-like 3-in-1 Sync and Charge cable. Our latest addition to the collection is this 1 meter long Black Magnetic USB A or USB C to USB C Cable with a Magnetic Type C tip!...

$13.95

99 in stock

Angled shot of 20cm long 3-pin 2.54mm pitch jumper cable.

2.54mm 0.1" Pitch 3-pin Jumper Cable - 20cm long

Product ID: 4935

$0.75

In stock

Angled shot of two 20cm long 6-pin matching cables almost connected.

1.25mm Pitch 6-pin Cable Matching Pair - 10 cm long - Molex PicoBlade Compatible

Product ID: 4986

These solid 1.25mm pitch connector cable pairs are great when you need something that can carry a couple amps of current and are easy to connect and disconnect. These cables are nice and long, 10cm each, in fact. They've got both small form-factor and are a matching set, with an inline socket and plug connector. The two friction lock to make easy-breezy connections...

$0.95

In stock

Angled shot of short skinny Ethernet cable.

Skinny Ethernet LAN UTP CAT6 Cable - 3mm diameter - 30cm long

Product ID: 5443

When you want a super skinny Ethernet / CAT-6 cable, this noodle-y UTP jumper is only 3mm thick at the center so that it can flex around enclosures easily. This cable is 30cm long, about one imperial foot, comes in Adafruit black. CAT6 means it's great for Ethernet-based LANs and other data networks. UTP means the wires are unshielded - much thinner but not great for...

$2.50

In stock

Angled shot of power serial add-on board.

Adafruit PiUART - USB Console and Power Add-on for Raspberry Pi

Product ID: 3589

Here's another super handy add-on for your Raspberry Pi computer, perfect for 'head-less' setups! The PiUART adds a USB Type-C to serial connection so you can use any serial port software to connect to the Pi's console. It plugs in and is fast and easy to add whenever you need to connect to your Pi. Two LEDs connect to RX and TX on the serial converter chip so you...

$6.95

In stock

These solid 1.25mm pitch connector cable pairs are great when you need something that can carry a couple of amps of current and are easy to connect and disconnect. These cables are nice and long, 10cm each, in fact. They've got both small form-factor and are a matching set, with an inline socket and plug connector. The two friction lock to make easy-breezy...

$1.25

In stock

Angled shot of 20cm long 10-pin 2.54mm pitch jumper cable.

Product ID: 3562

$2.75

In stock

Snap-In Panel Mount HDMI Cable - 30cm

Product ID: 4054

This panel mount cable will allow you to enclose a device that has an HDMI port. Perfect for placing your project in a secure box. Both ends have HDMI connectors, an extension cord if you will. What's special about this, you ask? It's a Snap-In Panel Mount Cable - much easier than a classic panel mount cables, you don't need screws or drills for installation. Cut out...

$7.95

In stock

Panel Mount Cable USB C to Type A - 30cm

Product ID: 4053

This panel mount cable will allow you to enclose a device that has a USB A port, and also converts it to a modern USB C connector at the same time. Perfect for placing your project in a secure box! One end is a USB Type A plug connector, and other is a USB C socket with special over-molding. The socket side has two mounting 'ears' with M3 screws installed 20mm apart....

$4.95

In stock

USB A Round Panel Mount Plug showing front port

USB A Jack to Micro USB B Jack Round Panel Mount Adapter

Product ID: 4214

If you need to add a panel-mount connection for Micro USB, but don't have the time or ability to cut a custom oval or square hole, this USB A Jack to Micro USB B Jack Round Panel Mount Plug is the easiest and fastest way to panel-ify your existing kit. It's about 30mm in diameter, so you can drill a hole in your wood, plastic or metal with a common hole-saw or bit,...

$5.95

In stock

Angled shot of USB Straight Type C adapter PCB.

DIY USB Cable Parts - Straight Type C Plug

Product ID: 4108

If you love DIY cable-rigging, then these USB adapters are right up your alley! Making custom USB cables has never been easier. Just grab one of our ribbon cables, then swap and switch any of our USB adapters on each end using the flex cable clips. There are options a-plenty! This version is a Straight USB Type C Male Plug only. Ribbon cable and other adapter not...

$4.95

In stock

Angled shot of 20cm long 1.25mm pitch 8-pin cable.

1.25mm Pitch 8-pin Cable 20cm long 1:1 Cable - Molex PicoBlade Compatible

Product ID: 4928

$1.25

In stock

Angled shot of 20cm long 20-pin 2.54mm pitch jumper cable.

2.54mm 0.1" Pitch 20-pin Jumper Cable - 20cm long

Product ID: 4946

$1.95

In stock

10-pin Socket/Socket IDC cable - 6"

Product ID: 370

Connect this to that with an IDC cable! This cable has 10 pins (2x5) in 0.1"x0.1" spacing. Often used for programming AVRs. 6" long with two sockets crimped onto either side, they're quite sturdy!

$2.00

41 in stock

USB C to USB C Cable - USB 3.1 Gen 4 with E-Mark - 6" long

Product ID: 4198

$8.50

In stock

Angled shot of two 2.0mm pitch 4-pin JST PH matching cable pairs. The cables are not connected.

2.0mm Pitch 4-pin Cable Matching Pair - JST PH Compatible

Product ID: 5088

$0.95

In stock

USB to 5.5mm DC Cable with Booster module

USB to 5.5mm / 2.1mm DC Booster Cable - 12V Output

Product ID: 2778

This cable is kinda fascinating - it has an integrated boost converter, so you can plug it into any USB port (from a computer, battery pack, etc) and it will give you a higher DC voltage! It's a handy way to power 12V powered devices with a center-positive DC barrel jack from a USB port. We also have a version that provides 9V, and if you just need a passthough...

$6.50

In stock

Angled shot of 1.25mm pitch 20cm long 4-pin cable.

Product ID: 4942

$1.50

In stock

USB A/Micro Cable - 2m

Product ID: 2185

This is your standard USB A-Plug to Micro-USB cable. It's 2 meters long so you'll have plenty of cord to work with for those longer extensions. Perfect for connecting to your Raspberry Pi, Arduino Leonardo/Micro, FONA or Trinket (among other things). It's got extra beefy 24 AWG power wires so it works great for high power (1-2 Amp) computer powering. If you want...

$4.95

In stock

Snap-In Panel Mount Cable - USB C Socket to USB A Plug

Product ID: 4052

This panel mount cable will allow you to enclose a device that has a USB A port, and also converts it to a modern USB C connector at the same time. Perfect for placing your project in a secure box! One end is a USB A plug connector, and other is a USB C socket with special over-molding. What's special about this, you ask? It's a Snap-In Panel Mount Cable - much...

$5.95

In stock

Right Angle 3.5mm Stereo Plug to Pigtail wire Cable

Right-Angle 3.5mm Stereo Plug to Pigtail Cable

Product ID: 1700

One of the most common converter cables you'll want in your cable collection - this 32" long cable converts a standard 3.5mm stereo jack to pigtail wires. Ground ring is black, middle ring is white and tip is red. Cable is 32"/81cm long from end to end. Right-Angle 3.5mm Stereo Plug to Pigtail Cable (4:49)

$1.95

In stock

Angled shot of 3-pin cable matching pair.

2.5mm Pitch 3-pin Cable Matching Pair - JST XH Compatible

Product ID: 4873

$0.95

In stock

HDMI to RCA Audio and CVBS NTSC, PAL, or S-Video Converter

Product ID: 3537

Do you have a S-Video display, projector or monitor that is not compatible with your HDMI devices? Here's an adapter that will allow you to convert HDMI to S-Video, for older video devices that might not have an HDMI input. S-Video has better performance than plain "RCA" composite NTSC/PAL as it separates the color and light level, so if you have a device that can...

$34.95

73 in stock

USB cable - 6" A/MicroB

Product ID: 898

This here is your standard A-microB USB cable, for USB 1.1 or 2.0. Perfect for connecting a PC to your NETduino, Arduino Leonardo, Raspberry Pi (among other things). Approximately 6.5" long from end to end, its a little more compact than our classic 3' long cable We had these made to our specifications, available in Adafruit Black

$2.95

In stock

Demo of coiled black woven USB A to USB C cable connected to a phone and charging.

USB C to USB C Cable w/ 100W Watt Display - 1 meter Black Woven

Product ID: 5789

Product ID: 4364

Just about all electronics use a UART serial port with RX and TX pins for debugging, bootloading, programming, serial output, etc. But it's rare for a computer to have a serial port anymore. Thus, a serial cable is an essential part of any electrical engineer's toolkit. This is a USB C to TTL serial cable with an FTDI FT232R usb/serial chip embedded in the head. It...

$19.95

59 in stock

Magnetic USB Type-C Plug Tip

Product ID: 5524

This is a magnetic USB Type C plug! They pair with the Black Woven USB A or Type-C to Type-C Cable with Magnetic Tip . Plug your USB C power (or data!) cable into one end, then insert the little magnetic nub into your device's charging port. Now you basically have a quick-detach USB C connector with a magnetic alignment. Easy to plug in whenever, no worries if the...

$4.95

In stock

Slip Ring with Flange - 22mm diameter, 6 wires, max 240V @ 2A

Product ID: 736

With a slip ring assembly, your electronics can now twist and turn safely. Add wheel encoders, 360 degree sensors, rotating LEDs, rotors and more! We've seen a lot of people DIY slip ring's out of desperation but no longer, simply pick up one of these to solve any rotation needs you have. Inside the plastic tube is a gold plated slip ring for 6 wires. There are six...

$14.95

In stock

Angled shot of an assembled USB DIY Connector with MicroB Female Plug. The female pluf faces the camera angle.

USB DIY Connector - MicroB Female Plug

Product ID: 1829

As an addition to our other USB DIY shells, we have a 'micro B female' in a panel-mount-like connector. This isn't true panel mount but you could glue the black plastic shell into your project and then press-fit in the micro B connector. The 5-pins are much easier to solder than a surface mount connector We have other DIY "USB shells" are available in USB A plug,...

$0.95

In stock

Angled shot of a pink/purple woven USB cable plugged into a laptop port and a small dev board.

Pink and Purple Woven USB A to USB C Cable - 2 meters long

Product ID: 5044

This cable is not only super-fashionable, with a woven pink and purple Blinka-like pattern, it's also made for USB C for our modernized breakout boards, Feathers and more. If you want something just like it but for Micro B, we have a B version here. First, let's talk about the cover and over-molding. We got these in custom colors, and if you have to have visible...

$3.95

In stock

Angled shot of 20cm long 14-pin 2.54mm pitch jumper cable.

Product ID: 1196

With a slip ring assembly, your electronics can now twist and turn safely. Add wheel encoders, 360 degree sensors, rotating LEDs, rotors and more! We've seen a lot of people DIY slip ring's out of desperation but no longer, simply pick up one of these to solve any rotation needs you have. Inside the plastic tube is a gold plated slip ring for 12 wires. There are 12...

$19.95

73 in stock

Angled shot of 20cm long 7-pin 2.54mm pitch cable.

2.54mm Pitch 7-pin Jumper Cable - 20cm long

Product ID: 4938

$0.95

In stock

RCA (Composite Video, Audio) Female Jack Terminal Block

Product ID: 2793

One truth about working with A/V is you always need the cable or adapter you don't have in your toolbox. That's why we love these terminal-block RCA connectors so much. No soldering required! Use stranded or solid core wire and a small screw driver to create custom wiring jigs. This is the RCA (Composite Video, Audio) Female Jack Terminal Block. RCA is one of the...

$2.50

63 in stock

USB Type C Extension Cable - 1 meter long

Product ID: 5220

If you have a USB Type C port on your computer over here and you want to connect something over there then this extension cable will do the job right quick! This cable is 1 meter long, with all the pins connecting from one side to the other.

$9.95

In stock

DIY HDMI Cable Parts - Right Angle (L Bend) Micro HDMI Plug

Product ID: 3558

If you love DIY cable-rigging, then these HDMI adapters are right up your alley! Making custom HDMI cables has never been easier. Just grab one of our HDMI ribbon cables, then swap and switch any of our HDMI adapters on each end using the flex cable clips. There are options a-plenty! This version is a right angle (L) Micro HDMI plug. Ribbon cable and other adapter...

$6.50

64 in stock

50-pin 0.5mm FFC / FPC Extender

Product ID: 4522

This 50-pin FFC / FPC Extender is very simple. It lets you connect two 50-pin 0.5mm pitch FFC (Flexible Flat Cable) / FPC (Flexible Printed Circuit) cables end-to-end and extend the length. For use with 0.3mm thick FPC cables. Note that pin 1 of one cable is connected to pin 50 of the other so you need to use a cable that has contacts on the same side (type A cable)...

$0.95

In stock

Shrouded Servo to Alligator Clip Cable - 17cm long

Product ID: 5514

Stretch out your servo connections with this flexible servo to alligator clip cable. It has a 3-pin shrouded "male" connection to plug your servo into and then, 17cm later, three alligator clips - it even keeps the common red/black/white color coding for power/ground/signal as you'd expect! This cable is perfect for connecting a servo to something with clip-pads like...

$1.95

In stock

DIY USB or HDMI Cable Parts - 50 cm Ribbon Cable

Product ID: 3563

$3.50

In stock

USB Cable with Type A and Micro B ends and switch in center

USB Power Only Cable with Switch - A/MicroB

Product ID: 2379

ON...off...ON...off...ON...off...ON...off...WE CAN'T STOP CLICKING THIS ON-OFF SWITCH! It has such a satisfying click and it works so well. Plus, it's just about perfect for charging your Raspberry Pi - either Model B, A+, B+, or Pi 2. Just hook up the standard USB end to a 5V 1A USB port power supply or 5V 2A USB port power supply and the Micro B end to a Raspberry...

$5.95

In stock

MicroUSB Plug to 5.5/2.1mm DC Barrel Jack Adapter

Product ID: 2727

The premise of this MicroUSB Plug to 5.5/2.1mm Jack adapter is simple. There's a MicroUSB plug on one end and a 5.5mm/2.1mm DC barrel jack with center positive polarity on the other. This allows you to connect one of our 5V 2 Amp, 5V 4A or 5V 10 Amp adapters to something that expects to connect to 5V USB. We also have a shorty adapter-without-cable version Since this...

$1.95

In stock

Top view of multifunctional USB tester connected to a laptop. The display reads voltage and current information.

Multifunctional USB Digital Tester - USB A and C

Product ID: 4232

While this may appear to be an electronic shuriken, it's actually a Multifunctional USB Digital Tester! This handy (pun intended?) tool can measure voltage, current, power, charge time, and other measurements for USB A, Micro B, and USB C! It features a colorful display that pops up when you plug in a power supply. Each click of the button gives you a different...

$24.95

90 in stock

DIY HDMI Cable Parts - Straight HDMI Socket Adapter

Product ID: 3551

If you love DIY cable-rigging, then these HDMI adapters are right up your alley! Making custom HDMI cables has never been easier. Just grab one of our HDMI ribbon cables, then swap and switch any of our HDMI adapters on each end using the flex cable clips. There are options a-plenty! This version is a straight HDMI socket. Ribbon cable and other adapter not included!...

$6.50

In stock

Magnetic USB micro B Plug Tip

Product ID: 5523

This is a magnetic USB micro b plug! They pair with the Black Woven USB A or Type-C to Type-C Cable with Magnetic Tip . Plug your microUSB power (or data!) cable into one end, then insert the little magnetic nub into your device's charging port. Now you basically have a quick-detach microUSB connector with a magnetic alignment. Easy to plug in whenever, no worries if...

$4.50

In stock

USB C Jack to USB C Jack Round Panel Mount Adapter

Product ID: 4261

If you need to add a panel-mount connection for USB C, but don't have the time or tools to cut a custom oval or square hole, this USB C Jack to USB C Jack Round Panel Mount Plug is the easiest and fastest way to panel-ify your project. It's about 30mm in diameter, so you can drill a hole in your wood, plastic or metal with a common hole-saw or bit, no special shapes...

$7.50

In stock

angled shot of coiled half-meter long black banana plug cable.

Retractable Stacking Banana Plug Cable - Black 0.5 meter long

Product ID: 5472

Why are bananas never lonely? Because they hang around in bunches! A lot of power supplies, multimeters, and other benchtop equipment use standard 4mm banana plugs to connect this-to-that. When you need more, we now stock them! These are handy stackable and retractable Banana Plug cables! The retracting plastic protection bit on the end will automagically disappear...

$4.95

In stock

Passive PoE Injector Cable Set

Product ID: 435

Simplify your Internet of Things with a passive PoE injector cable. These are quite handy for projects that have Ethernet connectivity and also need a power cable. Of course, you can get a long Ethernet cable but then you have to figure out how to plug it in, making a mess of wires. There is an official Power-over-Ethernet standard that allows devices and routers to...

$5.95

In stock

Angled shot of 2 1.25mm pitch JST-XH 5-Pin 200mm matching cable pairs.

1.25mm Pitch 5-pin Cable Matching Pair 10 cm long - Molex PicoBlade Compatible

Product ID: 4975

$0.95

In stock

3.5mm Male/Male Stereo Cable - 1m

Product ID: 2698

Seamlessly transmit high-quality stereo audio with this 3.5mm Male/Male Stereo Cable. Ideal for "passing the AUX cord," or connecting audio devices such as smartphones, tablets, MP3 players, car stereos, portable speakers or any other 3.5mm (otherwise known as "1/8 inch") outputs.

$2.50

35 in stock

JST SH 9-Pin Cable - 100mm long

Product ID: 4350

This 9-pin cable is just about 100mm / 4" long and fitted with JST-SH female connectors on both ends. Compared with chunkier JST-PH these are 1mm pitch instead of 2mm, but still have a nice latching feel and are easy to insert and remove. We got these especially for our fantastically spooky Adafruit MONSTER M4SK in case you'd like to split the mask in two and...

$1.95

99 in stock

Short USB cable with Type A and Type B ends

USB Cable - 6" Standard A-B

Product ID: 900

This here is your standard A-B USB cable, for USB 1.1 or 2.0. Perfect for connecting a PC to your Arduino, USBtinyISP, or USB Boarduino (among other things). 6" long from end to end, its a little more compact than our classic 3' long cable We had these made to our specifications, available in Adafruit Black

$2.95

8 in stock

Angled shot of 1.25mm pitch 20cm long 3-pin cable.

1.25mm Pitch 3-pin Cable 20cm long 1:1 Cable - Molex PicoBlade Compatible

Product ID: 4923

$0.95

In stock

A red 0.5meter long cable with retractable banana plugs.

Retractable Stacking Banana Plug Cable - Red 0.5 meter long

Product ID: 5471

$4.95

In stock

2.1mm 5VDC Barrel Jack to USB C Adapter

Product ID: 4536

As technology changes and adapts, so does Adafruit, and speaking of adapting, this adapter has a 2.1mm barrel jack socket and a USB C plug - you could use this to power a USB C device from a common wall adapter. USB C is the latest industry-standard connector for transmitting data and power. Like Lightning and MagSafe cables, USB C has no up or down orientation. Plug...

$5.50

In stock

Angled shot of 1.25mm Pitch 6-pin Cable 20cm long.

1.25mm Pitch 6-pin Cable 20cm long 1:1 Cable - Molex PicoBlade Compatible

Product ID: 4926

$1.25

In stock

FTDI Serial TTL-232 USB Type C Cable - 3V Power and Logic

Product ID: 4331

$19.95

In stock

DIY USB Cable Parts - Right Angle Micro B Plug Up

Product ID: 4104

If you love DIY cable-rigging, then these USB adapters are right up your alley! Making custom USB cables has never been easier. Just grab one of our ribbon cables, then swap and switch any of our USB adapters on each end using the flex cable clips. There are options a-plenty! This version is a USB Right Angle Micro B Plug Up only. (We also have the 'down' version...

$4.95

71 in stock

USB cable with Type A and Right Angle Micro B end

Right Angle USB cable - A/MicroB

Product ID: 1318

This here is your standard A to micro-B USB cable, for USB 1.1 or 2.0, but with a twist! Literally! Instead of the cable coming straight out from the connector, there's a right angle bend. We thought this might make a good pair for a Raspberry Pi Model A or B as the cable doesn't stick out as far. We got cables with extra-beefy 24 AWG power wires, and 28 AWG data...

$4.95

In stock

Micro B USB 2-Way Y Splitter Cable

Product ID: 3030

Double up on your micro USB capabilities with the Micro B USB 2-Way Splitter Cable. This splitter is great for reducing cable clutter and freeing up port space. It takes a single Micro B connection (with data and power) and gives you two outputs. The longer cable has data and power brought to it. The shorter cable is only power. You can also use it just for power...

$2.95

In stock

HDMI Input to USB 2.0 Video Capture Adapter

Product ID: 4669

Here's one of the easiest capture solutions for getting HDMI data into your computer or Raspberry Pi, really any system with a USB port.. Use this capture device to convert a video signal from a camera (or another device) into a digital format your computer can recognize. Its trivially easy to use: connect one end to an HDMI output up to 1080p. Connect the other end...

$19.95

In stock

Angled shot of a DIY USB Straight Type A Jack Cable Part.

DIY USB Cable Parts - Straight Type A Jack

Product ID: 4110

Product ID: 762

$1.95

81 in stock

HDMI Round Panel Mount Plug

Product ID: 4129

If you need to add a panel-mount connection for HDMI, but don't have the time or ability to cut a custom oval or square hole, this HDMI Round Panel Mount Plug is the easiest and fastest way to panel-ify your existing HDMI kit. It's about 30mm in diameter, so you can drill a hole in your wood, plastic or metal with a common hole-saw or bit, no special shapes or filing...

$5.95

In stock

DIY HDMI Cable Parts - Right Angle (R Bend) Micro HDMI Plug

Product ID: 3557

$6.50

In stock

Cable Gland PG-9 size - 0.158" to 0.252" Cable Diameter - PG-9

Product ID: 761

$1.95

In stock

USB Type C Cable with Data/Charge Switch - 1 meter long

Product ID: 4696

Perhaps your smart phone, tablet, or even your Raspberry Pi 4, charges off of USB, but can you really trust that charging station at the airport? Now you can control when to allow data in or out of your device with this specially-designed USB cable.Voila! Your cable's data lines can now be switched on or off. USB C is the latest industry-standard connector for...

$4.95

In stock

PS/2 Keyboard+Mouse to USB adapter

Product ID: 971

This is a nice solution to wanting to use PS/2 devices (such as our capacitive touch pad or magstripe readers). It's also handy if you want to connect a keyboard and mouse to a Raspberry Pi or Beagle Bone without taking up two USB ports. Inside is a full translation chip - a small USB microcontroller that will translate the PS/2 into "USB Keyboard" and "USB Mouse" We...

$5.95

7 in stock

RCA NTSC or PAL or S-Video Input to USB Capture Adapter

RCA NTSC or PAL or S-Video Input to USB 2.0 Capture Adapter

Product ID: 4715

Here's one of the easiest capture solutions for bringing old school audio and video into your computer or Raspberry Pi, really any system with a USB port... Use this capture device to convert an analog NTSC or PAL video signal from an older device into a digital format your computer can recognize. It's trivially easy to use: connect and match up the audio and either...

$19.95

26 in stock

Product ID: 4929

$1.25

In stock

1/4" (6.35mm) Stereo Plug Terminal Block

Product ID: 2911

One truth about working with audio is you always need the cable or adapter you don't have in your toolbox. That's why we love these terminal-block audio connectors so much. No soldering required! Use stranded or solid core wire and a small screw driver to create custom wiring jigs. This is the 1/4" (6.35mm) Stereo Plug Terminal Block. It's a pretty common size and is...

$1.95

42 in stock

2.5" SATA III to USB 3.0 Adapter Cable - 30cm long

Product ID: 5622

This 2.5" SATA III to USB 3.0 Adapter Cable allows you to connect a standard 2.5" hard drive (HDD or SSD) to your computer. SATA III is like, a souped-up electronic energy drink, letting you backup files with a data rate up to 6Gbps. It's perfect for adding mega-amounts of storage to your single board computer, like a Raspberry Pi or BeagleBone. Simply plug the drive...

$14.95

48 in stock

Angled shot of 10 USB-C jack connectors.

USB C SMT / THM Jack Connector - Power Only - Pack of 10

Product ID: 4907

If you're a DIY enthusiast who'd like to update your power only project's connection to the latest USB standard, here is a 10-pack of USB C power only jack connectors! They're sturdy metal with 4 through-hole mounting tabs. It's really hard to rip these off a PCB. In an SMT line, you can just paste over the through-hole slots, and the pads will solder in place. We...

$2.95

50 in stock

USB A Jack to 5.5/2.1mm jack adapter

Product ID: 988

This little dongle will let you connect one of our 5V 2Amp or 5V 10Amp adapters to something that expects to connect to USB. The premise is simple - one end has a USB A female jack and the other has a 'standard' 5.5mm OD/2.1mm ID barrel jack with center positive polarity. It does not have any resistors or other connections inside for the data lines so this won't work...

$2.95

80 in stock

30-pin 0.5mm FFC / FPC Extender

Product ID: 5204

This 30-pin FFC / FPC Extender is very simple. It lets you connect two 30-pin 0.5mm pitch FFC (Flexible Flat Cable) / FPC (Flexible Printed Circuit) cables end-to-end and extend the length. For use with 0.3mm thick FPC cables. Note that pin 1 of one cable is connected to pin 30 of the other so you need to use a cable that has contacts on the same side (type A-A...

$0.95

In stock

IDE Molex 4-pin Plug Cable - 30cm long

Product ID: 5391

If you're messing around with floppy drives, or disk drives, or other devices that are usually powered with a PC motherboard you'll often see these big 'Molex' connectors used to provide power. They are used to give 5V (red), 12V (yellow) and ground (black) and with this connector you can easily wire up your favorite power supply or bench-top power source. We also...

$0.95

In stock

YC-8 Quick Release 4 Pin Connector Matching Pair

Product ID: 5144

If you want the look and feel of aeronautical style quick-release connectors, this YC-8 4-pin Connector Matching Pair is an elegant and inexpensive alternative. Sure, they're not mil-spec but they do work and look great for DIY projects, keyboard builds, robotics, wearables and more. The connector snaps together smoothly, and can disconnect only when the sleeve is...

$7.50

45 in stock

Top shot Reprogrammable PD cable with programmer with USB adapter PCB.

Re-programmable USB Type-C PD to 2.1/5.5mm Barrel Jack Cable

Product ID: 5501

This unusual cable is sort of the 'ultimate' in USB type C Power Delivery (PD) hacking: good for experienced hardware hackers who are comfortable with a cable that can shape-shift from one setting to the other. Instead of having to juggle multiple wall warts with different power and current capabilities, this cable will convert any USB Type C power adapter with Power...

$19.50

In stock

RCA (Composite Video, Audio) Male Plug Terminal Block

Product ID: 2792

$1.50

In stock

802.3af PoE Output Data & Power Splitter - 5/9/12V

Product ID: 3239

$24.95

In stock

Angled shot of a coiled cable with USB-C and DB-9 connectors.

USB Type C to DB-9 Adapter Cable - 1.5m long

Product ID: 5446

This USB Type C cable adds a DB-9 (DE-9) serial port to your computer or laptop. Works with MacOS X, Linux, and Windows. Note that this provides (approximately) +-6V serial (RS232) not 5V serial (TTL), good for old devices like GPS, handhelds, programmers, etc with chunky DB9's on the side. Some cheaper RS232 cables 'cheat' and only give you 0-5V which won't work...

$17.50

In stock

Pack of 10 USB Type C SMT / THM Jack Connectors

USB Type C SMT / THM Jack Connector - Pack of 10

Product ID: 4458

If you're a DIY enthusiast who'd like to update your project's connection to the latest USB standard, here is a 10-pack of USB C jack connectors! They're sturdy metal with 4 through-hole mounting tabs and two positioning/shear-protection dots. It's really hard to rip these off a PCB. In an SMT line you can just paste over the through-hole slots, and the pads will...

$8.95

In stock

MakeCode Sync Cable - micro B USB to micro B USB - 1 meter long

Product ID: 4342

Ready Players 1 and 2? Double up on your MakeCode gaming with a Sync Cable! We got this Micro B USB to Micro B USB cable specially made to connect you and your frenemy for co-op fun or player-versus-player showdowns. Works with our PyBadges and PyGamer - we connected the JACDAC pin to the 'extra' ID pin of the Micro B cable so data can pass back and forth. It's one...

$2.95

In stock

USB Extension Cable with Data/Charge Sync Switch

Product ID: 3438

Your cell phone charges off of USB, but can you really trust that charging station at the airport? Now you can control when to allow data in or out of your device with this little USB extension cable. You can plug it onto the end of any USB data/sync cable you have: mini-USB, micro-USB, Apple Lightning, or any other proprietary type. Voila! Your cable's data lines...

$2.95

57 in stock

Angled shot of 20cm long 1.25mm pitch 7-pin color-coded cable.

Product ID: 2789

The premise of this MicroUSB to 5.5/2.1mm DC Barrel Jack Adapter is simple. There's a MicroUSB plug on one end and a 5.5mm/2.1mm DC barrel jack with center positive polarity on the other. This allows you to connect one of our 5V 2 Amp, 5V 4A or 5V 10 Amp adapters to something that expects to connect to 5V USB. We also have a cable-version of this, but this one is...

$1.95

68 in stock

Photograph of 10 USB Type C SMT / THM Jack Connectors

Edge-Launch USB Type C SMT Plug Connector - Pack of 10

Product ID: 4932

Product ID: 5213

Here's an easy solution for keeping your Mini HDMI ports free from dust and other unsavory particulates. These squishy Silicone Mini HDMI Dust Cover Inserts slip neatly into any computer or device with a Mini HDMI socket. Comes in a pack of ten, so you're set even if you have a display or computer with a lot of ports, or if you lose some. We also have these covers...

$5.95

In stock

Short USB cable with Type A and Mini B ends

USB cable - 6" A/MiniB

Product ID: 899

This here is your standard A-miniB USB cable, for USB 1.1 or 2.0. Perfect for connecting a PC to your Teensy, USB Lipo charger (among other things). The cable is approximately 6" long - a little more compact than our classic 3' long cable We had these made to our specifications, available in Adafruit Black

$2.95

In stock

Micro B USB Cable with LCD Voltage / Current Display

Product ID: 3388

This here is your standard A to micro-B USB cable, for USB 1.1 or 2.0. Perfect for connecting any development board, microcontroller, mobile phone, or other device to your computer or charger. "Standard?" you might say... nothing gets past the astute eye of an Adafruit customer! Why yes, that is an LCD display embedded in the cable! This is basically like a USB cable...

$12.50

38 in stock

Mini USB Round Panel Mount Plug showing front port

USB Mini B Jack to USB A Jack Round Panel Mount Adapter

Product ID: 4211

If you need to add a panel-mount connection for USB Mini B, but don't have the time or tools to cut a custom oval or square hole, this Round Panel Mount Plug is the easiest and fastest way to panel-ify your project. It's about 30mm in diameter, so you can drill a hole in your wood, plastic or metal with a common hole-saw or bit, no special shapes or filing required....

$5.95

In stock

DIY HDMI Cable Parts - Straight Mini HDMI Socket Adapter

Product ID: 3555

If you love DIY cable-rigging, then these HDMI adapters are right up your alley! Making custom HDMI cables has never been easier. Just grab one of our HDMI ribbon cables, then swap and switch any of our HDMI adapters on each end using the flex cable clips. There are options a-plenty! This version is a straight Mini HDMI socket. Ribbon cable and other adapter not...

$6.50

In stock

Panel Mount HDMI Socket Breakout

Product ID: 3121

Make your own custom HDMI input or HDMI interface with ease, using this HDMI Socket Breakout. You get a nice solid PCB with an HDMI socket that you can solder to assemble your own wiring jigs. You can add in some terminal blocks to make the wiring easier, or check out the HDMI Socket to Terminal Block Breakout which comes with them built in. We recommend this adapter...

$3.50

In stock

DIY USB or HDMI Cable Parts - 100 cm Ribbon Cable

Product ID: 3564

$9.95

73 in stock

Ethernet Cable - 10 ft long

Product ID: 730

We have so many Internet-connected goodies in the shop, we figured it's time to carry a cable so you can easily connect them up! This cable is 10 feet long, black and has all 8 wires installed. Perfect for use with the BeagleBone, Arduino Uno Ethernet, Arduino Ethernet Shield, NETduino Plus, Patch Shield, PoE Injector cables, IoT Printer pack or any other...

$6.95

47 in stock

Reverse angled shot of Aviation cable connector.

FGG.0B Quick Connect 5 Pin Plug - 9mm Outer Diameter

Product ID: 5316

If you want the look and feel of aeronautical style quick-release connectors, this FGG.0B 5-pin Plug is an elegant and inexpensive alternative to official LEMO-C connectors. Sure, they're not mil-spec but they do work and look great for DIY projects, keyboard builds, robotics, wearables, and more. The connector snaps together smoothly and can disconnect only when the...

$12.50

31 in stock

USB Micro B Cable with LEDs - Blue and Green color - 1 Meter

USB micro B Cable with LEDs - Blue and Green - 1 meter

Product ID: 4009

At first glance this appears to be an ordinary A to micro B USB cable. Plug it in to your device and power supply, and you get a colorful glitter of dozens of little LEDs embedded in the length of the cable. Can be used for data and charging. The LEDs are luminous but not too bright. Perfect for vampire makers, candy ravers, or maybe night owls who misplace their...

$6.95

In stock

3.5mm Stereo Male/Male Cable - Gold Metal - 1 meter long

Product ID: 4066

$2.95

In stock

3.5mm Stereo Male/Male Audio Cable - Silver Metal - 1 meter long

Product ID: 4067

$2.95

In stock

Slim HDMI Cable - 1820mm / 6 feet long

Product ID: 2422

Connect two HDMI devices together and save space with this slim, high quality HDMI cable. It has nice molded grips for easy installation and is 1820mm long (~6 feet). Sporting a teeny 4mm diameter this cable stays out of your way! We also have slim HDMI cables at 450mm long and 914mm long.

$14.95

In stock

FGG.0B Quick Connect 5 Pin Panel Mount Socket - 9mm

Product ID: 5317

If you want the look and feel of aeronautical style quick-release connectors, this FGG.0B 5-pin Socket is an elegant and inexpensive alternative to official LEMO-C connectors. Sure, they're not mil-spec but they do work and look great for DIY projects, keyboard builds, robotics, wearables, and more. The connector snaps together smoothly and can disconnect only when...

$9.95

72 in stock

USB Micro B Cable with LEDs - Blue and Red color - 1 Meter

USB micro B Cable with LEDs - Blue and Red - 1 meter

Product ID: 4008

$6.95

In stock

60-pin 0.5mm FFC / FPC Extender

Product ID: 5205

This 60-pin FFC / FPC Extender is very simple. It lets you connect two 60-pin 0.5mm pitch FFC (Flexible Flat Cable) / FPC (Flexible Printed Circuit) cables end-to-end and extend the length. For use with 0.3mm thick FPC cables. Note that pin 1 of one cable is connected to pin 60 of the other so you need to use a cable that has contacts on the same side (type A-A...

$1.25

74 in stock

Angled shot of USB cable with on-off switch connected to a laptop port, a Raspberry Pi computer, and a USB key.

USB Host Switching Cable - Mini Mechanical KVM

Product ID: 4844

This ordinary-looking USB cable actually has a surprise trick up its rubber sleeve. It's kinda like a 'miniature KVM' (minus the video part, and only one USB port). The mechanical switch connects to the D+ and D- pins on the two USB A host ports. So when you switch back and forth, the USB peripheral connects from one to the other. So, suppose you're working with...

$19.95

In stock

DIY RCA Plug - 3 Pack

Product ID: 2882

RCAs are some of our favorite plugs. Easy to use and easy to handle. They're one of those plugs that everyone has fond memory of using. Our favorite memory was when we accidentally plugged the composite video plug into one of the stereo jacks and our TV made a loud noise - classic! This three-pack of RCA plugs comes with everything you need to make your own RCA plug...

$3.95

21 in stock

Mini DisplayPort to DisplayPort Cable - 10 ft/3 meters - White

Product ID: 1698

Connect your DisplayPort and Mini DisplayPort sources and devices with this bi-directional cable! This cable has a standard sized DisplayPort (DP) connector on one end and a Mini DisplayPort (MDP) connector on the other. The cable is bi-directional, which means that you can use a DP source with a MDP monitor or a MDP source with a DP monitor. The conductors are made...

$9.95

22 in stock

Angled shot of 2m long PlayStation extension cable.

PlayStation Extension Cable - Compatible with PS1 and 2 - 2 Meters

Product ID: 5773

Ostensibly this extension cord was originally designed to allow PlayStation game players to be able to sit across the room from their game system, but what we are using it for is to connect to PS controllers and accessories without soldering directly to cables or cutting the connectors off. Since the connector is proprietary, it isn't like you can get a socket or...

$4.95

25 in stock

Notify Me

$3.50

Out of stock

Notify Me

angled shot of 100mm long JST-SH 3-pin cable with male headers.

JST SH Compatible 1mm Pitch 3 Pin to Premium Male Headers Cable - 100mm long

Product ID: 5755

If you're fancying to connect to the debug port on a Pico WH, or the two ports on a Pico Debug Probe or anything else with a JST SH compatible 3-pin connector, this cable will do the trick. It has a 1mm pitch JST SH connector on one end, and 0.1" pitch plug connectors on the other. Note that the colors we got are somewhat matchy with our '2mm PH' sized STEMMA cables,...

Notify Me

$1.50

Out of stock

Notify Me

Angled shot of coiled USB-A to USB-B cable.

USB Cable - Standard A-B - 3 ft/1m

Product ID: 62

This here is your standard A-B USB cable, for USB 1.1 or 2.0. Perfect for connecting a PC to your Arduino, USBtinyISP (among other things). 3 feet / 1 meter long Color may vary!

Notify Me

$3.95

Out of stock

Notify Me

Angled shot of 30cm long shrouded servo connector to male jumper cable connectors.

Shrouded Servo to Premium Male Jumper Wires Cable - 17cm long

Product ID: 5515

Stretch out your servo connections with this flexible servo to premium male header jumper cable. It has a 3-pin shrouded "male" connector to plug the servo into and then, 17cm later, three separated jumper wire ends that plug into a breadboard or some header. It's excellent for when you want to quickly and easily connect a servo to an existing dev board with sockets,...

Notify Me

$0.95

Out of stock

Notify Me

Angled shot of Four 2-pin 0.1" Pig-Tail Cables.

Pig-Tail Cables - 0.1" 2-pin - 4 Pack

Product ID: 1003

You'll find these handy 2-pin 0.1" spacing pig-tails to be quite helpful when wiring up your project. The connector end snaps cleanly into 0.1" spaced header (and fits neatly side by side on 0.1" spacing as well). We think this would be especially useful when paired with our PWM driver breakout, to control 16 PWM LEDs that are wired, but there are probably a dozen...

Notify Me

$1.95

Out of stock

Notify Me

Angled shot of a black woven USB cable plugged into a laptop port and a small dev board.

Black Woven Right Angle USB C to USB A Cable - 0.2m long

Product ID: 5045

As technology changes and adapts, so does Adafruit, and speaking of adapting, check this Right Angle Black Woven USB-C to USB-A Cable. USB C is the latest industry-standard connector for transmitting data and power. Like Lightning and MagSafe cables, USB C has no up or down orientation. Works great with any device or cable that has a USB C port. This cable is a...

Notify Me

$3.50

Out of stock

Notify Me

Angled shot of an assembled USB DIY Connector Shell with a Type Micro-B Plug. The male plug faces the camera at an angle.

USB DIY Connector Shell - Type Micro-B Plug

Product ID: 1390

Notify Me

$0.95

Out of stock

Notify Me

USB Extension Cable - 3 meters / 10 ft long

Product ID: 993

This handy USB extension cable will make it easy for you to extend your USB cable when it won't reach. The connectors are gold plated for years of reliability. We use these handy cables all over our factory and homes. Cable is standard "Adafruit black". Cable length: 10 feet (3 meters)

Notify Me

$6.95

Out of stock

Notify Me

3.5mm Stereo Male/Male Cable in Various Metal Colors - 1 meter

Product ID: 4070

More Info

In stock

More Info

Top view of several different kinds of 2.54mm pitch Molex PicoBlades as jumper wires.

2.54mm 0.1" Pitch Jumper Cables in Various Widths - 20cm long

Product ID: 5070

More Info

In stock

More Info

USB cable - A/MiniB - 3ft

Product ID: 260

This here is your standard A-miniB USB cable, for USB 1.1 or 2.0. Perfect for connecting a PC to your Teensy v2, USB Lipo charger w/Mini B connector, among other things. Approximately 3 feet / 1 meter long Color may vary!

Notify Me

$3.95

Out of stock

Notify Me

Top view of various JST-SH cables of varying lengths and connectors.

JST-SH 4-pin STEMMA QT / Qwiic Cables in Various Lengths

Product ID: 4912

These cables can be used with Qwiic or STEMMA QT boards to easily connect sensors and drivers from one board to the other. This variety of cables gives you the option of breadboarding with headers, using capacitive touch with alligator clips, and more. Compared with the chunkier JST-PH, these are 1mm pitch instead of 2mm, but still have a nice latching feel, while...

More Info

In stock

More Info

Top view of four connected pairs of JST PH compatible cables.

2.0mm Pitch Cable Matching Pairs - JST PH Compatible

Product ID: 5161

In stock

Product ID: 2623

Discontinued

Pomona Minigrabber Test Clip to Stacking Banana Plug - 12" - Black

Product ID: 2611

Why are bananas never lonely? Because they hang around in bunches! And we have a bunch of these handy Pomona Minigrabber Test Clip to Stacking Banana Plug cables! Great for use with your benchtop equipment, these are the highest quality cables and will last you years, if not decades. This is the 12" long Black version. Check out different colors and sizes here. The...

More Info

Discontinued

More Info

Angled shot of a red test clip to stacking banana plug cable - 12".

Pomona Minigrabber Test Clip to Stacking Banana Plug - 12" - Red

Product ID: 2605

Why are bananas never lonely? Because they hang around in bunches! And we have a bunch of these handy Pomona Minigrabber Test Clip to Stacking Banana Plug cables! Great for use with your benchtop equipment, these are the highest quality cables and will last you years, if not decades. This is the 12" long Red version. Check out different colors and sizes here. The...

More Info

Discontinued

More Info

Angled shot of Back Pomona Test Lead Holder.

Product ID: 3523

Discontinued - you can grab Retractable Stacking Banana Plug Cable - Black 0.5 meter long instead! We're always digging around for various test lines to use with our power supply - whether we're checking current draw of our Feather, or trying out new LED samples. We picked up one of these and its so handy we use it all the time now. It's compact and has three of the...

More Info

Discontinued

More Info

Pink and Purple Braided USB A to Micro B Cable - 2 meters long

Pink and Purple Braided USB A to Micro B Cable - 2 meter long

Product ID: 4148

This cable is super-fashionable with a woven pink and purple Blinka-like pattern! First let's talk about the cover and over-molding. We got these in custom colors, and if you have to have visible cables, then you might as well have the nicest fabric-bound cable with a eye-catching python pattern. Perfect for connecting to your PyPortal, Circuit Playground Express,...

More Info

Discontinued

More Info