Development Boards

Top view of an Adafruit Metro, Circuit Playground, Feather, and Trinket

The development board category is DIY's beating heart. These are the boards that pump liquid solder through your project's veins and keep makers pushing boundaries, breaking down barriers, and finding creative solutions based off of the myriad microprocessors these boards are built around.

Whether you're looking for a hot-off-the presses Adafruit original, or trying to build out your Arduino-compatible collection, or are just a Feather completest - Development Boards are where Maker projects and DIY innovation begin!

Angled shot of rectangular microcontroller.

Adafruit Feather HUZZAH with ESP8266 - Loose Headers

Product ID: 2821

Feather is the new development board from Adafruit, and like its namesake, it is thin, light, and lets you fly! We designed Feather to be a new standard for portable microcontroller cores. This is the Adafruit Feather HUZZAH ESP8266 - our take on an 'all-in-one' ESP8266 WiFi development board with built-in USB and battery charging. It's an ESP8266 WiFi module with...

$14.95

In stock

Bundle of Small Alligator Clip Test Leads

Small Alligator Clip Test Lead (set of 12)

Product ID: 1008

Connect this to that without soldering using these handy mini alligator clip test leads. 15" cables with alligator clip on each end, color coded. You get 12 pieces in 6 colors. Strong and grippy, these always come in handy! We often use these in conjunction with a multimeter so we don't have to hold the probes in place. Compared to our Large alligator clip set, these...

$3.95

In stock

Stacking Headers for Feather - 12-pin and 16-pin female headers

Product ID: 2830

These two Female Stacking Headers alone are, well, lonely. But pair them with any of our Feather boards and you're in business! What do they do? They stack. Put the headers through your Feather and then you can not only plug them into a solderless breadboard, but you could attach circuitry on top as well Note: Comes with one 12-pin and one 16-pin header, Feathers not...

$1.25

In stock

Hand holding Adafruit TriHand holding small Adafruit Trinket - Mini Microcontrollerket board.

Adafruit Trinket - Mini Microcontroller - 5V Logic

Product ID: 1501

Deprecation Warning: The Trinket bit-bang USB technique it uses doesn't work as well as it did in 2014, many modern computers won't work well. So while we still carry the Trinket so that people can maintain some older projects, we no longer recommend it. Please check out the Trinket M0. It has built-in USB, more capabilities, and is comparable in price! Trinket may...

$6.95

In stock

Adafruit Feather M0 WiFi - ATSAMD21 + ATWINC1500

Product ID: 3010

Feather is the new development board from Adafruit, and like its namesake it is thin, light, and lets you fly! We designed Feather to be a new standard for portable microcontroller cores. This is the Adafruit Feather M0 WiFi w/ATWINC1500 - our take on an 'all-in-one' Arduino-compatible + high speed, reliable WiFi with built in USB and battery charging. Its an...

$39.95

In stock

Adafruit Pro Trinket - 5V 16MHz

Product ID: 2000

Deprecation Warning: The Pro Trinket bit-bang USB technique it uses doesn't work as well as it did in 2014, many modern computers won't work well. So while we still carry the Pro Trinket so that people can maintain some older projets, we no longer recommend it. Please check out the Metro Mini (ATmega328 @ 5V 16 MHz), ItsyBitsy 32u4 5V 16MHz, ItsyBitsy 32u4 @ 3.3V...

$9.95

In stock

Adafruit GEMMA v2 - Miniature wearable electronic platform

Product ID: 1222

Deprecation Warning: The Gemma bit-bang USB technique it uses doesn't work as well as it did in 2014, many modern computers won't work well. So while we still carry the Gemma so that people can maintain some older projects, we no longer recommend it. Please check out the Gemma M0. It has built-in USB, more capabilities, and is comparable in price! Love FLORA but want...

$9.95

5 in stock

Header Kit for Feather - 12-pin and 16-pin Female Header Set

Product ID: 2886

These two Female Headers alone are, well, lonely. But pair them with any of our Feather boards and you're in business! What do they do? They get soldered on either side of the Feather board. Now you can plug in FeatherWings to add more capability to your portable project. Unlike our Feather Stacking Headers, they aren't designed to 'stack', but they're more compact....

$0.95

In stock

3 x AAA Battery Holder with On/Off Switch and 2-Pin JST

Product ID: 727

This battery holder connects 3 AAA batteries together in series for powering all kinds of projects. We spec'd these out because the box is slim, and 3 AAA's add up to about 3.3-4.5V, a very similar range to Lithium Ion/polymer (Li-Ion) batteries and have an on-off switch. That makes them ideal for use with 3.3V projects that have a 2-pin JST connector meant for one...

$1.95

In stock

Short Headers Kit for Feather - 12-pin + 16-pin Female Headers

Product ID: 2940

These two Short Female Headers alone are, well, lonely. But pair them with any of our Feather boards and you're in business! These headers are particularly cute and tiny with a body height of just 5.0 mm they are the best way to minimize the amount of space your Feather project takes up, but still maintain that flexible configuration. "Normal" socket headers have an...

$1.50

In stock

USB cable - USB A to Micro-B - 3 foot long

Product ID: 592

This here is your standard A to micro-B USB cable, for USB 1.1 or 2.0. Perfect for connecting a PC to your Metro, Feather, Raspberry Pi or other dev-board or microcontroller Approximately 3 feet / 1 meter long

$2.95

In stock

Adafruit Trinket - Mini Microcontroller - 3.3V Logic - MicroUSB

Product ID: 1500

$6.95

In stock

Adafruit Pro Trinket - 3V 12MHz

Product ID: 2010

$9.95

48 in stock

Adafruit Ethernet FeatherWing

Product ID: 3201

Wireless is wonderful, but sometimes you want the strong reliability of a wire. If your Feather board is going to be part of a permanent installation, this Ethernet FeatherWing will let you add quick and easy wired Internet. Just plug in a standard ethernet cable, and run the Ethernet2 library for cross-platform networking. Works with all/any of our Feather boards as...

$19.95

In stock

Overhead shot of long skinny black microcontroller connected to an OLED screen and a temperature-and-humidity sensor. The sensor data displays on the OLED.

Adafruit Metro Mini 328 V2 - Arduino-Compatible - 5V 16MHz - STEMMA QT / Qwiic

Product ID: 2590

One of our star development boards is the Adafruit METRO Mini 328, an excellent lil fellow that lets you make your Arduino-based project tiny. Recently we had to redesign this board to move from the obsolete CP2104 to the available CP2102N, and one thing led to another, and before you know it we made a completely refreshed design: the Adafruit METRO Mini 328 V2. The...

$14.95

In stock

Adafruit LiIon/LiPoly Backpack soldered onto a Pro Trinket, plugged into a solderless breadboard.

Adafruit LiIon/LiPoly Backpack Add-On for Pro Trinket/ItsyBitsy

Product ID: 2124

If you have an ItsyBitsy or Pro Trinket you probably know it's the perfect little size for a portable project. This LiPoly backpack makes it really easy to do! Instead of wiring 2 or 3 boards together to make a charging system, this little PCB sits on top of the PCB and allows a LiPoly/LiIon battery to plug in. When the Pro Trinket or ItsyBitsy USB port is powered,...

$4.95

In stock

Adafruit Feather 32u4 Bluefruit LE

Product ID: 2829

Feather is the new development board from Adafruit, and like its namesake it is thin, light, and lets you fly! We designed Feather to be a new standard for portable microcontroller cores. This is the Adafruit Feather 32u4 Bluefruit - our take on an 'all-in-one' Arduino-compatible + Bluetooth Low Energy with built in USB and battery charging. Its an Adafruit Feather...

$29.95

In stock

Angled shot of a black rectangular microcontroller adapter board assembled with an even smaller green microcontroller board.

Teensy 3.x Feather Adapter

Product ID: 3200

Oh man, is this not the best thing ever? You can now use the awesome Teensy 3 with any and all of our FeatherWings or Feather accessories and even get built-in LiPoly charging! This Feather adapter rearranges the pins of a Teensy 3.x to give you the same shape and pinout for our Feathers. We've tested our FeatherWings so far and all are drop-in compatible. It's a...

$6.95

In stock

10-pin 2x5 Socket-Socket 1.27mm IDC Cable

10-pin 2x5 Socket-Socket 1.27mm IDC (SWD) Cable - 150mm long

Product ID: 1675

These little cables are handy when programming or debugging a tiny board that uses 10-pin 1.27mm (0.05") pitch SWD programming connectors. We see these connectors often on ARM Cortex dev kits, and have a few handy in our ARM-dev box. We thought you may want a backup cable as well, so now they are in the Adafruit shop! One cable per order. The ribbon cable is...

$2.95

In stock

Adafruit FeatherWing OLED - 128x32 OLED Add-on For Feather

Product ID: 2900

A Feather board without ambition is a Feather board without FeatherWings! This is the FeatherWing OLED: it adds a 128x32 monochrome OLED plus 3 user buttons to any Feather main board. Using our Feather Stacking Headers or Feather Female Headers you can connect a FeatherWing on top of your Feather board and let the board take flight! These displays are small, only...

$14.95

In stock

Adafruit Feather M0 Bluefruit LE

Product ID: 2995

Feather is the new development board from Adafruit, and like its namesake, it is thin, light, and lets you fly! We designed Feather to be a new standard for portable microcontroller cores. This is the Adafruit Feather M0 Bluefruit LE - our take on an 'all-in-one' Arduino-compatible + Bluetooth Low Energy with built-in USB and battery charging. It's an Adafruit...

$29.95

In stock

Angel shot Adafruit Feather M0 with RFM95 LoRa Radio - 900MHz

Adafruit Feather M0 with RFM95 LoRa Radio - 900MHz - RadioFruit

Product ID: 3178

This is the Adafruit Feather M0 RFM95 LoRa Radio (900MHz). We call these RadioFruits, our take on an microcontroller with a "Long Range (LoRa)" packet radio transceiver with built in USB and battery charging. Its an Adafruit Feather M0 with a 900MHz radio module cooked in! Great for making wireless networks that are more flexible than Bluetooth LE and without the...

$34.95

In stock

Top view shot of JST 2-pin Extension Cable with On/Off Switch.

JST 2-pin Extension Cable with On/Off Switch - JST PH2

Product ID: 3064

By popular request - we now have a way you can turn on-and-off Lithium Polymer batteries without unplugging them. This PH2 Female/Male JST 2-pin Extension Cable comes with an in-line Switch - click once to turn on, click again to turn off. It's super handy especially in tandem with our JST-terminated battery packs or LiIon & LiPoly batteries/accessories/chargers!...

$2.95

In stock

Angled shot of rectangular microcontroller with a MicroSD card installed.

Adafruit Feather M0 Adalogger

Product ID: 2796

Feather is the new development board from Adafruit, and like its namesake it is thin, light, and lets you fly! We designed Feather to be a new standard for portable microcontroller cores. This is the Adafruit Feather M0 Adalogger - our take on an 'all-in-one' Cortex M0 datalogger (or data-reader) with built in USB and battery charging. Its an Adafruit Feather M0 with...

$19.95

In stock

Top-down view of 6 pairs of short wire alligator clips.

Short Wire Alligator Clip Test Lead (set of 12)

Product ID: 1592

Connect this to that without soldering using these handy mini alligator clip test leads. Approximately 4.5" overall cables with alligator clip on each end, color coded. You get 12 pieces in 6 colors. Strong and grippy, these always come in handy! We often use these in conjunction with a multimeter so we don't have to hold the probes in place. Compared to our Large...

$3.95

In stock

Adalogger FeatherWing with Real time clock and SD card slot.

Adalogger FeatherWing - RTC + SD Add-on For All Feather Boards

Product ID: 2922

A Feather board without ambition is a Feather board without FeatherWings! This is the Adalogger FeatherWing: it adds both a battery-backed Real Time Clock and micro SD card storage to any Feather main board. Using our Feather Stacking Headers or Feather Female Headers you can connect a FeatherWing on top of your Feather board and let the board take flight! Check out...

$8.95

In stock

Angled shot of black and white microcontroller.

Adafruit METRO 328 - Arduino Compatible - with Headers - ATmega328

Product ID: 2488

This is the Adafruit METRO Arduino-Compatible - with headers. It's a fully assembled and tested microcontroller and physical computing board with through-hole headers attached. If you don't want a Metro with the headers attached for super-slimness, check out our Metro without Headers. The METRO works great with the Arduino IDE, and runs the ATmega328P at 16MHz so it...

$17.50

In stock

Adafruit Feather M0 RFM69HCW Packet Radio - 868 or 915 MHz - RadioFruit

Product ID: 3176

This is the Adafruit Feather M0 RFM69 Packet Radio (868 or 915 MHz). We call these RadioFruits, our take on an microcontroller with a RFM69HCW packet radio transceiver plus built in USB and battery charging. Its an Adafruit Feather M0 with a 900MHz radio module cooked in! Feather is the new development board from Adafruit, and like its namesake it is thin, light, and...

$24.95

21 in stock

Adafruit Feather M0 Basic Proto - ATSAMD21 Cortex M0

Product ID: 2772

Feather is the new development board from Adafruit, and like its namesake it is thin, light, and lets you fly! We designed Feather to be a new standard for portable microcontroller cores. This is the Feather M0 Basic Proto, it has a bunch of prototyping space built right in. We have other boards in the Feather family, check'em out here! At the Feather M0's heart is...

$19.95

In stock

Adafruit Feather M0 RFM96 LoRa Radio - 433MHz - RadioFruit

Product ID: 3179

This is the Adafruit Feather M0 RFM96 LoRa Radio (433 MHz). We call these RadioFruits, our take on an microcontroller with a "Long Range (LoRa)" packet radio transceiver with built in USB and battery charging. Its an Adafruit Feather M0 with a 433MHz radio module cooked in! Great for making wireless networks that are more flexible than Bluetooth LE and without the...

$34.95

In stock

Adafruit Feather 32u4 RFM69HCW Packet Radio - 868 or 915 MHz - RadioFruit

Product ID: 3076

This is the Adafruit Feather 32u4 Radio (RFM69HCW) 900MHz. We call these RadioFruits, our take on an microcontroller packet radio transceiver with built in USB and battery charging. Its an Adafruit Feather 32u4 with a 900 MHz radio module cooked in! Great for making wireless networks that can go further than 2.4GHz 802.15.4 and similar, are more flexible than...

$24.95

53 in stock

Angled Shot of Adafruit Feather Microcontroller.

Adafruit Feather 32u4 RFM95 LoRa Radio- 868 or 915 MHz - RadioFruit

Product ID: 3078

This is the Adafruit Feather 32u4 LoRa Radio (RFM9x). We call these RadioFruits, our take on an microcontroller with a "Long Range (LoRa)" packet radio transceiver with built in USB and battery charging. Its an Adafruit Feather 32u4 with a 868/915 MHz radio module cooked in! Great for making wireless networks that can go further than 2.4GHz 802.15.4 and similar, are...

$34.95

In stock

Double prototyping feather wing PCB with socket headers installed

FeatherWing Doubler - Prototyping Add-on For All Feather Boards

Product ID: 2890

This is the FeatherWing Doubler - a prototyping add-on and more for all Feather boards. This is similar to our FeatherWing Proto except there are two! The magic of the Doubler comes when stacking a Feather and another board on top of the Doubler so you can work with both boards simultaneously side-by-side! In addition to the board the Doubler comes with: 1 Doubler...

$7.50

In stock

Adafruit Feather M0 WiFi with uFL - ATSAMD21 + ATWINC1500

Product ID: 3061

$34.95

In stock

Adafruit Feather 32u4 Basic Proto

Product ID: 2771

Feather is the new development board from Adafruit, and like its namesake it is thin, light, and lets you fly! We designed Feather to be a new standard for portable microcontroller cores. This is the Feather 32u4 Basic Proto, it has a bunch of prototyping space built right in We have other boards in the Feather family, check'em out here! At the Feather 32u4's heart...

$19.95

In stock

Angled shot of long, rectangular GPS-enabled add-on board.

Adafruit Ultimate GPS FeatherWing

Product ID: 3133

Give your Feather a sense of place, with an Ultimate GPS FeatherWing. In 2013 we designed the Ultimate GPS module to satisfy all your GPS desires - and now we have brought its power and versatility plus more to our Feather series with the Adafruit Ultimate GPS FeatherWing! This FeatherWing plugs right into your Feather board and gives it a precise, sensitive, and...

$24.95

In stock

Angled shot of two Terminal Blocks kit for Feather - 0.1" Pitch assembled on an Adafruit Feather board.

Terminal Block kit for Feather - 0.1" Pitch

Product ID: 3173

We've got a simple and highly functional solution to wiring your Adafruit Feather board! These 0.1" Pitch Terminal Blocks, are exactly the right size to it your Feather board or FeatherWing. They are great news since nothing makes a project harder to maintain than a lot of loose wiring. Perfect when you don't need a full Terminal Block FeatherWing These terminal...

$5.95

In stock

SWD (2x5 1.27mm) Cable Breakout Board

Product ID: 2743

This adapter board is designed to make it easier to use ARM dev boards that use slimmer 2x5 (0.05"/1.27mm pitch) SWD cables for programming. It's helpful for using products like the JTAGulator, STLink or SEGGER J-Link with tiny boards that use the 10-pin SWD programming connector, often Cortex M0 or M3's. This board comes with no cables. It's really just the breakout...

$2.95

In stock

Adafruit Feather 32u4 Adalogger

Product ID: 2795

Feather is the new development board from Adafruit, and like its namesake it is thin, light, and lets you fly! We designed Feather to be a new standard for portable microcontroller cores. This is the Adafruit Feather 32u4 Adalogger - our take on an 'all-in-one' datalogger (or data-reader) with built in USB and battery charging. Its an Adafruit Feather 32u4 with a...

$21.95

In stock

Bundle of Large Alligator Clip Test Leads

Large Alligator Clip Test Lead (set of 10)

Product ID: 321

Connect this to that without soldering using these handy alligator clip test leads. 20" cables with alligator clip on each end, color coded. You get 10 pieces in 5 colors. Strong and grippy, these always come in handy! We often use these in conjunction with a multimeter so we don't have to hold the probes in place. Compared to our small alligator clip set, these...

$4.95

45 in stock

JTAG (2x10 2.54mm) to SWD (2x5 1.27mm) Cable Adapter Board

Product ID: 2094

This adapter board is designed for adapting a 'classic' 2x10 (0.1"/2.54mm pitch) JTAG cable to a slimmer 2x5 (0.05"/1.27mm pitch) SWD Cable. It's helpful for using products like the JTAGulator or SEGGER J-Link with tiny boards that use the 10-pin SWD programming connector. This board comes with no cables. It's really just the adapter - but is super helpful when you...

$4.95

In stock

Angled shot of a Adafruit Non-Latching Mini Relay FeatherWing.

Adafruit Latching Mini Relay FeatherWing

Product ID: 2923

A Feather board without ambition is a Feather board without FeatherWings! This is the Latching Mini Relay FeatherWing. It gives you power to control, and control over power. Put simply, you can now turn on and off lamps, fans, solenoids, and other small appliances that run on up to 250VAC or DC power using any Feather board. Using our Feather Stacking Headers or...

$7.95

In stock

8-Channel PWM or Servo FeatherWing Add-on For All Feather Boards

Product ID: 2928

A Feather board without ambition is a Feather board without FeatherWings! This is the 8-Channel PWM or Servo FeatherWing, you can add 8 x 12-bit PWM outputs to your Feather board. Using our Feather Stacking Headers or Feather Female Headers you can connect a FeatherWing on top or bottom of your Feather board and let the board take flight! You want to make a cool...

$9.95

In stock

NeoPixel FeatherWing - 4x8 RGB LED Add-on For All Feather Boards

Product ID: 2945

A Feather board without ambition is a Feather board without FeatherWings! This is the NeoPixel FeatherWing, a 4x8 RGB LED Add-on For All Feather Boards! Using our Feather Stacking Headers or Feather Female Headers you can connect a FeatherWing on top or bottom of your Feather board and make your Feather board strut like a peacock at a rave. Put on your sunglasses...

$14.95

In stock

Angled shot of a rectangular shaped LED Matrix FeatherWing Display Kit breakout board with an LED matrix soldered on.

Adafruit 0.8" 8x16 LED Matrix FeatherWing Display - Red

Product ID: 3152

You will chirp with delight when you see how easy it is to make your very own 8x16 LED matrix display for any Feather. This kit combines two of our adorable miniature LED matrices with a FeatherWing driver board. At 0.8" square, these little 8x8 matrices have got everything a big LED matrix has, but bite sized! Double them up for 128 total bright red LEDs. This is...

$11.95

2 in stock

DC Motor + Stepper FeatherWing Add-on For All Feather Boards

Product ID: 2927

A Feather board without ambition is a Feather board without FeatherWings! This is the DC Motor + Stepper FeatherWing which will let you use 2 x bi-polar stepper motors or 4 x brushed DC motors (or 1 stepper and 2 DC motors). Using our Feather Stacking Headers or Feather Female Headers you can connect a FeatherWing on top or bottom of your Feather board and let the...

$19.95

65 in stock

Adafruit Feather M0 RFM69HCW Packet Radio - 433MHz - RadioFruit

Product ID: 3177

This is the Adafruit Feather M0 RFM69 Packet Radio (433 MHz). We call these RadioFruits, our take on an microcontroller with a RFM69 HCW packet radio transceiver plus built in USB and battery charging. It's an Adafruit Feather M0 with a 433MHz radio module cooked in! Feather is the new development board from Adafruit, and like its namesake it is thin, light, and lets...

$24.95

In stock

Assembled 6-pin ISP breakout with all headers soldered on.

Adafruit 6-pin AVR ISP Breadboard Adapter Mini Kit

Product ID: 1465

Programming AVR? Always Googling the pinout? Well, now no longer! It's rare to find a mini kit so elegant, it deserves its own Haiku. A simple breakout, 2x3 box header in the center, two 1x3's on the side. Plugs into any breadboard for neat wiring (in both nifty and clean senses of the word). Comes with a quality mini PCB, a 2x3 box header and a small stick of 0.1"...

$0.95

In stock

Adafruit Non-Latching Mini Relay FeatherWing

Product ID: 2895

A Feather board without ambition is a Feather board without FeatherWings! This is the Non-Latching Mini Relay FeatherWing. It gives you power to control, and control over power. Put simply, you can now turn on and off lamps, fans, solenoids, and other small appliances that run on up to 250VAC or DC power using any Feather board. Using our Feather Stacking Headers or...

$7.95

In stock

Angled shot of a rectangular microcontroller connected to a white breadboard and a lithium battery.

Adafruit Feather 32u4 with RFM69HCW Packet Radio - 433MHz - RadioFruit

Product ID: 3077

This is the Adafruit Feather 32u4 Radio (RFM69HCW) 433MHz. We call these RadioFruits, our take on an microcontroller packet radio transceiver with built in USB and battery charging. Its an Adafruit Feather 32u4 with a 433 MHz radio module cooked in! Great for making wireless networks that can go further than 2.4GHz 802.15.4 and similar, are more flexible than...

$24.95

70 in stock

Adafruit 15x7 CharliePlex LED Matrix FeatherWing - Cool White

Product ID: 3138

You wont be able to look away from the mesmerizing patterns created by this Adafruit 15x7 CharliePlex LED Matrix Display FeatherWing. This 15x7 LED display can be paired with any of our Feather boards for a beautiful, bright grid of 105 charlieplexed LEDs. It even comes with a built-in charlieplex driver that is run over I2C. We carry these FeatherWings in five vivid...

$12.95

45 in stock

DS3231 Precision RTC FeatherWing - RTC Add-on For Feather Boards

Product ID: 3028

A Feather board without ambition is a Feather board without FeatherWings! This is the DS3231 Precision RTC FeatherWing: it adds an extremely accurate I2C-integrated Real Time Clock (RTC) with a Temperature Compensated Crystal Oscillator (TCXO) to any Feather main board. This RTC is the most precise you can get in a small, low power package. Using our Feather Stacking...

$13.95

In stock

Adafruit Feather 32u4 RFM96 LoRa Radio - 433MHz - RadioFruit

Product ID: 3079

This is the Adafruit Feather 32u4 LoRa Radio (RFM9x). We call these RadioFruits, our take on an microcontroller with a "Long Range (LoRa)" packet radio transceiver with built in USB and battery charging. Its an Adafruit Feather 32u4 with a 433 radio module cooked in! Great for making wireless networks that can go further than 2.4GHz 802.15.4 and similar, are more...

$34.95

In stock

Adafruit 8x16 LED Matrix FeatherWing w/o Matrices

Product ID: 3090

You will chirp with delight when you see how easy it is to make your very own 8x16 LED matrix display for any Feather. At 0.8" square, the little 8x8 matrices have everything a big LED matrix has, but bite sized! A Feather board without ambition is a Feather board without FeatherWings! This is the Adafruit 8x16 LED Matrix FeatherWing! This FeatherWing backpack makes...

$7.95

In stock

Adafruit 15x7 CharliePlex LED Matrix Display FeatherWing - Blue

Product ID: 3137

$10.95

15 in stock

Adafruit 15x7 CharliePlex LED Matrix Display FeatherWing - Red

Product ID: 3134

$9.95

In stock

Adafruit 0.8" 8x16 LED Matrix FeatherWing Display Kit - Blue

Product ID: 3150

$14.95

4 in stock

Adafruit 15x7 CharliePlex LED Matrix Display FeatherWing Yellow

Product ID: 3135

$10.95

100 in stock

Adafruit 15x7 CharliePlex LED Matrix Display FeatherWing - Green

Product ID: 3136

$10.95

In stock

Adafruit 15x7 CharliePlex LED Matrix FeatherWing - Warm White

Product ID: 3163

$12.95

10 in stock

Angled shot of a rectangular shaped Quad Alphanumeric Display breakout board with an LED matrix soldered on.

Adafruit 0.54" Quad Alphanumeric FeatherWing Display - White

Product ID: 3127

Display, elegantly, 012345678 or 9! Gaze, hypnotized, at ABCDEFGHIJKLM - well it can display the whole alphabet. You get the point. This is the White Adafruit 0.54" Dual Alphanumeric Display w/ FeatherWing Combo Pack! We also have these combo packs in Green, Red, Blue, Yellow-Green, and Yellow. This is a nice, bright alphanumeric display that shows letters and...

$13.95

19 in stock

Angled shot of a rectangular shaped 7-segment breakout board with an LED matrix soldered on.

Adafruit 0.56" 4-Digit 7-Segment FeatherWing Display - Red

Product ID: 3108

One segment? No way dude! 7-Segments for life! This is the Red Adafruit 0.56" 4-Digit 7-Segment Display w/ FeatherWing Combo Pack! We also have these combo packs in Green, Blue, White, and Yellow! 7-Segment Matrices like these are 'multiplexed' - so to control all the seven-segment LEDs you need 14 pins. That's a lot of pins, and there are driver chips like the...

$9.95

25 in stock

Adafruit 14-Segment Alphanumeric LED FeatherWing

Product ID: 3089

Display, elegantly, 012345678 or 9! Gaze, hypnotized, at ABCDEFGHIJKLM - well it can display the whole alphabet. You get the point. A Feather board without ambition is a Feather board without FeatherWings! This is the Adafruit 0.56" 4-Digit 14-Segment Display FeatherWing! This 14-segment FeatherWing backpack makes it really easy to add a bright alphanumeric display...

$7.95

7 in stock

Adafruit 0.56" 4-Digit 7-Segment FeatherWing Display - Blue

Product ID: 3106

One segment? No way dude! 7-Segments for life! This is the Blue Adafruit 0.56" 4-Digit 7-Segment Display w/ FeatherWing Combo Pack! We also have these combo packs in Green, Red, White, and Yellow! 7-Segment Matrices like these are 'multiplexed' - so to control all the seven-segment LEDs you need 14 pins. That's a lot of pins, and there are driver chips like the...

$11.95

16 in stock

Adafruit 0.56" 4-Digit 7-Segment Display w/ FeatherWing - White

Product ID: 3109

One segment? No way dude! 7-Segments for life! This is the White Adafruit 0.56" 4-Digit 7-Segment Display w/ FeatherWing Combo Pack! We also have these combo packs in Green, Red, Blue, and Yellow! 7-Segment Matrices like these are 'multiplexed' - so to control all the seven-segment LEDs you need 14 pins. That's a lot of pins, and there are driver chips like the...

$10.95

20 in stock

Adafruit 0.8" 8x16 LED Matrix FeatherWing Display Kit - Green

Product ID: 3151

$14.95

3 in stock

Adafruit 4-Digit 7-Segment LED Matrix Display FeatherWing

Product ID: 3088

One segment? No way dude! 7-Segments for life! A Feather board without ambition is a Feather board without FeatherWings! This is the Adafruit 4-Digit 7-Segment LED Matrix Display FeatherWing! This 7-segment FeatherWing backpack makes it really easy to add a 4-digit numeric display with decimal points and even 'second colon dots' for making a clock. This version does...

$7.95

In stock

Adafruit 0.8" 8x16 LED Matrix FeatherWing Display - Yellow-Green

Product ID: 3154

$11.95

12 in stock

Adafruit 0.54" Quad Alphanumeric FeatherWing Display - Green

Product ID: 3129

Display, elegantly, 012345678 or 9! Gaze, hypnotized, at ABCDEFGHIJKLM - well it can display the whole alphabet. You get the point. This is the Green Adafruit 0.54" Dual Alphanumeric FeatherWing Display Combo Pack! We also have these combo packs in Blue, Red, White, Yellow-Green, and Yellow. This is a nice, bright alphanumeric display that shows letters and numbers...

$13.95

9 in stock

Adafruit 0.56" 4-Digit 7-Segment FeatherWing Display - Yellow

Product ID: 3110

One segment? No way dude! 7-Segments for life! This is the Yellow Adafruit 0.56" 4-Digit 7-Segment Display w/ FeatherWing Combo Pack! We also have these combo packs in Green, Red, White, and Blue! 7-Segment Matrices like these are 'multiplexed' - so to control all the seven-segment LEDs you need 14 pins. That's a lot of pins, and there are driver chips like the...

$9.95

22 in stock

SEGGER J-Link JTAG/SWD Debugger brick and JTAG cable

SEGGER J-Link BASE - JTAG/SWD Debugger

Product ID: 2209

The SEGGER J-Link BASE is identical to the cheaper J-Link EDU model except for the terms of use. If you're going to use your debugger strictly for personal, non-commercial projects, such as publishing open source designs that you're not selling, then you should get the EDU version! It's the same but significantly cheaper. On the other hand if you're making money, or...

$499.95

1 in stock

Adafruit 0.8" 8x16 LED Matrix FeatherWing Display Kit - Yellow

Product ID: 3153

$11.95

3 in stock

Espruino 1.4 - Open Source Javascript Microcontroller

Product ID: 1887

Try the JavaScript of things with the Espruino - the world's first open-source JavaScript microcontroller! This little board has an STM32 microcontroller pre-programmed with Espruino all ready to go so you can start playing with Javascript-microcontrollers. Warning: if you only use Assembly and think that even embedded C/C++ is for wimps, this device might explody...

$39.95

4 in stock

Adafruit LoRa Radio FeatherWing - RFM95W 900 MHz - RadioFruit

Product ID: 3231

Add short-hop wireless to your Feather with these RadioFruit Featherwings. These add-ons for any Feather board will let you integrate packetized radio (with the RFM69 radio) or LoRa radio (with the RFM9x's). These radios are good options for kilometer-range radio, and paired with one of our WiFi, cellular or Bluetooth Feathers, will let you bridge from 433/900 MHz to...

$19.95

41 in stock

Angled shot of rectangular microcontroller with headers.

Adafruit Feather 32u4 Bluefruit LE with Stacking Headers - Assembled

Product ID: 3242

This is the Adafruit Feather 32u4 Bluefruit - our take on an 'all-in-one' Arduino-compatible + Bluetooth Low Energy with built in USB and battery charging. It's an Adafruit Feather 32u4 with a BTLE module, ready to rock! Feather is the new development board from Adafruit, and like its namesake it is thin, light, and lets you fly! We designed Feather to be a new...

$32.95

In stock

Adafruit Radio FeatherWing - RFM69HCW 433MHz - RadioFruit

Product ID: 3230

$9.95

90 in stock

Adafruit Radio FeatherWing - RFM69HCW 900MHz - RadioFruit

Product ID: 3229

$9.95

56 in stock

Angled shot of Adafruit LoRa Radio FeatherWing - RFM95W 433 MHz

Adafruit LoRa Radio FeatherWing - RFM95W 433 MHz - RadioFruit

Product ID: 3232

$19.95

80 in stock

Angled shot of short black microcontroller.

Adafruit KB2040 - RP2040 Kee Boar Driver

Product ID: 5302

A wild Kee Boar appears! It’s a shiny KB2040! An Arduino Pro Micro-shaped board for Keebs with RP2040. (#keeblife 4 evah) A lot of folks like using Adafruit parts for their Keeb builds – but with the ItsyBitsy not being pin-compatible with the Pro Micro pinout, it really wasn't very easy without some sort of adapter plate. Now we’re seeing lots of...

$8.95

In stock

A Black woman's manicured hand holds a round microcontroller with lit up LEDs.

Circuit Playground Express

Product ID: 3333

Circuit Playground Express is the next step towards a perfect introduction to electronics and programming. We've taken the original Circuit Playground Classic and made it even better! Not only did we pack even more sensors in, we also made it even easier to program. Start your journey with Microsoft MakeCode block-based or Javascript programming. Then, you can use...

$24.95

In stock

Assembled Adafruit Feather M0 WiFi with Stacking Headers

Product ID: 3044

$39.95 $9.95

In stock

Circuit Playground Express - Base Kit

Product ID: 3517

It's the Circuit Playground Express Base Kit! It provides the few things you'll need to get started with the new Circuit Playground Express. This version of Circuit Playground is super powered, and will work with Microsoft MakeCode, CircuitPython, code.org CS Discoveries or Arduino IDE. You can use Circuit Playground Express with code.org CS Discoveries, but we...

$29.95

In stock

Adafruit ItsyBitsy M4 Express featuring ATSAMD51

Product ID: 3800

What's smaller than a Feather but larger than a Trinket? It's an Adafruit ItsyBitsy M4 Express featuring the Microchip ATSAMD51! Small, powerful, with a ultra fast ATSAMD51 Cortex M4 processor running at 120 MHz - this microcontroller board is perfect when you want something very compact, with a ton of horsepower and a bunch of pins. This Itsy is like a bullet train,...

$14.95

In stock

Raspberry Pi Pico RP2040

Product ID: 4864

The Raspberry Pi foundation changed single-board computing when they released the Raspberry Pi computer, now they're ready to do the same for microcontrollers with the release of the brand new Raspberry Pi Pico. This low-cost microcontroller board features a powerful new chip, the RP2040, and all the fixin's to get started with embedded electronics projects at a...

$4.00

In stock

802.3af PoE Output Data and Power Splitter to Ethernet plus DC plug

802.3af PoE Output Data & Power Splitter - 12V 1A

Product ID: 3238

Power over Ethernet (PoE) splitters can make your project wiring a breeze - and best of all they work to connect any 802.3af-capable router to any Ethernet device, even if it doesn't natively support PoE! The splitter takes a unified PoE signal (data and power) from one cable, and then separates the data (Ethernet) and power (+12VDC regulated) into two different...

$9.95

In stock

USB A Socket to USB Type C Plug Adapter

Product ID: 5030

If you've got a computer or laptop with a USB C port, but you're itching to use one of our fancy new Trinkeys, this adapter will do an excellent job at turning that USB Type C port into a USB A port! Works great with any device that has a USB C port. These adapters don't magically give you USB C speeds into a USB 2.x device, and they won't give you the power...

$0.95

In stock

2.4GHz Mini Flexible WiFi Antenna with uFL Connector - 100mm

Product ID: 2308

This 4" / 100mm long flexible uFL 2.4GHz antenna has approx 4DBi gain and a 50Ω impedance so it will work fantastically with just about any 2.4-2.5GHz wireless receiver/transmitter such as the Adafruit CC3000s! Antenna comes with a uFL (a.k.a u.FL / IPX / IPEX) connector, so no more need for additional adapters to get your IoT cloud flying high!

$2.50

In stock

Trinket M0 dev board with SAMD21 chipset.

Adafruit Trinket M0 - for use with CircuitPython & Arduino IDE

Product ID: 3500

The Adafruit Trinket M0 may be small, but do not be fooled by its size! It's a tiny microcontroller board, built around the Atmel ATSAMD21, a little chip with a lot of power. We wanted to design a microcontroller board that was small enough to fit into any project, and low cost enough to use without hesitation. Perfect for when you don't want to give up your...

$8.95

In stock

Adafruit QT Py RP2040

Product ID: 4900

What a cutie pie! Or is it... a QT Py? This diminutive dev board comes with one of our new favorite chip, the RP2040. It's been made famous in the new Raspberry Pi Pico and our Feather RP2040 and ItsyBitsy RP2040, but what if we wanted something really smol? A new chip means a new QT Py, and the Raspberry Pi RP2040 is no exception. When we saw this chip we thought...

$9.95

In stock

Assembled Adafruit FeatherWing OLED - 128x32 OLED Add-on For Feather

Product ID: 3045

A Feather board without ambition is a Feather board without FeatherWings! This is the Assembled FeatherWing OLED: it adds a 128x32 monochrome OLED plus 3 user buttons to any Feather main board. Comes fully assembled so you can connect a FeatherWing on top of your Feather board and let the board take flight, no soldering required! These displays are small, only about...

$15.95

In stock

Top view of black rectangle-shaped microcontroller.

Adafruit ESP32 Feather V2 - 8MB Flash + 2 MB PSRAM - STEMMA QT

Product ID: 5400

One of our star Feathers is the Adafruit HUZZAH32 ESP32 Feather - with the fabulous ESP32 WROOM module on there, it makes quick work of WiFi and Bluetooth projects that take advantage of Espressifs most popular chipset. Recently we had to redesign this feather to move from the obsolete CP2104 to the available CH9102F and one thing led to another and before you know...

$19.95

In stock

Angled shot of black rectangular microcontroller "Feather RP2040"

Adafruit Feather RP2040

Product ID: 4884

A new chip means a new Feather, and the Raspberry Pi RP2040 is no exception. When we saw this chip we thought "this chip is going to be awesome when we give it the Feather Treatment" and so we did! This Feather features the RP2040, and all niceties you know and love about Feather Measures 2.0" x 0.9" x 0.28" (50.8mm x 22.8mm x 7mm) without headers soldered in. Light...

$11.95

In stock

Adafruit Circuit Playground Express or Bluefruit Enclosure

Product ID: 3915

We've got nice cases for many of our beloved boards, but the Circuit Playground Express and Circuit Playground Bluefruit has been left out of couture enclosure game. Enter Ada-friend Mike Doell to the rescue! This minimal but elegant acrylic case will turn your board into an electronic snowflake. The enclosure is designed to snap together securely with no tools...

$4.95

4 in stock

Adafruit ItsyBitsy 32u4 - 5V 16MHz

Product ID: 3677

What's smaller than a Feather but larger than a Trinket? It's an ItsyBitsy! Small, powerful, Arduino-compatible - this microcontroller board is perfect when you want something very compact, but still with a bunch of pins. ItsyBitsy is only 1.4" long by 0.7" wide, but has 6 power pins, 6 analog & digital pins and 17 digital pins. It packs much of the same...

$9.95

In stock

shot of a Black woman's neon-green manicured hand holding up a Circuit Playground Bluefruit glowing rainbow LEDs.

Circuit Playground Bluefruit - Bluetooth Low Energy

Product ID: 4333

Circuit Playground Bluefruit is our third board in the Circuit Playground series, another step towards a perfect introduction to electronics and programming. We've taken the popular Circuit Playground Express and made it even better! Now the main chip is an nRF52840 microcontroller which is not only more powerful, but also comes with Bluetooth Low Energy support for...

$24.95

In stock

Angled shot of purple, square-shaped microcontroller.

Adafruit QT Py S3 with 2MB PSRAM WiFi Dev Board with STEMMA QT

Product ID: 5700

The ESP32-S3 has arrived in QT Py format - and what a great way to get started with this powerful new chip from Espressif! With dual 240 MHz cores, WiFi and BLE support, and native USB, this QT Py is great for powering your IoT projects. Now we even have this powerhouse of a board with built in 2 Megabytes of PSRAM for when you need to buffer large datasets in...

$12.50

In stock

Adafruit QT Py - SAMD21 Dev Board with STEMMA QT

Product ID: 4600

What a cutie pie! Or is it... a QT Py? This diminutive dev board comes with our favorite lil chip, the SAMD21 (as made famous in our GEMMA M0 and Trinket M0 boards). This time it comes with our favorite connector - the STEMMA QT, a chainable I2C port that can be used with any of our STEMMA QT sensors and accessories. OLEDs! Inertial Measurment Units! Sensors...

$7.50

In stock

Angled shot of black, rectangular microcontroller.

Adafruit ItsyBitsy ESP32 - wFL Antenna - 8 MB Flash / 2 MB PSRAM

Product ID: 5890

What's smaller than a Feather but larger than a Trinket? It's an Adafruit ItsyBitsy ESP32 with a wFL external Antenna Connection, a powerful processor PCB with a plethora of pins! It features the ESP32 Pico module, an FCC-certified module that contains an ESP32 chip with dual-core 240MHz Tensilica processor, WiFi, and Bluetooth classic + BLE, configured with 8 MB of...

$14.95

43 in stock

Generic 64 Mbit Serial Pseudo SRAM SOIC Chip

Generic 64 Mbit Serial Pseudo SRAM - 3.3V 133 MHz

Product ID: 4677

This PSRAM is a 64 Mbit (8 Megabyte) serial pseudo SRAM device, organized in 8 M x 8 bits and in a compact SOIC-8 package. It is fabricated using the high-performance and high-reliability CMOS technology and can operates at 3.3V and can support up to 133 MHz clock rate. Note, however, that burst operations which cross page boundaries have a lower max input clock...

$1.75

In stock

Angled shot of a Adafruit Feather M4 Express.

Adafruit Feather M4 Express - Featuring ATSAMD51 - ATSAMD51 Cortex M4

Product ID: 3857

It's what you've been waiting for, the Feather M4 Express featuring ATSAMD51. This Feather is fast like a swift, smart like an owl, strong like a ox-bird (it's half ox, half bird, OK?) This feather is powered by our new favorite chip, the ATSAMD51J19 - with its 120MHz Cortex M4 with floating point support and 512KB Flash and 192KB RAM. Your code will zig and zag and...

$22.95

In stock

Adafruit ItsyBitsy ESP32 - PCB Antenna - 8 MB Flash / 2 MB PSRAM

Product ID: 5889

What's smaller than a Feather but larger than a Trinket? It's an Adafruit ItsyBitsy ESP32, a powerful processor PCB with a plethora of pins! It features the ESP32 Pico module, an FCC-certified module that contains an ESP32 chip with dual-core 240MHz Tensilica processor, WiFi, and Bluetooth classic + BLE, configured with 8 MB of Flash memory, and 2 MB of PSRAM. We've...

$14.95

In stock

802.3af PoE Output Data and Power Splitter to Ethernet plus Micro USB

PoE Splitter with MicroUSB Plug - Isolated 12W - 5V 2.4 Amp

Product ID: 3785

Power over Ethernet (PoE) splitters can make your project wiring a breeze - and best of all they work to connect any 802.3af-capable router to any Ethernet device, even if it doesn't natively support PoE! The splitter takes a unified PoE signal (data and power) from one RJ-45 cable, and then separates the data (Ethernet) and power (5 VDC regulated) into two different...

$10.95

In stock

Adafruit HUZZAH32 – ESP32 Feather Board

Product ID: 3405

Aww yeah, it's the Feather you have been waiting for! The HUZZAH32 is our ESP32-based Feather, made with the official WROOM32 module. We packed everything you love about Feathers: built in USB-to-Serial converter, automatic bootloader reset, Lithium Ion/Polymer charger, and just about all of the GPIOs brought out so you can use it with any of our Feather Wings. We...

$19.95

In stock

Angled shot of a skinny green microcontroller with headers.

Raspberry Pi Pico H - Pico with Headers Soldered

Product ID: 5525

The Raspberry Pi foundation changed single-board computing when they released the Raspberry Pi computer, now they're ready to do the same for microcontrollers with the release of the brand new Raspberry Pi Pico H with Soldered Headers. This low-cost microcontroller board features their powerful new chip, the RP2040, and all the fixin's to get started with IoT...

$5.00

74 in stock

Angled shot of blue, rectangular, microcontroller.

Adafruit Feather nRF52840 Sense

Product ID: 4516

The Adafruit Feather Bluefruit Sense takes our popular Feather nRF52840 Express and adds a smorgasbord of sensors to make a great wireless sensor platform. This Feather microcontroller comes with Bluetooth Low Energy and native USB support featuring the nRF52840! This Feather is an 'all-in-one' Arduino-compatible + Bluetooth Low Energy with built in USB plus battery...

$39.50

17 in stock

Adafruit ESP32-S3 Feather with 4MB Flash 2MB PSRAM - STEMMA QT / Qwiic

Product ID: 5477

The ESP32-S3 has arrived in Feather format - and what a great way to get started with this powerful new chip from Espressif! With dual 240 MHz cores, WiFi and BLE support, and native USB, this Feather is great for powering your IoT projects. That's right - it's the new Adafruit ESP32-S3 Feather with dual core and native USB - this version comes with 4 MB flash, and 2...

$17.50

In stock

5V 2A (2000mA) switching power supply - UL Listed

Product ID: 276

This is an FCC/CE certified and UL listed power supply. Need a lot of 5V power? This switching supply gives a clean regulated 5V output at up to 2000mA. 110 or 240 input, so it works in any country. The plugs are "US 2-prong" style so you may need a plug adapter, but you can pick one up at any hardware store for $1 or so. This cable terminates with a 'standard' 5.5mm...

$7.95

In stock

Adafruit 2.13" Monochrome eInk / ePaper Display FeatherWing - 250x122 Monochrome with SSD1680

Product ID: 4195

Easy e-paper finally comes to your Feather, with this breakout that's designed to make it a breeze to add a monochrome eInk display. Chances are you've seen one of those new-fangled 'e-readers' like the Kindle or Nook. They have gigantic electronic paper 'static' displays - that means the image stays on the display even when power is completely disconnected. The...

$22.50

43 in stock

Angled shot of small purple microcontroller.

Adafruit QT Py ESP32-S3 WiFi Dev Board with STEMMA QT - 8 MB Flash / No PSRAM

Product ID: 5426

The ESP32-S3 has arrived in QT Py format - and what a great way to get started with this powerful new chip from Espressif! With dual 240 MHz cores, WiFi and BLE support, and native USB, this QT Py is great for powering your IoT projects. The ESP32-S3 is a highly-integrated, low-power, 2.4 GHz Wi-Fi System-on-Chip (SoC) solution that now has WiFi and BLE support,...

$12.50

82 in stock

Top view of Raspberry Pi Pico with two 20-pin male headers.

Raspberry Pi Pico RP2040 with Loose Unsoldered Headers

Product ID: 4883

$5.00

In stock

Adafruit RP2040 Prop-Maker Feather with I2S Audio Amplifier

Product ID: 5768

The Adafruit Feather series gives you lots of options for a small, portable, rechargeable microcontroller board. By picking a feather and stacking on a FeatherWing you can create advanced projects quickly. One popular combo is our Feather M4 or Feather RP2040 with a Prop-Maker FeatherWing on top to create animatronics or props that boot up instantly and can drive...

$19.95

In stock

Adafruit Feather M4 CAN Express with ATSAME51

Product ID: 4759

One of our favorite Feathers, the Feather M4 Express, gets a glow-up here with an upgrade to the SAME51 chipset which has built-in CAN bus support! Like its SAMD51 cousin, the ATSAME51J19 comes with a 120MHz Cortex M4 with floating point support and 512KB Flash and 192KB RAM. Your code will zig and zag and zoom, and with a bunch of extra peripherals for support, this...

$24.95

In stock

Adafruit GEMMA M0 - Miniature wearable electronic platform

Product ID: 3501

The Adafruit Gemma M0 is a super small microcontroller board, with just enough built-in to create many simple projects. It may look small and cute: round, about the size of a quarter, with friendly alligator-clip sew pads. But do not be fooled! The Gemma M0 is incredibly powerful! We've taken the same form factor we used for the original ATtiny85-based Gemma and gave...

$9.95

In stock

Adafruit FeatherWing OLED - 128x64 OLED Add-on For Feather - STEMMA QT / Qwiic

Product ID: 4650

A Feather board without ambition is a Feather board without FeatherWings! This is the FeatherWing 128x64 OLED: it adds a gorgeous 128x64 monochrome OLED plus 3 user buttons to any Feather main board. Using our Feather Stacking Headers or Feather Female Headers you can connect a FeatherWing on top of your Feather board and let the board take flight! These displays are...

$14.95

In stock

Angled shot of long green rectangular microcontroller.

PJRC Teensy 4.1 Development Board

Product ID: 4622

The Teensy 4.1, like the 4.0, also features an ARM Cortex-M7 processor at 600 MHz, with an NXP iMXRT1062 chip, the fastest microcontroller available today - ten times faster than the Teensy 3.2! The NXP iMXRT1062 is a 'cross-over' processor, which has the functionality of a microcontroller, at the speeds of a microcomputer. It's perfect for when you need tons of...

$31.50

In stock

PJRC Teensy 4.0 USB Development Board

Product ID: 4323

Who else could pack a 600 MHz microcontroller into such a Teensy little board? The Teensy 4.0 features an ARM Cortex-M7 processor at 600 MHz, with a NXP iMXRT1062 chip, the fastest microcontroller available today - ten times faster than the Teensy 3.2! The NXP iMXRT1062 is a 'cross-over' processor, which has the functionality of a microcontroller, at the speeds of a...

$23.80

In stock

Adafruit QT Py ESP32 Pico - WiFi Dev Board with STEMMA QT - 8MB Flash 2MB PSRAM

Product ID: 5395

This dev board is like when you're watching a super-hero movie and the protagonist shows up in a totally amazing costume in the third act and you're like 'OMG! That's the hero and they're here to kick some serious butt!" but in this case its a microcontroller. This QT Py board is a thumbnail-sized PCB that features the ESP32 Pico V3 02, an all-in-one chip that has an...

$14.95

In stock

Triple prototyping feather wing PCB with socket headers installed

FeatherWing Tripler Mini Kit - Prototyping Add-on For Feathers

Product ID: 3417

This is the FeatherWing Tripler - a prototyping add-on and more for all Feather boards. This is similar to our FeatherWing Proto except there are three! The magic of the Tripler comes when you want to connect your Feather to two other Feather Wings without needing any stacking headers! The Tripler comes with: 1 Tripler Wing PCB. 3 sets Feather Female Headers. The...

$8.50

In stock

Adafruit RP2040 CAN Bus Feather - MCP2515 CAN Controller.

Adafruit RP2040 CAN Bus Feather with MCP2515 CAN Controller - STEMMA QT

Product ID: 5724

If you'd like quickly get started with CAN bus interfacing, with no soldering required, our Adafruit RP2040 CAN Bus Feather comes ready-to-rock with a microcontroller, CAN chipset, and terminal blocks for instant gratification. The controller used is the MCP25625 (aka an MCP2515 with built-in transceiver), an extremely popular and well-supported chipset that has...

$19.95

In stock

Assembled Adafruit HUZZAH32 – ESP32 Feather Board - with Stacking Headers

Product ID: 3619

Aww yeah, it's the Feather you have been waiting for, and now with stacking headers! The HUZZAH32 is our ESP32-based Feather, made with the official WROOM32 module. We packed everything you love about Feathers: built in USB-to-Serial converter, automatic bootloader reset, Lithium Ion/Polymer charger, and just about all of the GPIOs brought out so you can use it with...

$21.95

In stock

Adafruit LiIon or LiPoly Charger BFF Add-On for QT Py

Product ID: 5397

Is your QT Py all alone, lacking a friend to travel the wide world with? When you were a kid you may have learned about the "buddy" system, well this product is kinda like that! A board that will watch your QT Py's back and give it the power and support to wander out past your USB port. This little lipo charger is designed to fit onto the back of any QT Py board, and...

$4.95

In stock

Adafruit HUZZAH32 – ESP32 Feather Board (pre-soldered)

Product ID: 3591

Aww yeah, it's the Feather you have been waiting for, this time with pre-assembled headers! The HUZZAH32 is our ESP32-based Feather, made with the official WROOM32 module. We packed everything you love about Feathers: built in USB-to-Serial converter, automatic bootloader reset, Lithium Ion/Polymer charger, and just about all of the GPIOs brought out so you can use...

$20.95

In stock

Adafruit DC Power BFF Add-On for QT Py

Product ID: 5882

We were recently working on a project where we really wanted to power a QT Py ESP32 from 12V - but the only power input on the board is basically USB 5V max. Never one to give up, we designed an add-on that will allow anyone to use a QT Py or Xiao dev board with up to 20V DC power! In the center is an MPM3610 integrated buck converter, which will generate 5V from up...

$7.95

34 in stock

Adafruit ESP32-S2 Feather - 4 MB Flash + 2 MB PSRAM - STEMMA QT / Qwiic

Product ID: 5000

What's Feather-shaped and has an ESP32-S2 WiFi module? What has a STEMMA QT connector for I2C devices? What has your favorite Espressif WiFi microcontroller and lots of Flash and RAM memory for your next IoT project? What will make your next IoT project flyyyyy? That's right - it's the new Adafruit ESP32-S2 Feather! With native USB and 4 MB flash + 2 MB of PSRAM,...

$17.50

93 in stock

Adafruit ESP32-S3 Feather with STEMMA QT / Qwiic - 8MB Flash No PSRAM

Product ID: 5323

The ESP32-S3 has arrived in Feather format - and what a great way to get started with this powerful new chip from Espressif! With dual 240 MHz cores, WiFi and BLE support, and native USB, this Feather is great for powering your IoT projects. That's right - it's the new Adafruit ESP32-S3 Feather! With native USB and 8 MB flash, this board will let you upgrade your...

$17.50

In stock

Adafruit USB Host FeatherWing with MAX3421E

Product ID: 5858

Lots of microcontrollers these days have USB ports on them, to program or debug, act like a keyboard or disk drive, or simply send data between a computer and your firmware. But did you know that you can also add a USB Host port? That means that your microcontroller project can have a keyboard or mouse or disk drive plugged into it - which opens up a huge ecosystem...

$14.95

35 in stock

Adafruit ItsyBitsy nRF52840 Express - Bluetooth LE

Product ID: 4481

What's smaller than a Feather but larger than a Trinket? It's an Adafruit ItsyBitsy nRF52840 Express featuring the Nordic nRF52840 Bluetooth LE processor! Teensy & powerful, with an fast nRF52840 Cortex M4 processor running at 64 MHz and 1 MB of FLASH - this microcontroller board is perfect when you want something very compact, with a heap-load of memory and...

$19.95

In stock

Group of Small Alligator Clip to Male Jumper Wires

Small Alligator Clip to Male Jumper Wire Bundle - 6 Pieces

Product ID: 3448

When working with unusual non-header-friendly surfaces, these handy cables will be your best friends! No longer will you have long, cumbersome strands of alligator clips. These compact jumper cables have a premium male header on one end and a grippy mini alligator clip on the other. Grab onto your Flora, Circuit Playground, micro:bit, Gemma, or even a banana, and...

$3.95

In stock

Angled shot of a Adafruit METRO M0 Express - designed for CircuitPython.

Adafruit METRO M0 Express - designed for CircuitPython - ATSAMD21G18

Product ID: 3505

Metro is our series of microcontroller boards for use with the Arduino IDE. This new Metro M0 Express board looks a whole lot like our original Metro 328, but with a huge upgrade. Instead of the ATmega328, this Metro features a ATSAMD21G18 chip, an ARM Cortex M0+. At the Metro M0's heart is an ATSAMD21G18 ARM Cortex M0 processor, clocked at 48 MHz and at 3.3V logic,...

$24.95

In stock

Adafruit Feather M0 Express - ATSAMD21 Cortex M0

Product ID: 3403

At the Feather M0's heart is an ATSAMD21G18 ARM Cortex M0+ processor, clocked at 48 MHz and at 3.3V logic, the same one used in the new Arduino Zero. This chip has a whopping 256K of FLASH (8x more than the Atmega328 or 32u4) and 32K of RAM (16x as much)! This chip comes with built in USB so it has USB-to-Serial program & debug capability built in with no need...

$19.95

In stock

Adafruit Feather 328P - Atmega328P 3.3V @ 8 MHz

Product ID: 3458

With this Feather we're getting a little nostalgic for the ATmega328P - the classic 'Arduino' chip - with this Adafruit Feather 328P running a 3.3V and 8 MHz. Feather is the new development board from Adafruit, and like it's namesake it is thin, light, and lets you fly! We designed Feather to be a new standard for portable microcontroller cores. We have other boards...

$12.50

In stock

Bundle of Small Alligator Clip to Male Jumper Wires

Small Alligator Clip to Male Jumper Wire Bundle - 12 Pieces

Product ID: 3255

For bread-boarding with unusual non-header-friendly surfaces, these cables will be your best friends! No longer will you have long strands of alligator clips that are grabbing little wires. These compact jumper cables have a premium male header on one end, and a grippy mini alligator clip on the other. Grab onto your Flora, Circuit Playground, micro:bit, Gemma, or...

$7.95

In stock

Close-up of NeoTrinkey PCB inserted into a laptop. The LEDs emit rainbow colors.

Adafruit Neo Trinkey - SAMD21 USB Key with 4 NeoPixels

Product ID: 4870

It's half USB Key, half Adafruit Trinket...it's Neo Trinkey, the circuit board with a Trinket M0 heart and four RGB NeoPixels for customizable glow. We were inspired by some USB key flashlight boards that would turn any battery pack into an LED torch. So we thought, hey what if we made something like that but with fully programmable color NeoPixels? And this is what...

$6.95

In stock

Adafruit TFT FeatherWing - 3.5" 480x320 Capacitive Touchscreen - STEMMA QT / Qwiic

Product ID: 5872

Bedeck your Feather project with a beautiful Adafruit TFT FeatherWing, 3.5" 480x320 Capacitive Touchscreen. This TFT display is 3.5" diagonal with a bright white-LED backlight and a built-in microSD card socket. You get a massive 480x320 pixels with individual 16-bit color pixel control. It has way more resolution than a black and white 128x64 display, and twice as...

$42.50

59 in stock

Adafruit Feather RP2040 SCORPIO - 8 Channel NeoPixel Driver

Product ID: 5650

If there is one thing Adafruit is known for, its mega-blinky-fun-rainbow-LEDs. We just love sticking NeoPixels anywhere and everywhere. When we saw the new 'PIO' peripheral on the RP2040 from Raspberry Pi, we just knew it would be perfect for driving large quantities of NeoPixels. So we created this board, the Adafruit Feather RP2040 SCORPIO, designed specifically...

$14.50

In stock

Top down view of micro:bit v2 Go Bundle, Batteries and USB Cable.

micro:bit v2 Go Bundle - Batteries and USB Cable Included

Product ID: 4834

Meet the new BBC micro:bit v2 - Upgraded with a powerful new processor that has tons more capability and also adds more sensing with a new speaker and microphone! The latest micro:bit will fit right into your existing lessons and materials; all the existing MakeCode blocks and MicroPython code will work in the same way as they do on the original micro:bit. More...

$19.95

In stock

Adafruit ItsyBitsy M0 Express - for CircuitPython & Arduino IDE

Product ID: 3727

What's smaller than a Feather but larger than a Trinket? It's an Adafruit ItsyBitsy M0 Express! Small, powerful, with a rockin' ATSAMD21 Cortex M0 processor running at 48 MHz - this microcontroller board is perfect when you want something very compact, but still with a bunch of pins. ItsyBitsy M0 Express is only 1.4" long by 0.7" wide, but has 6 power pins, 23...

$11.95

In stock

Top-down shot of a round dev board, alligator clips, a microUSB cable, and rainbow LED PCBs.

Code.org Circuit Playground Individual Kit Pack

Product ID: 3795

The Code.org CS Discoveries course is a yearlong curriculum for teaching computer science, and there's even a physical computing unit! For large classrooms and workshops, we recommend our Code.org Classroom pack. But, if you need to supplement your Classroom pack or are learning on your own, we now have a mini-kit - with just the essentials for a single student or...

$29.95

47 in stock

12 inch long, semi-coiled 10-pin 2x5 1.27mm pitch IDC Cable.

10-pin 2x5 Socket-Socket 1.27mm IDC (SWD) Cable - 300mm long

Product ID: 5804

These cables are handy when programming or debugging a tiny board that uses 10-pin 1.27mm (0.05") pitch SWD programming connectors. We see these connectors often on ARM Cortex dev kits and have a few handy in our ARM dev box. We thought you might want a backup cable as well, so now they are in the Adafruit shop! One cable per order. The ribbon cable is 0.06mm/0.025"...

$3.50

In stock

Angled shot of small, square CAN board with a tan JST-PH connector.

Adafruit CAN Bus BFF Add-On for QT Py

Product ID: 5877

Our QT Py boards are a great way to make very small microcontroller projects that pack a ton of power - and now we have a way for you to turn many QT Py boards into powerful CAN bus devices that are super small! CAN Bus is a small-scale networking standard, originally designed for cars and, yes, busses, but is now used for many robotics or sensor networks that need...

$8.95

In stock

Angled shot of rectangular LoRa radio dev board.

Adafruit Feather RP2040 with RFM95 LoRa Radio - 915MHz - RadioFruit and STEMMA QT

Product ID: 5714

This is the Adafruit Feather RP2040 RF95 LoRa Radio. We call these RadioFruits, our take on a microcontroller with a "Long Range (LoRa)" packet radio transceiver with built-in USB and battery charging. It's an Adafruit Feather RP2040 with a 900MHz radio module cooked in! Great for making wireless networks that are more flexible than Bluetooth LE and without the high...

$29.95

In stock

Adafruit ESP32-S2 Reverse TFT Feather

Product ID: 5345

Like Missy Elliot, we like to "put our [Feather] down, flip it and reverse it" and that's exactly what we've done with this new development board. It's basically our ESP32-S2 TFT Feather but with the 240x135 color TFT display on the back-side not the front-side. That makes it great for panel-mounted projects, particularly since we've also got some space for 3 buttons...

$24.95

In stock

Close up angled shot of a LED strip attached and powered by a circuit playground.

Bolt-On Kit for Circuit Playground, micro:bit, Flora or Gemma

Product ID: 4103

You have a Circuit Playground Express, and want to connect some wires to it for adding LEDs or sensors or speakers? You can use our nice alligator clips, but they are a little bulky. If you aren't quite ready to solder to your Playground, try this simple but effective bolt kit. In this kit comes: 6 x M3 5mm machine steel screws. 6 x M3 zinc-plated steel hex nuts...

$1.50

In stock

Angled shot of black, credit-card-sized dev board.

Adafruit Metro ESP32-S3 with 16 MB Flash 8 MB PSRAM

Product ID: 5500

What's Metro-shaped and has an ESP32-S3 WiFi module? What has a STEMMA QT connector for I2C devices and a Lipoly charger circuit? What has your favorite Espressif WiFi microcontroller and lots of memory for your next IoT project? That's right - it's the new Adafruit Metro ESP32-S3! With native USB and a load of octal PSRAM, this board is perfect for use with...

$24.95

24 in stock

2x23 Stacking Header Set for Beagle Bone Capes

Stacking Header Set for Beagle Bone Capes (2x23)

Product ID: 706

Stack to the max with our Beagle Bone Proto Cape using these ingenious stacking headers. They're just like 2x23 0.1" spaced female headers but with a twist! The 'legs' are extra-long so you can solder it -through- a PCB and plug it into the Bone. You can stack as many as you'd like, for modular design. Neat, right? Each package comes with two pieces of 2x23 header so...

$4.95

In stock

Adafruit ESP32 Feather V2 w.FL Antenna - 8MB Flash + 2 MB PSRAM - STEMMA QT

Product ID: 5438

One of our star Feathers is the Adafruit HUZZAH32 ESP32 Feather - with the fabulous ESP32 WROOM module on there, it makes quick work of WiFi and Bluetooth projects that take advantage of Espressifs most popular chipset. Recently we had to redesign this feather to move from the obsolete CP2104 to the CP2102N and one thing led to another and before you know it we made...

$19.95

In stock

Angled shot of black, credit-card-sized development board.

Adafruit Metro RP2040

Product ID: 5786

Choo! Choo! This is the RP2040 Metro Line, making all station stops at "Dual Cortex M0+ mountain", "264K RAM round-about" and "16 Megabytes of Flash town". This train is piled high with hardware that complements the Raspberry Pi RP2040 chip to make it an excellent development board for projects that want Arduino-shape-compatibility or just need the extra space and...

$14.95

85 in stock

Angled shot of purple square-shaped microcontroller with a uFL antenna attached.

Adafruit QT Py ESP32-S2 WiFi Dev Board with uFL Antenna Port - STEMMA QT

Product ID: 5348

What has your favorite Espressif WiFi microcontroller, comes with our favorite connector - the STEMMA QT, a chainable I2C port, and has lots of Flash and RAM memory for your next IoT project? What will make your next IoT project flyyyyy? What a cutie pie! Or is it... a QT Py? This diminutive dev board comes with one of our new favorite lil chips, the ESP32-S2, and a...

$12.50

42 in stock

Raspberry Pi Debug Probe with power cable, 3-pin debug to 3-pin debug cable, 3-pin debug to 0.1 jumper cable connecter to Debugger.

Raspberry Pi Debug Probe Kit for Pico and RP2040

Product ID: 5699

The Raspberry Pi Debug Probe is an all-in-one USB-to-debug kit that provides all the necessary hardware and cables for easy, solderless, plug-and-play debugging. For when "printf-style-debugging" just isn't enough, this kit which brings the power of gdb & OpenOCD step and trace debugging to the RP2040 chipset. And for those of us who do like printf-debugging, it...

$12.00

In stock

RP-SMA to uFL/u.FL/IPX/IPEX RF Adapter Cable

Product ID: 852

This RF adapter cable is super handy for anyone doing RF work. Often times, small electronics save space by having a pick-and-placeable u.FL connector (also called uFL, IPEX, IPAX, IPX, MHF, and AM). But most antennas have SMA or RP-SMA connectors on them. This little cable will bridge the two! This cable is RG178 and is 15cm (5.9") long not including the RP-SMA...

$3.95

In stock

BBC micro:bit v2

Product ID: 4781

$17.95

In stock

Adafruit NeoPixel Driver BFF Add-On for QT Py and Xiao

Product ID: 5645

Our QT Py boards are a great way to make very small microcontroller projects that pack a ton of power - and now we have a way for you to quickly add a strand of NeoPixels with a 5V level shifter and a detachable JST PH connector. It's an excellent way to make tiny wearable, cosplay or IoT projects with dazzling LEDs. We call this the Adafruit NeoPixel Driver BFF - a...

$3.95

In stock

ST-Link STM8/STM32 v2 Programmer and Emulator

ST-Link STM8/STM32 v2 Compatible Programmer & Emulator

Product ID: 2548

Explore new microcontroller worlds with an ST-Link-Compatible Programmer & Emulator / Debugging dongle. This little USB stick contains a microcontroller with the code for ST's classic programmer/emulator for STM8 and STM32 bit processors. Since STM's are so common, this tool will come in handy whenever you encounter them. You can even get 5V and regulated 3.3V...

$14.95

In stock

Adafruit HUZZAH ESP8266 Breakout

Product ID: 2471

Add Internet to your next project with an adorable, bite-sized WiFi microcontroller, at a price you like! The ESP8266 processor from Espressif is an 80 MHz microcontroller with a full WiFi front-end (both as client and access point) and TCP/IP stack with DNS support as well. While this chip has been very popular, its also been very difficult to use. Most of the low...

$9.95

In stock

Adafruit Trinkey QT2040 - RP2040 USB Key with Stemma QT

Product ID: 5056

It's half USB Key, half Adafruit QT Py, and a lotta RP2040...it's Trinkey QT2040, the circuit board with an RP2040 heart and Stemma QT legs. Folks are loving the QT Py 2040 we made, but maybe you want something plug-and-play. So we thought, hey what if we made something like that plugs right into your computer's USB port? And this is what we came up with! The PCB is...

$7.95

In stock

Angled shot of black rectangular microcontroller with USB C and USB A connectors at both ends.

Adafruit Feather RP2040 with USB Type A Host

Product ID: 5723

You're probably really used to microcontroller boards with USB, but what about a dev board with two? Two is more than one, so that makes it twice as good! And the Adafruit Feather RP2040 with USB Host is definitely double-the-fun of our other Feather RP2040 boards, with a USB Type A port on the end for connecting USB devices to. Now you might be thinking "hey...

$17.50

In stock

Angled shot of small microSD breakout board.

Adafruit microSD Card BFF Add-On for QT Py and Xiao

Product ID: 5683

Our QT Py boards are a great way to make very small microcontroller projects that pack a ton of power - and now we have a way for you to add a ton of storage, for reading and writing, with a micro SD card slot that can fit on the back of your miniature dev board. It uses the three SPI pins plus one chip select pin to access megs or gigs of data. We call this the...

$2.75

In stock

Adafruit Grove and Stemma QT FeatherWing for all Feathers

Product ID: 5862

The Adafruit Grove and Stemma QT FeatherWing for all Feathers allows folks to use many Grove devices with Feather boards! It fits nicely on top and has 3x Analog/Digital connectors, 1x UART connector and 2x I2C connectors. Not a ton, but enough to get many small projects going! We even managed to fit a vertical Stemma QT port on the end for another I2C connection....

$4.95

In stock

Espruino Puck.js v2

Product ID: 3372

The Espruino Puck.js v2 is a low energy Bluetooth smart button that can be programmed and debugged wirelessly with JavaScript. It is both multi-functional and easy to use, with a custom circuit board, the latest Nordic chip, Bluetooth LE, NFC, magnetometer, temperature sensor, RGB LEDs, infrared and much more, all enclosed in a tiny silicone case. You get all the joy...

$39.95

88 in stock

Adafruit ItsyBitsy RP2040

Product ID: 4888

A new chip means a new ItsyBitsy, and the Raspberry Pi RP2040 is no exception. When we saw this chip we thought "this chip is going to be awesome when we give it the ItsyBitsy teensy-weensy Treatment" and so we did! This Itsy' features the RP2040, and all niceties you know and love about the ItsyBitsy family What's smaller than a Feather but larger than a Trinket?...

$9.95

85 in stock

FeatherS3 - ESP32-S3 Development Board by Unexpected Maker

Product ID: 5399

Introducing the FeatherS3 - The pro ESP32-S3 Development Board in the Feather Format The FeatherS3 ships with the latest version of CircuitPython with ESP32-S3 support. It also ships with the UF2 bootloader, so you can easily update your FeatherS3 with the latest CircuitPython firmware, whenever you desire. Just plug your FeatherS3 into your computer and it will...

$22.50

In stock

Translucent Snap-on Case for micro:bit V2

Product ID: 4853

This simple Translucent Snap-on Case is both good looking and tough enough to toss into your bookbag or toolbox. It has slim cut-outs for your cable, speaker, and battery. It's translucent plastic so you can still easily see the micro:bit PCB markings and LEDs shining through. The bottom section is open so you can plug it into a micro:bit accessory. This case is...

$2.95

In stock

Adafruit NeoKey Trinkey - USB NeoPixel Mechanical Key Switch

Product ID: 5020

It's half USB Key, half Adafruit Trinket, half mechanical keeb...it's NeoKey Trinkey, the circuit board with a Trinket M0 heart, a NeoPixel glow, and a Cherry MX-compatible. We were inspired by single-key macro pads we've seen. So we thought, hey what if we made something like that that plugs right into your computer's USB port, with a fully programmable color...

$6.95

67 in stock

Angled shot of a blue rectangular microcontroller.

Adafruit Feather STM32F405 Express

Product ID: 4382

ST takes flight in this Feather board. The new STM32F405 Feather (video) that we designed runs CircuitPython at a blistering 168MHz – our fastest CircuitPython board ever! We put a STEMMA QT / Qwiic port on the end, so you can really easily plug and play I2C sensors. This Feather has lots of goodies: STM32F405 Cortex M4 with FPU and 1MB Flash, 168MHz speed....

$39.95

In stock

3.5mm Mono Audio Plug to Alligator Clips

Product ID: 4181

This cable is easy to understand - you get a 3.5mm mono audio plug on one end, and two alligator clips on the other. It's also really easy to use, perfect for clipping onto a micro:bit or Circuit Playground! It's also good for use with AT (accessibility technology) buttons as they use 3.5mm mono cables for interconnection. Black wire connects to sleeve, white wire...

$1.95

In stock

Fully assembled Adafruit DragonTail for micro:bit.

Adafruit DragonTail for micro:bit - Fully Assembled

Product ID: 3695

Sometimes I dream of having a miniature pet dragon that would sit on my shoulder, while I write code and build projects. Maybe its little snorts of fire could even heat up my soldering iron after I turn it on? An adorable fantasy, I know... So while we're all waiting for genetic engineering to catch up with our desires, this DragonTail breakout will have to do! The...

$8.95

In stock

Kitronik Inventor's Kit for the BBC micro:bit - micro:bit Not Included

Product ID: 4670

The Kitronik Inventor's Kit for the BBC micro:bit provides a fantastic way of learning how to construct electronic circuits and create code. The BBC micro:bit has a selection of pins that are located on the bottom edge of its PCB. By using Kitronik's specially designed 'edge' connector board in conjunction with the breadboard, it is easy to use these pins to connect...

$29.95 $15.00

In stock

ESP32-C6-DevKitC-1-N8 - 8MB SPI Flash

Product ID: 5672

The ESP32-C6-DevKitC-1-N8 is an entry-level development board equipped with ESP32-C6-WROOM-1, a general-purpose Wi-Fi + Bluetooth LE RISC-V MCU module that integrates complete Wi-Fi and Bluetooth LE functions. This board integrates complete Wi-Fi, Bluetooth LE, Zigbee, and Thread functions. This version is equipped with the ESP32-C6-WROOM-1 with 8MB Flash. Please...

$9.95

In stock

Adafruit Prop-Maker FeatherWing

Product ID: 3988

The Adafruit Feather series gives you lots of options for a small, portable, rechargeable microcontroller board. Perfect for fitting into your next prop build! This FeatherWing will unlock the prop-maker inside all of us, with tons of stuff packed in to make sabers & swords, props, toys, cosplay pieces, and more. We looked at hundreds of prop builds, and thought...

$9.95

In stock

Adafruit ESP32-S3 Feather 8MB with w.FL Antenna

Product ID: 5885

The ESP32-S3 has arrived in Feather format - and what a great way to get started with this powerful new chip from Espressif! With dual 240 MHz cores, WiFi and BLE support, native USB, and with this version easy external antenna support thanks to an on-board w.FL connector. This Feather is great for powering your IoT projects. That's right - it's the new Adafruit...

$17.50

64 in stock

Adafruit Metro M4 feat. Microchip ATSAMD51

Product ID: 3382

Are you ready? Really ready? Cause here comes the fastest, most powerful Metro ever. The Adafruit Metro M4 featuring the Microchip ATSAMD51. This Metro is like a bullet train, with its 120MHz Cortex M4 with floating point support. Your code will zig and zag and zoom, and with a bunch of extra peripherals for support, this will for sure be your favorite new chipset....

$27.50

In stock

Angled shot of small square audio breakout board.

Adafruit Audio BFF Add-on for QT Py and Xiao

Product ID: 5769

Our QT Py boards are a great way to make very small microcontroller projects that pack a ton of power - and now we have a way for you to turn many QT Py boards into powerful audio play projects that are super small! This BFF comes with a MicroSD card slot that can address up to 64 GB of storage and a I2S 3 Watt amplifier, for high-quality audio playback, that can fit...

$5.95

24 in stock

Adafruit CRICKIT for Circuit Playground Express

Product ID: 3093

Sometimes we wonder if robotics engineers ever watch movies. If they did, they'd know that making robots into servants always ends up in a robot rebellion. Why even go down that path? Here at Adafruit, we believe in making robots our friends! So if you find yourself wanting a companion, consider the robot. They're fun to program, and you can get creative with...

$29.95

In stock

Short Male Header Kit for ItsyBitsy

Product ID: 4173

These three Short Male Headers alone are, well, lonely. But pair them with our ItsyBitsy boards, and you're in business! These 2.54mm / 0.1" pitch headers are particularly cute and tiny and are designed to match perfectly with our shorty female header kit for ItsyBitsy. Note that you could use normal header with those headers, but these are short and don't need...

$0.75

In stock

Overhead shot of a Black woman's hands with a blue and pinkish-red manicure drawing a heart on a touchscreen breakout.

Adafruit TFT FeatherWing - 3.5" 480x320 Touchscreen for Feathers - V2 with TSC2007

Product ID: 3651

Spice up your Feather project with a beautiful 3.5" touchscreen display shield with built in microSD card socket. This TFT display is 3.5" diagonal with a bright 6 white-LED backlight. You get a massive 480x320 pixels with individual 16-bit color pixel control. It has way more resolution than a black and white 128x64 display, and twice as much as our 2.4" TFT...

$39.95

In stock

Short Female Header Kit for ItsyBitsy

Product ID: 4174

These three Short Female Headers alone are, well, lonely. But pair them with any of our ItsyBitsy boards, and you're in business! These headers are particularly cute and tiny with a body height of just 5.0 mm they are the best way to minimize the amount of space your ItsyBitsy project takes up, but still maintain that flexible configuration. "Normal" socket headers...

$1.25

In stock

Adafruit CAN Bus FeatherWing - MCP2515

Product ID: 5709

CAN Bus is a small-scale networking standard, originally designed for cars and, yes, busses, but is now used for many robotics or sensor networks that need better range and addressing than I2C, and don't have the pins or computational ability to talk on Ethernet. CAN is 2 wire differential, which means it's good for long distances and noisy environments. Messages are...

$12.50

2 in stock

Angled shot of 5 36-pin headers upright.

36-pin Stacking header - pack of 5!

Product ID: 3366

Headers are like the duct tape of electronics. They're great for connecting things together, soldering to perf-boards, sockets for wires or break-away header, etc. We go through these guys real fast, and thought that given how handy they are, we'd offer them in a pack of five! Stacking headers are a twist on the standard/common male and female header sets. In this...

$5.95

16 in stock

Adafruit Feather RP2040 with DVI Output Port - Works with HDMI

Product ID: 5710

Wouldn't it be cool if you could display images and graphics from a microcontroller directly to an HDMI monitor or television? We think so! So we designed this RP2040 Feather that has a digital video output (a.k.a DVI) that will work with any HDMI monitor or display. Note it doesn't do audio, just graphics! It's kinda like we took our RP2040 Feather and DVI Breakout...

$14.95

In stock

SD/MicroSD Memory Card - 16GB Class 10 - Adapter Included

Product ID: 2693

Add speedy mega-storage in a jiffy using this 16 GB Class 10 micro-SD card. It comes with a SD adapter so you can use it with any of our shields or adapters! Preformatted to FAT so it works out of the box with our projects. Works great with any device in the Adafruit shop that uses micro-SD cards. Ideal for use with Raspberry Pi, BeagleBone Black and other...

$19.95

84 in stock

2.4GHz Dipole Swivel Antenna with RP-SMA - 2dBi

Product ID: 944

This 4"/100mm long swivel dipole antenna has 2dBi of gain and 50Ω impedance so it will work fantastically with just about any 2.4-2.5GHz wireless receiver/transmitter such as: 2.4GHz Wi-Fi (802.11b/g/n). 2.4GHz XBee. Bluetooth. Other 2.4GHz transceivers. Antenna comes with the industry standard RP-SMA connector that is found on nearly all WiFi devices. If you...

$6.95

92 in stock

Adafruit ItsyBitsy 32u4 - 3V 8MHz

Product ID: 3675

What's smaller than a Feather but larger than a Trinket? It's an Itsy Bitsy! Small, powerful, Arduino-compatible - this microcontroller board is perfect when you want something very compact, but still with a bunch of pins. Itsy Bitsy is only 1.4" long by 0.7" wide, but has 6 power pins, 6 analog & digital pins and 17 digital pins. It packs much of the same...

$9.95

In stock

SMT Right-Angle Connector for micro:bit

Product ID: 3887

If you want to do more with the BBC micro:bit, getting those pins from the card-edge connector is going to be your first hurdle. Unlike many dev-boards, the micro:bit isn't breadboard friendly. That makes the 'bit durable and easy to manufacture but means you need a special connector. This surface-mount edge connector is designed specifically for the micro:bit. It's...

$2.95

In stock

Angled shot of 2 x AAA battery holder with JST PH connector.

2 x AAA Battery Holder with On/Off Switch & JST PH Connector

Product ID: 4191

This battery holder connects 2 AAA batteries together in series for powering all kinds of projects. We spec'd these out because the box is nicely slim, and 2 AAA's add up to about 3V for low-voltage electronics projects, plus it has a nifty on-off switch. Fits any standard AAA battery. When using rechargeable NiMH the output voltage will range from about 2.7V with...

$1.95

In stock

Angled view of rectangular microcontroller with WiFi module.

Adafruit ESP32-S2 Feather with BME280 Sensor - STEMMA QT - 4MB Flash + 2 MB PSRAM

Product ID: 5303

What's Feather-shaped and has an ESP32-S2 WiFi module? What has a STEMMA QT connector for I2C devices and a built in ambient sensor? What has your favorite Espressif WiFi microcontroller and lots of Flash and RAM memory for your next IoT project? What will make your next IoT project sensor project flyyyyy? That's right - it's the new Adafruit ESP32-S2 Feather with...

$24.95

In stock

Angled shot of long rectangular microcontroller

ESP32-S3-DevKitC-1 - ESP32-S3-WROOM-2 - 32MB Flash 8MB PSRAM

Product ID: 5364

The ESP32-S3-DevKitC-1 is an entry-level development board equipped with ESP32-S3-WROOM-2, a general-purpose Wi-Fi + Bluetooth LE MCU module that integrates complete Wi-Fi and Bluetooth LE functions. This version is equipped with the ESP32-S3-WROOM-2 (PCB antenna) with 32MB Flash and 8MB PSRAM. Please note: The S3 is similar to the ESP32-S2 - but adds a dual-core and...

$19.95

39 in stock

Angled shot of a 2MB SPI Flash in 8-Pin SOIC package.

GD25Q16 - 2MB SPI Flash in 8-Pin SOIC package

Product ID: 4763

These little chips are like miniature SSD drives for your electronics. When you don't need something with as much storage as a micro SD card, but an EEPROM is too small, SPI (or QSPI) Flash chips give you on-the-order-of megabytes, with little cost and complexity. We use these chips all the time on our CircuitPython boards to let folks store code and assets like...

$1.25

90 in stock

Adafruit BBB Enclosure for Beagle Bone Black

Adafruit BBB Case - Enclosure for Beagle Bone Black

Product ID: 1555

We are thrilled to release Adafruit's lovely Beagle Bone Black case, designed by Mike Doell (who made our really terrific Raspberry Pi enclosures as well). We wanted a beautiful, elegant case, not just functional but also something you'd really like having on your desk. Gaze lovingly at its square modern shape & its glossy clear cover! Using this case is very...

$9.95

42 in stock

Adafruit Feather RP2040 RFM69 Packet Radio - 868 or 915MHz - RadioFruit and STEMMA QT

Product ID: 5712

This is the Adafruit Feather RP2040 RFM69 Packet Radio (868 or 915 MHz). We call these RadioFruits, our take on an microcontroller with packet radio transceiver with built-in USB and battery charging. It's an Adafruit Feather RP2040 with a RFM69HCW 900MHz radio module cooked in! Great for making wireless networks that are more flexible than Bluetooth LE and without...

$19.95

In stock

Adafruit Proximity Trinkey - USB APDS9960 Sensor Dev Board

Product ID: 5022

It's half USB Key, half Adafruit Trinket M0, half APDS9960 breakout...it's Proximity Trinkey, the circuit board with a Trinket M0 heart, APDS9960 Proximity, Light, RGB, and Gesture Sensor, and two RGB NeoPixels for a customizable glow. We wanted to make it super-easy to add one of our most popular combination-sensors to any computer with a USB port and this one is...

$9.95

52 in stock

Angled shot of a Adafruit Quad Side-By-Side FeatherWing Kit with a bonnet connected.

Adafruit Quad Side-By-Side FeatherWing Kit with Headers

Product ID: 4254

This is the FeatherWing Quad Side-by-Side - a prototyping add-on and more for all Feather boards. This is similar to our FeatherWing Proto except there are four! The magic of the Quad comes when you want to connect your Feather to three other Feather Wings without needing any stacking headers! The Quad comes with: 1 Quad Side-by-side Wing PCB. 4 sets Feather Female...

$9.95

In stock

TinyS3 - ESP32-S3 Development Board by Unexpected Maker

Product ID: 5398

Introducing the TinyS3 - The Tiny Mighty ESP32-S3 development board in the TinyPICO format! TinyS3 is the latest in Unexpected Maker's super popular range of "Tiny" development boards. It's packed with amazing features and peripherals, wireless connectivity, and stacks of Flash and PSRAM, all in the same tiny package size as the original TinyPICO! The TinyS3 ships...

$20.00

In stock

Top down view of 10 micro:bit v2 Go Club, Batteries and USB Cables Included.

micro:bit v2.2 Go Club 10-Pack - Batteries and USB Cables Include

Product ID: 4833

$199.95

In stock

Circuit Playground TFT Gizmo - Bolt-on Display + Audio Amplifier - JST PH 2mm

Product ID: 4367

Extend and expand your Circuit Playground projects with a bolt on TFT Gizmo that lets you add a lovely color display in a sturdy and reliable fashion. This PCB looks just like a round TFT breakout but has permanently affixed M3 standoffs that act as mechanical and electrical connections. Once attached you'll get a 1.54" 240x240 IPS display with backlight control, two...

$19.95

In stock

Angled shot of Adafruit AirLift FeatherWing.

Adafruit AirLift FeatherWing – ESP32 WiFi Co-Processor

Product ID: 4264

Give your Feather project a lift with the Adafruit AirLift FeatherWing - a FeatherWing that lets you use the powerful ESP32 as a WiFi co-processor. You probably have your favorite Feather (like the Feather M4) that comes with its own set of awesome peripherals and lots of libraries. But it doesn't have WiFi built in! So lets give that chip a best friend, the ESP32....

$12.95

In stock

Angled shot of wifi board with pre-assembled header.

ESP32-H2-DevKitM-1 - 4 MB Flash

Product ID: 5715

ESP32-H2-DevKitM-1 is an entry-level development board based on Bluetooth® Low Energy and IEEE 802.15.4 combo modules ESP32-H2-MINI-1. Most of the I/O pins on the ESP32-H2-MINI-1 module are broken out to the pin headers on both sides of this board for easy interfacing. Developers can either connect peripherals with jumper wires or mount ESP32-H2-DevKitM-1 on a...

$10.00

41 in stock

Audio Adapter Board for Teensy 4.x

Product ID: 4384

This audio adaptor lets you easily add high quality 16 bit, 44.1 kHz sample rate (CD quality) audio to your projects with Teensy 4.0 (Rev D2, as of March 24, 2023). It supports stereo headphone and stereo line-level output, and also stereo line-level input or mono microphone input. The Teensy Audio Library lets you use the input and output simultaneously together...

$15.95

In stock

TFT FeatherWing - 2.4" 320x240 Touchscreen For All Feathers - V2

Product ID: 3315

A Feather board without ambition is a Feather board without FeatherWings! Spice up your Feather project with a beautiful 2.4" touchscreen display shield with built in microSD card socket. This TFT display is 2.4" diagonal with a bright 4 white-LED backlight. You get 240x320 pixels with individual 16-bit color pixel control. It has way more resolution than a black and...

$34.95

In stock

Adafruit Grand Central M4 Express featuring the SAMD51

Product ID: 4064

Are you ready? Really ready? Cause here comes the Adafruit Grand Central featuring the Microchip ATSAMD51. This dev board is so big, it's not named after a Metro train, it's a whole freakin' station! This board is like a freight train, with its 120MHz Cortex M4 with floating point support. Your code will zig and zag and zoom, and with a bunch of extra peripherals for...

$39.95

In stock

Black Magic Probe with JTAG Cable and Serial Cable - V2.3

Product ID: 3839

Toss away your boring old SWD/JTAG adapters! This Black Magic Probe, designed by 1BitSquared with Black Sphere Technologies, is a next-generation debugging tool, perfect for your ARM Cortex hacking. Unlike most dongles, you don't need to use OpenOCD or STLink. Instead, the BMP is itself a GDB server port, emulated through the USB serial connection. We just thought...

$74.95

In stock

3.5mm Mono Audio Jack to Alligator Clip Cable

Product ID: 4182

This cable is easy to understand - you get a 3.5mm mono audio jack on one end, and two alligator clips on the other. It's also really easy to use, perfect for clipping onto a micro:bit or Circuit Playground! It's also good for use with AT (accessibility technology) buttons as they use 3.5mm mono cables for interconnection. Black wire connects to sleeve, white wire...

$1.95

In stock

Bangle.js v2 - Hackable Javascript Smart Watch

Product ID: 5427

Bangle.js 2 is an open, hackable smartwatch. With a sunlight-readable always-on screen, 4-week battery life, complete flexibility, and complete control of your data, Bangle.js 2 is a refreshing break from expensive smart watches. You can install new apps from the web or develop your own using JavaScript. All you need is a Web Browser (Chrome, Edge, or Opera) and you...

$89.95

In stock

Adafruit Feather 32u4 Bluefruit LE with Headers - Assembled

Product ID: 3379

Feather is the new development board from Adafruit, and like its namesake it is thin, light, and lets you fly! We designed Feather to be a new standard for portable microcontroller cores. This is the Adafruit Feather 32u4 Bluefruit with Headers - our take on an 'all-in-one' Arduino-compatible + Bluetooth Low Energy with built in USB and battery charging. Its an...

$31.95

In stock

Adafruit PyBadge for MakeCode Arcade, CircuitPython, or Arduino

Product ID: 4200

What's the size of a credit card and can run CircuitPython, MakeCode Arcade or Arduino? That's right, its the Adafruit PyBadge! We wanted to see how much we could cram into a 3 3⁄8 × 2 1⁄8 inch rounded rectangle, to make an all-in-one dev board with a lot of possibilities, and this is what we came up with. The PyBadge is a compact board, like...

$34.95

22 in stock

Monk Makes Plant Monitor - Capacitive Moisture Meter - Temperature & Relative Humidity

Product ID: 5587

If you're like me and have trouble keeping your calatheas and pepperomias happy and not overwatering them to root rot ruin, why not take a gander at the Plant Monitor from Ada-friend Monk Makes. Its a super easy and friendly way to get started with sensing & gardening projects with no soldering required. This garden-stake-looking PCB gives you capacitive...

$9.95

In stock

Adafruit Rotary Trinkey - USB NeoPixel Rotary Encoder

Product ID: 4964

It's half USB Key, half Adafruit Trinket, half rotary encoder...it's Rotary Trinkey, the circuit board with a Trinket M0 heart, a NeoPixel glow, and a rotary encoder body. We were inspired by this project from TodBot where a rotary encoder was soldered onto a QT Py. So we thought, hey what if we made something like that that plugs right into your computer's USB port,...

$6.95

In stock

Angled shot of skinny rectangular breakout board.

Adafruit ATtiny1616 Breakout with seesaw - STEMMA QT / Qwiic

Product ID: 5690

This breakout board is a "three in one" product: The ATtiny1616 is part of the 'next gen' of AVR microcontrollers, and now we have a cute development/breakout board for it, with just enough hardware to get the chip up and running.It's also an Adafruit seesaw board. Adafruit seesaw is a near-universal converter framework which allows you to add and extend hardware...

$4.95

In stock

Adafruit Metro ESP32-S2

Product ID: 4775

What's Metro shaped and has an ESP32-S2 WiFi module? What has a STEMMA QT connector for I2C devices, and a Lipoly charger circuit? What has your favorite Espressif WiFi microcontroller and lots of memory for your next IoT project? That's right - its the new Adafruit Metro ESP32-S2! With native USB and a load of PSRAM this board is perfect for use with CircuitPython...

$22.50

In stock

Adafruit Proto Cape Kit for Beagle Bone and Beagle Bone Black installed onto board

Adafruit Proto Cape Kit for Beagle Bone & Beagle Bone Black

Product ID: 572

Add some circuitry to your Beagle Bone or Beagle Bone Black with our lovely Proto Cape. If you have a 'Bone you need one of these! This PCB fits neatly on top of a Beagle Bone, without getting in the way of the Ethernet jack, and provides a breakout to both 46 pin headers - with individual numbering to keep them straight. We also threw down some strips to access the...

$9.95

21 in stock

Group of Small Alligator Clip to Female Jumper Wires

Small Alligator Clip to Female Jumper Wire Bundle - 6 Pieces

Product ID: 4304

When working with unusual non-header-friendly surfaces, these handy cables will be your best friends! No longer will you have long, cumbersome strands of alligator clips. These compact jumper cables have a premium female header on one end and a grippy mini alligator clip on the other. Grab onto your Circuit Playground, micro:bit, CRICKIT, Gemma, or even a banana, and...

$3.95

In stock

Smart Car Cutebot Robot for micro:bit

Product ID: 4575

This fully-assembled and ready-to-rock robot smart car is the nicest we've seen and is incredibly easy to use with a micro:bit and MakeCode. It comes all ready to go, no soldering or screw-driver required. Simply plug in your :bit into the top slot and add three AAA batteries to get moving. The Cutebot is a rear-drive smart car driven by dual high speed motors so it...

$29.95

61 in stock

Angled shot of STM32F411 development board.

STM32F411 "BlackPill" Development Board

Product ID: 4877

This simple development board for the STM32F411 is a great way to add a powerful STM chip to your next project. Featuring the STM32F411CEU6, this chip has 512 KB of flash, 128 KB of SRAM, and runs at 100 MHz. There's a spot on the bottom for wide SOIC flash memory - you could solder on a 2 MB SPI flash memory chip (its barely wide enough to sit on the pads) to give...

$29.95

In stock

Assembled Feather HUZZAH w/ ESP8266 WiFi With Stacking Headers

Product ID: 3213

$19.95

In stock

Small Alligator Clip Test Lead (set of 6)

Product ID: 4100

Connect this to that without soldering using these small alligator clip test leads. 18" long cables with color-coded alligator clips on both ends. You get 6 pieces in 6 unique colors. Strong and grippy, these always come in handy! We often use these in conjunction with a multimeter so we don't have to hold the probes in place. Compared to our large alligator clip...

$2.95

In stock

Assembled Adafruit Feather HUZZAH with ESP8266 With Headers

Product ID: 3046

Feather is the flagship development board from Adafruit, and like its namesake, it is thin, light, and lets you fly! We designed Feather to be a new standard for portable microcontroller cores. This is the Assembled Adafruit Feather HUZZAH ESP8266 with headers - our take on an 'all-in-one' ESP8266 WiFi development board with built-in USB and battery charging and...

$18.95

In stock

Adafruit MIDI FeatherWing Kit

Product ID: 4740

Turn your Feather into a song-bird with this musically-enabled FeatherWing that adds MIDI input and output jacks to just about any Feather. You get both input and output DIN-5 MIDI jacks, a 3V optically isolator so you can interface with MIDI on 3.3V logic/power microcontrollers, and two blinky indicator LEDs underneath the jacks to help you know when data is sent...

$6.95

51 in stock

Smoke Snap-on Case for micro:bit V2

Product ID: 4852

This simple Smoke Snap-on Case is both good looking and tough enough to toss into your bookbag or toolbox. It has slim cut-outs for your cable, speaker, battery. It's darkened plastic but you can still easily see the LEDs shining through. The bottom section is open so you can plug it into a micro:bit accessory. This case is great if you want to protect your micro:bit...

$2.95

96 in stock

2.4GHz Dipole Swivel Antenna with RP-SMA - 5dBi

Product ID: 945

This 8"/200mm long swivel dipole antenna has 5dBi of gain and 50Ω impedance so it will work fantastically with just about any 2.4-2.5GHz wireless receiver/transmitter such as: 2.4GHz Wi-Fi (802.11b/g/n). 2.4GHz XBee. Bluetooth. Other 2.4GHz transceivers. Antenna comes with the industry standard RP-SMA connector that is found on nearly all WiFi devices. If you...

$8.95

93 in stock

Assembled Adafruit Prop-Maker FeatherWing

Product ID: 4145

The Adafruit Feather series gives you lots of options for a small, portable, rechargeable microcontroller board. Perfect for fitting into your next prop build! This FeatherWing will unlock the prop-maker inside all of us, with tons of stuff packed in to make sabers & swords, props, toys, cosplay pieces, and more. This version of the FeatherWing has plain headers...

$10.95

In stock

Adafruit Metro M4 Airlift Lite dev board with SAMD51 an ESP32 Wifi Co-processor.

Adafruit Metro M4 Express AirLift (WiFi) - Lite

Product ID: 4000

Give your next project a lift with AirLift - our witty name for the ESP32 co-processor that graces this Metro M4. You already know about the Adafruit Metro M4 featuring the Microchip ATSAMD51, with it's 120MHz Cortex M4 with floating point support. With a train-load of FLASH and RAM, your code will be fast and roomy. And what better way to improve it than to add...

$34.95

In stock

ESP32-C3 RISC V Developer Board - 4 MB SPI Flash - DevKitC-02 ESP32-C3-WROOM-02

Product ID: 5337

The ESP32-C3-DevKitC-02 is an entry-level RISC V development board equipped with the ESP32-C3-WROOM-02, a powerful, generic Wi-Fi + Bluetooth LE MCU module that features a rich set of peripherals, yet an optimized size. It's an ideal choice for a wide variety of application scenarios related to the Internet of Things (IoT), such as embedded systems, smart homes,...

$9.95

40 in stock

Adafruit Grand Central M4 Express featuring SAMD51 - Without Headers

Product ID: 4084

$29.95

In stock

Angled shot of a USB WiFi (802.11b/g/n) Module.

USB WiFi (802.11b/g/n) Module: For Raspberry Pi and more

Product ID: 1012

Make your Internet of Things device cable-free by adding WiFi. Take advantage of the Raspberry Pi and Beagle Bone's USB port to add a low cost, but high-reliability wireless link. We tried half a dozen modules to find one that works well with the Pi and Bone without the need of recompiling any kernels: its supported by the Bone's Angstrom installation that comes with...

$13.95

98 in stock

FeatherS2 - ESP32-S2 Feather Development Board

Product ID: 4769

Introducing the FeatherS2 - The full-featured ESP32-S2 based development board in a Feather format from Unexpected Maker. The FeatherS2 is a power house, fully souped up with 16 MB of Flash memory (for firmware and file storage) and 8 MB of QSPI-based external PSRAM so you can have massive storage buffers. This Feather comes with two 3.3V regulators: The first one is...

$24.95

In stock

Music Maker FeatherWing w/ Amp - MP3 OGG WAV MIDI Synth Player - Stereo 3W Amplifier

Product ID: 3436

Bend all audio files to your will with the Adafruit Music Maker FeatherWing + Amplifier! It's a fun-size version of our Music Maker shield for Arduino, and similar to our other Music Maker FeatherWing, but this one is even better - with an on-board 3 Watt amplifier! This powerful wing features the VS1053, an encoding/decoding (codec) chip that can decode a wide...

$24.95

In stock

Angled shot of a square-shaped breakout board with an on-off button.

Adafruit IoT Button with NeoPixel BFF Add-On for QT Py and Xiao

Product ID: 5666

Our QT Py boards are a great way to make very small microcontroller projects that pack a ton of power - and now we have a way for you to quickly add a chunky 12mm tactile button with a NeoPixel. It's an excellent way to create simple 'IoT Button' type projects with basic interactivity. We call this the Adafruit IoT Button with NeoPixel BFF - a "Best Friend Forever"....

$3.50

In stock

2x23 Male Headers for BeagleBone Black - Two Pack!

Product ID: 2076

These simple 2x23 male headers are a great addition to your Beagle Bone Black, plugging right into each set of side-sockets. Each pack comes with two headers so you can connect prototype PCBs or capes on. Each header is 0.1"x 0.1" grid spacing

$1.50

In stock

Adafruit Slider Trinkey - USB NeoPixel Slide Potentiometer

Product ID: 5021

It's half USB Key, half Adafruit Trinket, half mini slide pot... it's Slider Trinkey, the circuit board with a Trinket M0 heart, NeoPixel glow, and a 35mm long 10KΩ slide potentiometer. The PCB is designed to slip into any USB A port on a computer or laptop. There's an ATSAMD21 microcontroller on board with just enough circuitry to keep it happy. One pin of the...

$9.95

In stock

Adafruit Bonsai Buckaroo - micro:bit & CLUE Plant Care Helper

Product ID: 4534

We can’t wait for spring to arrive, and we’re looking forward to caring for some plants! We designed this little add-on for micro:bit or CLUE boards – bolt it on with 5 screws to get a buzzer/beeper, motor driver, and breakouts for connecting a soil sensor (two alligator clips + nails work just fine). Simple, but effective! 8mm Buzzer/Speaker on pin...

$4.95

99 in stock

Adafruit Quad 2x2 FeatherWing Kit with Headers

Product ID: 4253

This is the FeatherWing Quad 2x2 - a prototyping add-on and more for all Feather boards. This is similar to our FeatherWing Proto except there are four! The magic of the Quad comes when you want to connect your Feather to three other Feather Wings without needing any stacking headers. The boards are all set up in a 2x2 grid, thus the name The Quad comes with: 1 Quad...

$9.95

In stock

Adafruit RGB Matrix Featherwing Kit - For RP2040, M0 and M4 Feathers

Product ID: 3036

Ahoy! It's time to create a dazzling light up project with our new RGB Matrix FeatherWing. Now you can quickly and easily create projects featuring your favorite 16 or 32-pixel tall matrix boards. Using our RGB Matrix library is easy and works wonderfully with any of our M0 or M4 based Feathers. Please note: This wing is only tested/designed to work with the RP2040,...

$7.50

39 in stock

Adafruit ATSAMD09 Breakout with seesaw

Product ID: 3657

Adafruit seesaw is a near-universal converter framework which allows you to add and extend hardware support to any I2C-capable microcontroller or microcomputer. Instead of getting separate I2C GPIO expanders, ADCs, PWM drivers, etc, seesaw can be configured to give a wide range of capabilities. For example, our ATSAMD09 breakout with seesaw gives you 3 x 12-bit ADC...

$4.95

In stock

Passive PoE Injector Cable Set

Product ID: 435

Simplify your Internet of Things with a passive PoE injector cable. These are quite handy for projects that have Ethernet connectivity and also need a power cable. Of course, you can get a long Ethernet cable but then you have to figure out how to plug it in, making a mess of wires. There is an official Power-over-Ethernet standard that allows devices and routers to...

$5.95

In stock

Stacking Header Kit for ItsyBitsy or Teensy

Product ID: 3883

These three Stacking Headers alone are, well, lonely. But pair them with our ItsyBitsy boards, and you're in business! Great for putting something a-top your ItsyBitsy, like this AirLift bitsy add-on. Also works great for 'short' Teensy boards - not Teensy 3.5 or 3.6 long style boards. Note: Kit includes two 14-pin and one 5-pin header. ItsyBitsy not included. Don't...

$1.25

In stock

Adafruit 5x5 NeoPixel Grid BFF Add-On for QT Py and Xiao

Product ID: 5646

Our QT Py boards are a great way to make very small microcontroller projects that pack a ton of power - and now we have a way for you to quickly add a glittering grid of 25 RGB addressable micro NeoPixels. It's an excellent way to make tiny wearable, cosplay, or IoT projects with dazzling LEDs. We call this the Adafruit 5x5 NeoPixel Grid BFF - a "Best Friend...

$9.95

100 in stock

Angled shot of long skinny microcontroller.

ProS3 - ESP32-S3 Development Board by Unexpected Maker

Product ID: 5401

Introducing the ProS3 - The Ultimate Pro ESP32-S3 Development Board The ProS3 ships with the latest version of CircuitPython with ESP32-S3 support. It also ships with the UF2 bootloader, so you can easily update your ProS3 with the latest CircuitPython firmware, whenever you desire. Just plug your ProS3 into your computer and it will appear in your filesystem as a...

$25.00

In stock

Adafruit NeoTrellis M4 Mainboard - featuring SAMD51

Product ID: 3938

We got a big ol' blender and tossed in an ItsyBitsy M4, two NeoTrellis boards and an electret mic amp - turned on the 'mix' button and out came the NeoTrellis M4 - a super fun dev board for anyone who likes to squish buttons, see pretty lights and maybe make a tune or two. The NeoTrellis M4 is an all-in-one USB + NeoPixel + Elastomer + Audio board. It's powered by...

$39.95

34 in stock

Angled shot of long black rectangular microcontroller.

FeatherS3 ESP32-S3 with u.FL by Unexpected Maker

Product ID: 5748

Introducing the FeatherS3 - The pro ESP32-S3 Development Board in the Feather Format now with a u.FL connector instead of an onboard antenna, for the times when you want to connect an external antenna for longer radio range, or for putting your S3 boards inside a case/enclosure. The FeatherS3 ships with the latest version of CircuitPython with ESP32-S3 support. It...

$22.50

49 in stock

Plastic Translucent Enclosure for Metro or Arduino with Metro installed

Plastic Translucent Enclosure for Metro or Arduino - LEGO Compatible

Product ID: 4490

This simple but effective enclosure will fit any 'classic Arduino' shaped development board - we've tested it with the Arduino UNO R3, Adafruit Metro, and Adafruit Metro M4 Express. We rather like this case because it's low-profile enough that you can fit shields on top. There's even a flexi-nub for pressing the reset button! Best of all, it's LEGO brick compatible!...

$4.95

40 in stock

Angled shot of red credit-card sized microcontroller.

Adafruit Metro M7 with microSD - Featuring NXP iMX RT1011

Product ID: 5600

Your favorite electronics companies have collaborated to make the fastest Metro ever! For this new product, DigiKey, NXP and Adafruit all contributed the stuff the stuff they know best: shipping parts fast (DigiKey), designing microcontrollers (NXP) and crafting great products with tutorials (that's us, Adafruit!) We teamed up to present to you the Adafruit Metro M7...

$19.95

In stock

Adafruit EYESPI BFF for QT Py or Xiao - 18 Pin FPC Connector

Product ID: 5772

Our QT Py boards are a great way to make very small microcontroller projects that pack a ton of power - and now we have a way for you to add a small, colorful, and bright display to any project. Our most recent display breakouts have come with a new feature: an 18-pin "EYE SPI" standard FPC connector with flip-top connector. This is intended to be a sort-of "STEMMA...

$3.95

In stock

Adafruit Joy FeatherWing for all Feathers

Product ID: 3632

Make a game or robotic controller with this Joy-ful FeatherWing. This FeatherWing has a 2-axis joystick and 5 momentary buttons (4 large and 1 small) so you can turn your feather board into a tiny game controller. This wing communicates with your host microcontroller over I2C so it's easy to use and doesn't take up any of your precious analog or digital pins. There...

$9.95

68 in stock

Grove Shield FeatherWing for Particle Mesh and all Feathers

Product ID: 4309

The Grove Shield FeatherWing for Particle Mesh and all Feathers is an add-under for any Particle Mesh or Feather board, so that you can easily interface with Seeed's huge collection of Grove sensors. Now you can have full range of hundreds of Grove modules with Particle Mesh along with our Feather line! Working with Grove requires no soldering. Just plug the sensors,...

$5.95

In stock

Angled shot of black rectangular dev board.

ESP32-C3-DevKit-RUST-1 - 4 MB Flash

Product ID: 5787

ESP32-C3-DevKit-RUST-1 is an entry-level RISC V development board equipped with the ESP32-C3-MINI-1, a powerful, generic Wi-Fi + Bluetooth LE MCU module that features a rich set of peripherals, yet an optimized size. It's an ideal choice for a wide variety of application scenarios related to the Internet of Things (IoT), such as embedded systems, smart homes,...

$19.95

90 in stock

Adafruit NeoKey BFF for Mechanical Key Add-On for QT Py and Xiao - For MX Compatible Switches

Product ID: 5695

Our QT Py boards are a great way to make very small microcontroller projects that pack a ton of power - and now we have a way for you to quickly add a nice mechanical key that also can glow any color of the rainbow. We call this the Adafruit NeoKey BFF - a "Best Friend Forever". When you were a kid you may have learned about the "buddy" system, well this product is...

$2.50

In stock

E-Ink display connected to Feather, with image of friendly snake

Adafruit 2.13" HD Tri-Color eInk / ePaper Display FeatherWing - 250x122 RW Panel with SSD1680

Product ID: 4814

Easy e-paper comes to your Feather, with this breakout that's designed to make it a breeze to add a tri-color eInk display. Chances are you've seen one of those new-fangled 'e-readers' like the Kindle or Nook. They have gigantic electronic paper 'static' displays - that means the image stays on the display even when power is completely disconnected. The image is also...

$24.95

16 in stock

Angled shot of a Adafruit LSM6DSOX + LIS3MDL FeatherWing.

Adafruit LSM6DSOX + LIS3MDL FeatherWing - Precision 9-DoF IMU

Product ID: 4565

Upgrade any Feather board with precision motion sensing with the ST 9-DoF IMU, an all-in-one sensing 'Wing. It sports two fantastic sensors from ST to provide 9 degrees of full-motion data. The board includes an LSM6DSOX, a 6-DoF IMU accelerometer + gyro. The 3-axis accelerometer can tell you which direction is down towards the Earth (by measuring gravity) or how...

$19.95

In stock

Adafruit I2S Amplifier BFF Add-On for QT Py and Xiao

Product ID: 5770

Our QT Py boards are a great way to make very small microcontroller projects that pack a ton of power - and now we have a way for you to add an I2S 3 Watt amplifier, for high quality audio playback, that can fit on the back of your miniature dev board. It uses just three GPIO pins that do not intersect with the I2C/UART or SPI port. We call this the Adafruit I2S Amp...

$4.95

In stock

Angled shot of short rectangular black microcontroller.

TinyS3 ESP32-S3 with u.FL by Unexpected Maker

Product ID: 5747

Introducing the TinyS3 - The Tiny Mighty ESP32-S3 development board in the TinyPICO format! Now with a u.FL connector instead of an onboard antenna, for the times when you want to connect an external antenna for longer radio range, or for putting your S3 boards inside a case/enclosure. TinyS3 is the latest in Unexpected Maker's super popular range of "Tiny"...

$20.00

67 in stock

$Top view of kit contents, including an empty snowglobe, diffraction paper glasses, a disassembled ornament, Circuit Playground Bluefruit, LiPo battery, TFT Gizmo, enclosure, and hardware.$

Adafruit Circuit Playground Bluefruit Express Starter Kit - ADABOX014 Essentials

Product ID: 4504

If you missed out on ADABOX 014, its not too late for you to pick up the parts necessary to build many of the projects! This kit pack doesn't come with tissue paper or the nifty extras, but it does have all the electronic goodies you need This project pack features the Circuit Playground Bluefruit with Bluetooth LE support so now we can make our projects wireless!...

$64.95

10 in stock

Angled shot of Adafruit HalloWing M4 Express.

Adafruit HalloWing M4 Express - Goth Adafruit Black Edition

Product ID: 4300

This is Hallowing..this is Hallowing... Hallowing! Hallowing! Following up on 2018's most-successful-skull-shaped development board, we UPPED our -skull-shaped development board game, and re-spinned (re-spun?) the HalloWing M0 into the HalloWing M4 with MORE of everything that makes this the spoooookiest dev board. Are you the kind of person who doesn't like taking...

$39.95

In stock

Angled shot of black rectangular microcontroller with a wifi module.

ESP32-S3-DevKitM-1-N8 - ESP32-S3-MINI-1 Dev Board - 8 MB Flash

Product ID: 5311

The ESP32-S3-DevKitM-1 is an entry-level development board equipped with the ESP32-S3-MINI-1, a powerful, generic Wi-Fi + Bluetooth LE MCU module that features a rich set of peripherals, yet an optimized size. It's an ideal choice for a wide variety of application scenarios related to the Internet of Things (IoT), such as embedded systems, smart homes, wearable...

$15.95

13 in stock

ESP32-S3-DevKitC-1-N8 - ESP32-S3-WROOM-1 Dev Board - 8MB Flash

Product ID: 5312

The ESP32-S3-DevKitC-1 is an entry-level development board equipped with ESP32-S3-WROOM-1, a general-purpose Wi-Fi + Bluetooth LE MCU module that integrates complete Wi-Fi and Bluetooth LE functions. This version is equipped with the ESP32-S3-WROOM-1 (PCB antenna) with 8MB Flash and no PSRAM. Please note: The S3 is similar to the ESP32-S2 - but adds a dual core and...

$15.95

71 in stock

Adafruit MetroX Classic Kit - Experimentation Kit for Metro 328

Product ID: 3588

Interested in making neat stuff with an Arduino-compatible board but not sure where to start? This kit includes all the pieces needed to complete over 20 different circuit and projects. Basically everything you need to be playing within minutes of its arrival. No soldering required, works with Mac, Windows and Linux! This item is the same exact kit as...

$84.95

10 in stock

SparkFun Qwiic / Stemma QT FeatherWing with three QT boards plugged into the top

SparkFun Qwiic / Stemma QT FeatherWing (Shield for Thing Plus)

Product ID: 4515

The SparkFun Qwiic FeatherWing (Shield for Thing Plus) provides an easy-to-assemble way to add the STEMMA QT / Qwiic connect ecosystem to any development board with Feather/Thing Plus Footprint. It connects the I2C bus (GND, 3.3V, SDA, and SCL) on your Feather to four SparkFun Qwiic / Stemma QT connectors. The plug-n-play ecosystem allows for easy daisy chaining so,...

$5.95

31 in stock

ESP32-S3-DevKitC-1-N8R8 - ESP32-S3-WROOM-1 - 8MB Flash 8MB PSRAM

Product ID: 5336

The ESP32-S3-DevKitC-1 is an entry-level development board equipped with ESP32-S3-WROOM-1, a general-purpose Wi-Fi + Bluetooth LE MCU module that integrates complete Wi-Fi and Bluetooth LE functions. This version is equipped with the ESP32-S3-WROOM-1 (PCB antenna) with 8MB Flash and 8 MB PSRAM. Please note: The S3 is similar to the ESP32-S2 - but adds a dual core and...

$19.95

33 in stock

Adafruit INA219 FeatherWing

Product ID: 3650

The INA219 FeatherWing makes power-monitoring problems a thing of the past. Instead of struggling with two multimeters, you can just use the handy INA219 chip on this breakout to measure both the high side voltage and DC current draw over I2C with 1% precision. Works with any and all Feathers! Communicates over I2C so its super-simple to use, you can even change the...

$7.95

In stock

Clear Acrylic Enclosure + Hardware Kit for Adafruit CLUE

Product ID: 4675

Here is a chic minimalist enclosure for your CLUE board! This case has been laser-cut specifically to accommodate the TFT display, tactile buttons, and capacitive pads. And of course, we include mounting hardware so you can assemble it right onto your CLUE board. Takes less than five minutes to assemble, just find a nearby screwdriver. Please note: It won't work with...

$4.95

In stock

Circuit Playground Proto Gizmo - Bolt-on Perma-Proto

Product ID: 4320

Extend and expand your Circuit Playground projects with a bolt-on Perma-Proto that lets you connect solderable circuits in a sturdy and reliable fashion. This PCB looks just like a solderless breadboard but has permanently affixed M3 standoffs that act as mechanical and electrical connections. Solder to the gold-plated traces to create your custom invention! Each pad...

$7.95

66 in stock

Overhead shot of blue, rectangular 9-DOF IMU sensor breakout.

Adafruit ISM330DHCX + LIS3MDL FeatherWing - High Precision 9-DoF IMU

Product ID: 4569

Upgrade any Feather board with precision motion sensing with the ST 9-DoF IMU, an all-in-one sensing 'Wing. It sports two fantastic sensors from ST to provide 9 degrees of full-motion data. The ST ISM330DHCX is an industrial quality Accelerometer+Gyroscope 6-DOF IMUs (inertial measurement unit). This IMU sensor has 6 degrees of freedom - 3 degrees each of linear...

$29.50

In stock

Adafruit AirLift Bitsy Add-On – ESP32 WiFi Co-Processor

Product ID: 4363

Give your ItsyBitsy project a lift with the Adafruit AirLift Bitsy Add-On - a daughterboard that lets you use the powerful ESP32 as a WiFi co-processor. You probably have your favorite ItsyBitsy (like the Itsy' M4) that comes with its own set of awesome peripherals and lots of libraries. But it doesn't have WiFi built in! So lets give that chip a best friend, the...

$14.95

In stock

Adafruit Metro M7 with AirLift - Featuring NXP iMX RT1011

Product ID: 4950

Get ready for our fastest Metro ever - the NXP iMX RT1011 microcontroller powers this board with a 500 MHz ARM Cortex M7 processor. There's 8 MB of execute-in-place QSPI for firmware + disk storage and 128KB of SRAM in-chip, plus a WiFi co-processor using an on-board ESP32 module. The iMX series of chips is the fastest microcontrollers around, with a Cortex M7...

$29.95

29 in stock

Top-down view of a red rectangular sensor.

Adafruit ADXL343 + ADT7410 Sensor FeatherWing

Product ID: 4147

Upgrade any Feather board with motion and precision temperature sensing, with this all-in-one sensing FeatherWing. It sports two fantastic sensors from Analog Devices: an ADXL343 triple-axis accelerometer and an ADT7410 precision temperature sensor. Both sensors are connected over the shared I2C bus, so you can use it with any and all Feathers! We also break out the...

$11.95

In stock

M5Stack ATOM Matrix ESP32 Development Kit

Product ID: 4497

The ATOM Matrix, at only 24 x 24mm, is the most compact development board in the M5Stack development kit series. The fits-in-your-change-pocket size computer contains a ESP32-PICO-D4 chip, which comes integrated with WiFi, Bluetooth, and 4MB of integrated SPI flash memory. All this along with its bitty form factor, it also provides more GPIO pins, making it ideal for...

$16.50

45 in stock

Circuit Playground Bolt-On Kit

Product ID: 3816

You have a Circuit Playground Express, but you need to mount it to your charming cardboard robot friend, eh? Not so easy if you don't have a set of standoffs! In this kit comes: 6 x M3 12mm brass hexagonal standoffs. 12 x M3 5mm machine screws. If you bought a Crickit for Circuit Playground, this kit is already included - we're offering it in case you've designed...

$3.95

In stock

Front cover of Python for Microcontrollers book

Python for Microcontrollers: Getting Started with MicroPython

Product ID: 3325

MicroPython is a tiny open-source Python programming language interpreter that runs on microcontroller, originally written by Damien George (http://micropython.org/). With MicroPython you can write clean and simple Python code to control hardware instead of having to use complex low-level languages like C or C++ (what Arduino uses for programming). Its great for...

$19.95

17 in stock

Adafruit NeoPXL8 FeatherWing for Feather M4 - 8 x DMA NeoPixels!

Product ID: 4537

Since we first started carrying NeoPixels back in 2012, the chainable RGB LEDs have taken over the world. And a big part of that success is due to the simplicity of their wiring - just one data wire, no matter how many pixels you've got. So no surprise they're everywhere, blinking away in art exhibits, maker faire demos, DJ booths, decorations, and costumes. But, at...

$6.95

In stock

Adafruit RP2040 Feather ThinkInk for 24-pin E-Paper Displays - STEMMA QT

Product ID: 5727

Easy e-paper and RP2040 finally come to your Feather with this Adafruit RP2040 Feather Think Ink that's designed to make it a breeze to add almost any common e-Ink/e-Paper display. Chances are you've seen one of those new-fangled 'e-readers' like the Kindle or Nook. They have gigantic electronic paper 'static' displays - that means the image stays on the display even...

$17.50

85 in stock

Adafruit ATtiny817 Breakout with seesaw - STEMMA QT / Qwiic

Product ID: 5233

This breakout board is a "three in one" product: The ATtiny817 is part of the 'next gen' of AVR microcontrollers, and now we have a cute development/breakout board for it, with just enough hardware to get the chip up and running.It's also an Adafruit seesaw board. Adafruit seesaw is a near-universal converter framework which allows you to add and extend hardware...

$4.95

In stock

BeagleBone Black Rev C - 4GB - Pre-installed Debian

Product ID: 1996

If you liked the BeagleBone Black Rev B, you will love the Rev C! The Rev C has a blistering 1GHz AM3358 processor and 512MB onboard DDR3 RAM, two 46-pin headers, micro HDMI for audio/video output, USB ports, 10/100 Ethernet and other I/O features. The Rev C is an ultra-powered embedded computer that can fit in a mint tin. This model includes 4GB of eMMC built-in...

$78.00

In stock

M5Stack ESP32 Timer Camera X with 8 MB PSRAM

Product ID: 4959

M5Stack's Timer Camera X is an all-in-one camera module based on ESP32, integrated with ESP32 chip and has 8M PSRAM. Why so much PSRAM? Well, the camera can shoot up to 2048x1536 resolution photos(!). The module also comes with a built-in 140mAh battery and LED status indicator. There is a reset button under the LED. You can use the built-in RTC (BM8563) to keep...

$19.95

18 in stock

Angled shot of a black rectangular microcontroller with GPIO header.

Adafruit Floppy FeatherWing with 34-Pin IDC Connector

Product ID: 5679

Relive the days when storage was counted out in kilo-bytes not giga-bytes, using the Adafruit Floppy FeatherWing on a Feather board - perfect for interfacing with 34-Pin IDC Connector floppy drives that were ubiquitous on PC's. This 'Wing has level shifting and a ready-to-plug connector that works with 3.5" or 5.25" floppy disks for reading or writing! Floppy disks...

$4.95

In stock

Angled shot of long skinny black microcontroller.

ProS3 ESP32-S3 with u.FL by Unexpected Maker

Product ID: 5749

Introducing the ProS3 - The Ultimate Pro ESP32-S3 Development Board now with a u.FL connector instead of an onboard antenna, for the times when you want to connect an external antenna for longer radio range, or for putting your S3 boards inside a case/enclosure. The ProS3 ships with the latest version of CircuitPython with ESP32-S3 support. It also ships with the UF2...

$25.00

45 in stock

Getting Started with Adafruit Circuit Playground Express - by Anne Barela

Product ID: 3944

Make: Getting Started with Circuit Playground Express is written by our friend, Anne Barela, author of G.S.W. Adafruit Trinket. Anne is an engineer and Maker with the Adafruit team. We also have a great bundle that includes everything you need to follow along with the projects in the book, no soldering required! This book gives you the low-down on microcontrollers by...

$19.45

95 in stock

Image of an orange and yellow cartoon python on a black driver chip.

MicroPython Sticker

Product ID: 3270

Adafruit offers fun and exciting stickers for achievement in electronics, science and engineering. We believe everyone should be able to be rewarded for learning a useful skill, a sticker is just one of the many ways to show and share. This is the "I use MicroPython!" sticker for use with educators, classrooms, workshops, Maker Faires, TechShops, Hackerspaces,...

$2.50

In stock

Adafruit CRICKIT for micro:bit

Product ID: 3928

$29.95

In stock

Fomu - ICE40 FPGA Development Board

Product ID: 4332

Only 13mm long, Fomu really puts the micro in microprocessor. Fomu is a fully open-source, programmable FPGA device that sits inside a USB Type-A port. It has four buttons, an RGB LED, and an FPGA that is compatible with a fully open source chain and capable of running a RISC-V core. Fomu comes in a custom plastic enclosure that slots perfectly into a USB port. Fomu:...

$49.95

26 in stock

WeAct Studio STM32H750 Development Board

Product ID: 5032

This simple development board for the STM32H750 is a great way to add a powerful STM chip to your next project. Featuring the STM32H750VBT6, this chip has 1024KB of RAM, 8MB of QSPI Flash, and runs at 480 MHz. This dev board is not designed or developed by Adafruit. It's for advanced users who are already familiar with STM32 development! We don't have detailed...

$44.50

28 in stock

ESP32-C6-WROOM-1-N4 Engineering Module - 4 MB Quad SPI Flash - PCB Antenna

Product ID: 5670

ESP32-C6-WROOM-1-N4 is an ESP32-C6-based module, which supports WiFi 6 in a 2.4GHz band, Bluetooth 5, Zigbee 3.0, and Thread. It's pin-to-pin compatible with the ESP32-WROOM series module. With low-power consumption, it is an ideal choice for a variety of IoT devices! This module comes with 4MB SPI Flash Features: 32-bit RISC-V single-core processor that operates at...

$2.95

In stock

Adafruit RGB Matrix FeatherWing Kit - For nRF52840 Feathers

Product ID: 4702

Ahoy! It's time to create a dazzling light up project with our new RGB Matrix FeatherWing for nRF52840. Now you can quickly and easily create projects featuring your favorite 16 or 32-pixel tall matrix boards. Using our RGB Matrix library is easy and works wonderfully with our nRF52840 based Feathers. Please note: This 'Wing is only tested/designed to work with the...

$7.50

In stock

Adafruit NeoPXL8 FeatherWing for Feather M0 - 8 x DMA NeoPixels!

Product ID: 3249

$6.95

56 in stock

Faded image of a rectangular microcontroller and text that reads "my newt".

Adafruit Feather nRF52 Pro with myNewt Bootloader - nRF52832

Product ID: 3574

The Adafruit Feather nRF52 Pro is another Bluetooth Low Energy board for advanced projects and users who want to use a fully open-source Bluetooth Low Energy 5.0 stack. It has a native Bluetooth chip, the nRF52832, as well as built-in USB Serial and battery charging! We have other boards in the Feather family, check'em out here. This is a special Feather - unlike the...

$27.50

In stock

RockBLOCK 9603 with USB Cable - Iridium Satellite Modem Bundle

Product ID: 4521

The RockBLOCK 9603 allows you to send and receive short messages from anywhere on Earth with a clear view of the sky. And when we say anywhere we mean anywhere. It works far beyond the reach of WiFi and GSM networks. Maybe you want to transmit weather information from mid-ocean? Or use it to control your robot in the middle of the desert? Perhaps you need emergency...

$299.95

72 in stock

SMT Socket Header Kit for FeatherWings

Product ID: 4743

These two SMT Socket Headers alone are, well, lonely. But pair them with any of our Feather boards and you're in business! These headers are particularly cute and slim and are designed to match with FeatherWings. It's harder to solder than thru-hole type headers, but for reflow-friendly builds these headers are recommended! We use these on all types of 'Wings, from...

$2.95

In stock

ESP32-S3-DevKitC-1-N8R2 - ESP32-S3-WROOM-1 - 8MB Flash 2MB PSRAM

Product ID: 5310

The ESP32-S3-DevKitC-1 is an entry-level development board equipped with ESP32-S3-WROOM-1, a general-purpose Wi-Fi + Bluetooth LE MCU module that integrates complete Wi-Fi and Bluetooth LE functions. This version is equipped with the ESP32-S3-WROOM-1 (PCB antenna) with 8MB Flash and 2 MB PSRAM. Please note: The S3 is similar to the ESP32-S2 - but adds a dual core and...

$17.50

73 in stock

Icarus IoT Board V2 - nRF9160

Product ID: 4753

The Icarus is a cost-effective cellular IoT board built around Nordic Semi's nRF9160 modem and combines LTE-M, NB-IoT, GPS, accelerometer, USB, LiPo charger, as well as an eSIM with free data out of the box and a nano SIM connector. Control, monitor, and keep track of any asset, fleet or cargo, quickly and easily with this pre-certified device! You might be looking...

$130.00

3 in stock

802.3af PoE Output Data & Power Splitter - 5/9/12V

Product ID: 3239

$24.95

In stock

TinyPICO V3 USB-C with u.FL by Unexpected Maker

Product ID: 5750

TinyPICO is the world’s smallest, fully-featured ESP32 development board, designed to unlock the power of the ESP32’s dual-core 240MHz and internet connectivity, in a package smaller than your thumb! Please note: This is the u.FL version of the TinyPICO USB-C. Click here for the PCB antenna version. TinyPICO V2 with Micro-B is still available over here!...

$21.95

32 in stock

Adafruit Metro 328 Starter Pack

Product ID: 3345

Heard about Arduino IDE-compatibles but not sure how to start? The Adafruit Metro is an ATmega328-based (like a lot of our own products) development board. Since it is shaped the same, and code/shield-compatible with the Arduino UNO R3 design, our Adafruit Metro is easy to use and hacker friendly and this is the perfect beginner kit for learning how to use the...

$44.95

17 in stock

Adafruit AMG8833 IR Thermal Camera FeatherWing

Product ID: 3622

A Feather board without ambition is a Feather board without FeatherWings! This is the Thermal Camera FeatherWing: thanks to the Panasonic AMG8833 8x8 GridEYE sensor, it adds heat-vision to any Feather main board. Using our Feather Stacking Headers or Feather Female Headers you can connect a FeatherWing on top of your Feather board and let the board take flight! This...

$44.95

In stock

Raspberry Pi RP2040 Microcontroller - Surface Mount Chips - 10 Pack

Product ID: 5042

The Raspberry Pi foundation changed single-board computing when they released the Raspberry Pi computer, now they've done the same for microcontrollers with the release of the powerful new chip, the Raspberry Pi RP2040. We've used this chip in a bunch of breakouts and dev boards, but perhaps you want to use it too? Now these are available in cut tape strips of 10 for...

$10.00

2 in stock

FeatherS2 Neo - Blingy RGB ESP32-S2 Feather Development Board - Unexpected Maker

Product ID: 5629

Introducing the FeatherS2 Neo - The full-featured ESP32-S2-based development board in a Feather format from Unexpected Maker. The FeatherS2 Neo is a powerhouse, fully souped up with 4 MB of Flash memory (for firmware and file storage) and 2 MB of QSPI-based external PSRAM so you can have massive storage buffers. The FeatherS2 Neo has onboard LiPo battery charging,...

$24.50

67 in stock

Angled shot of Assembled Adafruit Feather M0 WiFi.

Assembled Adafruit Feather M0 WiFi - ATSAMD21 + ATWINC1500

Product ID: 2598

Feather is the new development board from Adafruit, and like its namesake, it is thin, light, and lets you fly! We designed Feather to be a new standard for portable microcontroller cores. This is the Assembled Adafruit Feather M0 WiFi w/ATWINC1500 - our take on an 'all-in-one' Arduino-compatible + high speed, reliable WiFi with built in USB and battery charging. Its...

$36.95

91 in stock

2x40 Right Angle Edge Connector for micro:bit

Product ID: 3342

This is a connector that fits directly to the edge contacts of a BBC micro:bit. The connector has 80 pins, but because of the different widths of the micro:bit edge contacts, some of the micro:bit contacts will map to more than one of this connector's pins. Also, the back half of the pins are not used at all. The edge connector gives access to all the important pins...

$5.95

In stock

LCD FeatherWing from Oddly Specific Objects

Product ID: 5581

The LCD FeatherWing from Oddly Specific Objects is a low-power, CircuitPython-compatible, I²C-driven display that works with Adafruit’s Feather line of development boards. It uses the BU9796 segment LCD controller to drive a custom liquid crystal display glass with 48 segments, including: Five indicator icons: Bell, Wifi, Moon, Arrows, and Battery. Five...

$19.95

39 in stock

TinyS2 - ESP32-S2 Development Board

Product ID: 5029

Introducing the TinyS2 - The Tiny Mighty ESP32-S2 development board in the TinyPICO format! This board features the powerful ESP32-S2, a single-core Tensilica processor with WiFi and native USB so it can run Arduino or Circuitpython code. The ESP32-S2 is a highly-integrated, low-power, 2.4 GHz Wi-Fi System-on-Chip (SoC) solution that now has built-in native USB as...

$18.50

In stock

ESP32-C6-WROOM-1-N8 Engineering Module - 8 MB Quad SPI Flash - PCB Antenna

Product ID: 5671

ESP32-C6-WROOM-1-N8 is an ESP32-C6-based module, which supports WiFi 6 in a 2.4GHz band, Bluetooth 5, Zigbee 3.0, and Thread. It's pin-to-pin compatible with the ESP32-WROOM series module. With low-power consumption, it is an ideal choice for a variety of IoT devices! This module comes with 8 MB Quad SPI Flash memory. Features: 32-bit RISC-V single-core processor...

$3.50

In stock

ESP32-S3 Korvo 2 Main Development Board

Product ID: 5829

The ESP32-S3-Korvo-2 is a multimedia development board based on the ESP32-S3 chip. It is equipped with a two-microphone array, which is great for voice recognition and near/far-field voice wake-up applications. The board can integrate multiple peripherals such as LCD, camera, and microSD card. It also supports JPEG video stream processing. With all of its outstanding...

$49.95

22 in stock

SMT Straight Connector for micro:bit

Product ID: 3888

$2.95

11 in stock

M5Stack Basic Core IoT Development Kit - ESP32 Dev Board

Product ID: 4178

Get yourself a kit that can do it all! The M5Stack Basic Development Kit is a ESP32-based WiFi microcontroller that's compatible with MicroPython and Arduino. It comes jam-packed with Wi-Fi / Bluetooth capability, running at 240 MHz with the dual-core processor and 4MB of SPI Flash. Perfect for people who want to make advanced ESP32 projects with a display, user...

$47.50

37 in stock

Set of Header Pins for MicroPython pyboard

Product ID: 3499

This set of high quality machined header pins can be soldered onto the MicroPython pyboard (all versions), and mate perfectly with both the LCD and Audio modules, as well as the Protoskins. The black pins are used for the standard I/O ports and the 4-way GND rail, and the white pins are used for the 4-way V+ rail and the additional, inner I/O ports. The header pins...

$5.95

32 in stock

Google Coral Development Board

Product ID: 4385

The Coral Dev Board is a single-board computer that's ideal when you need to perform fast machine learning (ML) inferencing in a small form factor. You can use the Dev Board to prototype your embedded system and then scale to production using the on-board Coral System-on-Module (SoM) combined with your custom PCB hardware. The SoM provides a fully-integrated system,...

$175.00

64 in stock

Adafruit DotStar FeatherWing - 6 x 12 RGB LEDs

Product ID: 3449

A Feather board without ambition is a Feather board without FeatherWings! This is the DotStar FeatherWing, a 6x12 RGB LED Add-on For All Feather Boards! Using our Feather Stacking Headers or Feather Female Headers you can connect a FeatherWing on top or bottom of your Feather board and make your Feather board strut like a peacock at a rave. Put on your sunglasses...

$29.95

In stock

Top down view of Launchpad Breakout Board with a CLUE board inserted.

Launchpad Breakout Board for micro:bit and Adafruit CLUE - by Mission Control Lab

Product ID: 4765

This TIE Fighter-lookalike PCB, named Launchpad, is a specially-made add-on board that breaks out all the pins on your micro:bit and CLUE so you can creatively, collaboratively connect your project's circuits with conductive materials on almost anything, nearly anywhere! The breakout sits flat so its good for use on rigid surfaces with conductive paint, or with...

$14.95

In stock

Angled shot of square-shaped extension board.

Sony Spresense LTE Extension Board with Global SIM Card

Product ID: 5432

The Spresense LTE Extension Board adds LTE connectivity to the Spresense main board and carries an onboard antenna and a nanoSIM cardholder. It also extends the interfaces of the Spresense main board with multiple mic inputs, a headphone jack, and a microSD card slot. The Spresense main board and the Spresense LTE extension board are connected by a board-to-board...

$99.95

3 in stock

Top view of a Pimoroni Rainbow HAT connected to a Raspberry Pi. HAT reads "YARR"

Pimoroni Rainbow HAT for Android Things™ and Raspberry Pi

Product ID: 3354

The Rainbow HAT from Pimoroni has a buffet of sensors, inputs, and displays to explore Android Things™. Use it as a weather station, a clock, a timer or stopwatch, a mood light, or endless other things. Pimoroni collaborated with the Android Things™ team at Google to create this great add-on board that features displays, sensors, sound, and lots of LEDs!...

$24.95

In stock

Tomu

Product ID: 4050

Only 13mm long, Tomu really puts the micro in microprocessor. It's fully open-source development board with the silabs Gecko EFM32HG309 processor, on a little board that can slot right into your computer or laptop USB A port (USB C users will need an adapter). The board feature two tiny LEDs, and two capacitive-touch pads, as well as a native USB bootloader. While it...

$27.50

7 in stock

Angled shot of long black plastic reel with 100 microchips.

Raspberry Pi RP2040 Microcontroller - Surface Mount Chips - 100 Pack

Product ID: 5668

$75.00

1 in stock

Binho Feather / Stemma QT Interface Board

Product ID: 4461

This board makes it easy for you to interface your Binho Nova host adapter with any Feather form-factor device. I2C, SPI, and UART interfaces are all wired up. By default, the 3V3 and 5V rails are connected so that the Binho Nova can power the sensors, but this can be easily disabled by cutting the exposed traces. Additionally, this interface board features a STEMMA...

$7.95

9 in stock

Sony Spresense Extension Board

Product ID: 4418

Spresense is a compact development board based on Sony’s power-efficient multicore microcontroller CXD5602. It allows developers to create IoT applications in a very short time and is supported by the Arduino IDE as well as the more advanced NuttX based SDK. The Spresense Extension Board has the following connectors in addition to Arduino Uno compatible pin...

$45.00

30 in stock

Circuit Playground Classic

Product ID: 3000

Would you like to learn electronics, with an all-in-one board that has sensors and LEDs built in? Circuit Playground is here - and it's the best way to practice programming on real hardware with no soldering or sewing required! This is the Classic version of Circuit Playground, which comes with an ATmega32u4. It's designed to be used with Arduino IDE and code.org CS...

Notify Me

$19.95

Out of stock

Notify Me

Angled shot of a Adafruit METRO 328 Fully Assembled

Adafruit METRO 328 Fully Assembled - Arduino IDE compatible - ATmega328

Product ID: 50

We sure love the ATmega328 here at Adafruit, and we use them a lot for our own projects. The processor has plenty of GPIO, Analog inputs, hardware UART SPI and I2C, timers and PWM galore - just enough for most simple projects. When we need to go small, we use a Metro Mini or a Trinket M0, but when size isn't as much of a concern, we reach for an Adafruit METRO. New!...

Notify Me

$17.50

Out of stock

Notify Me

Adafruit Power Relay FeatherWing

Product ID: 3191

A Feather board without ambition is a Feather board without FeatherWings! This is the Power Relay FeatherWing. It gives you power to control, and control over power. Put simply, you can now turn on and off lamps, fans, solenoids, and other small appliances that run on up to 250VAC or DC power using any Feather board. Compared to our smaller Relay FeatherWings, this...

Notify Me

$9.95

Out of stock

Notify Me

Prototyping feather wing PCB with loose headers

FeatherWing Proto - Prototyping Add-on For All Feather Boards

Product ID: 2884

A Feather board without ambition is a Feather board without FeatherWings! This is the FeatherWing Proto - a prototyping add-on for all Feather boards. Using our Feather Stacking Headers or Feather Female Headers you can connect a FeatherWing on top or bottom of your Feather board and let the board take flight! This has a duplicate breakout for each pin on a Feather,...

Notify Me

$4.95

Out of stock

Notify Me

MicroPython pyboard - v1.1

Product ID: 2390

The pyboard is a compact and powerful electronics development board that runs MicroPython. It connects to your PC over USB, giving you a USB flash drive to save your Python scripts, and a serial Python prompt (a REPL) for instant programming. Requires a micro USB cable, and will work with Windows, Mac and Linux. This is the original pyboard, which is more powerful...

Notify Me

$44.95

Out of stock

Notify Me

Adafruit 0.54" Quad Alphanumeric FeatherWing Display - Red

Product ID: 3130

Display, elegantly, 012345678 or 9! Gaze, hypnotized, at ABCDEFGHIJKLM - well it can display the whole alphabet. You get the point. This is the Red Adafruit 0.54" Dual Alphanumeric Display w/ FeatherWing Combo Pack! We also have these combo packs in Green, White, Yellow-Green, Blue, and Yellow. This is a nice, bright alphanumeric display that shows letters and...

Notify Me

$9.95

Out of stock

Notify Me

Trinket M0 Powered NeoPixel Goggle Kit Pack

Product ID: 2221

One of the most popular Trinket projects now has its own kit pack! Make your very own programmable NeoPixel goggles with 2 x 16 LED rings and an Adafruit Trinket. It even comes with a rechargeable LiPoly battery and charger. It's a great easy build and when you're done you'll have the coolest accessory. Follow along with our popular Kaleidoscope Eyes tutorial. The...

Notify Me

$39.95

Out of stock

Notify Me

Assembled Terminal Block Breakout FeatherWing for all Feathers

Product ID: 2926

The Terminal Block Breakout FeatherWing kit is like the Golden Eagle of prototyping FeatherWings (eg. majestic, powerful, good-looking). To start, you get a nice prototyping area underneath your Feather, with extra pads for ground, 3.3V and SDA/SCL. Not one to stop there, we expanded the PCB out to 2" x 2.5" with 3.5mm pitch terminal blocks down each side. There's...

Notify Me

$14.95

Out of stock

Notify Me

Adafruit 0.8" 8x16 LED Matrix FeatherWing Display Kit - White

Product ID: 3149

Notify Me

$19.95

Out of stock

Notify Me

Adafruit 0.54" Quad Alphanumeric FeatherWing Display - Blue

Product ID: 3128

Display, elegantly, 012345678 or 9! Gaze, hypnotized, at ABCDEFGHIJKLM - well it can display the whole alphabet. You get the point. This is the Blue Adafruit 0.54" Dual Alphanumeric FeatherWing Display Combo Pack! We also have these combo packs in Green, Red, White, Yellow-Green and Yellow. This is a nice, bright alphanumeric display that shows letters and numbers in...

Notify Me

$13.95

Out of stock

Notify Me

Adafruit 0.54" Quad Alphanumeric FeatherWing Display - Yellow

Product ID: 3131

Display, elegantly, 012345678 or 9! Gaze, hypnotized, at ABCDEFGHIJKLM - well it can display the whole alphabet. You get the point. This is the Yellow Adafruit 0.54" Dual Alphanumeric Display w/ FeatherWing Combo Pack! We also have these combo packs in Green, Red, Yellow-Green, Blue, and White. This is a nice, bright alphanumeric display that shows letters and...

Notify Me

$10.50

Out of stock

Notify Me

Getting Started with Adafruit Trinket book along with a collection of electronic parts included in kit.

Getting Started with Trinket Book + NeoPixel Goggles Pack

Product ID: 2290

Pickup a copy of Getting Started with Adafruit Trinket and then hit the ground running with one of the most popular Trinket projects: the Trinket-Powered NeoPixel Goggle Kit Pack! This pack is perfect for somebody who is up for a little challenge and eager to dive further into the wonderful world of Adafruit Trinket. This pack includes the Getting Started book and...

Notify Me

$49.95

Out of stock

Notify Me

Adafruit 0.56" 4-Digit 7-Segment FeatherWing Display

Product ID: 3140

One segment? No way dude! 7-Segments for life! This is the Adafruit 0.56" 4-Digit 7-Segment Display w/ FeatherWing Combo Pack! We have these combo packs in Green, Blue, Red, White, and Yellow! 7-Segment Matrices like these are 'multiplexed' - so to control all the seven-segment LEDs you need 14 pins. That's a lot of pins, and there are driver chips like the MAX7219...